Can I use one GBIP-Interface with two programs at the same time?

Hi, I have one PCI-GBIP-controller with multiple instruments installed. Now I want to use these instruments with two differents programs at the same time.
E.g.: program 1 uses GPIB0::1 and GPIB0::3
and program 2 uses GPIB0::4 and GPIB0::7
Is this possible??
When I have tried to do this, I always got timeout errors..
Thanx in advance.
Philipp

Hi,
You shouldn't have any problems accessing different devices from different programs using the same interface. I even used the two VIs to communicate with the same device. Although not the best approach, VISA didn't return any errors.
DiegoF.

Similar Messages

Using a Dell 2407WFP with two Macs at the same time?

Hi ... I have a Dell Ultrasharp 24" WFP display that I was using with my old G4. Connectivity isn't the issue ... it works beautifully on both the G4 and my new Mini. I've read that I can put the VGA cable on the G4 (no biggie -- it's what I was using before) and I have the DVI on the Mini.
What I want to know is: Can I (and is it wise to) have both machines running at the same time and toggle the display between the two or should I keep one machine off when the other is on? There is a button on the display for toggling between a variety of displays.
I've activated file sharing, etc. on the old box, but there are some things I still can't do unless I'm on the G4 desktop -- mostly my graphic apps. I've been holding off from swapping cables around, but now it's getting to the point that I need to get back on the G4 because of apps that I don't have on the Mini.
I haven't put the VGA cable back on the G4 yet. It seems like it -should- work -- I just need some verification that it will or won't futz up something. I think what I might be most concerned about is that the monitor isn't powerful enough to run both machines at the same time, but I could be wrong.
The info at the Dell site is somewhat dated.
TIA!

I use a KVM switch with a Dell monitor that has DVI and VGA inputs. I only route the K an M portions (keyboard and mouse) through the switch. The computers connect directly via VGA and DVI to the Monitor, and then I use the monitor's switch to make the video switch. Works fine. Don't worry about taxing the monitor.
I'd suggest buying the KVM switch from a vendor with easy return policies, since it can take a few tries to find a model you like.

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

Can i use my mac mini for some users at the same time?

can i use my mac mini for some users at the same time? i mean with their own screen, mouse, and keyboard

If you're asking whether more than one user can use the computer at the same time with multiple displays, the answer is no. Other users can log in over a network with Screen Sharing, but each one will need his own computer (not necessarily a Mac.)

Can I use both Wifi and a Lan connection at the same time?

With me back in the dorms I have been limited to a slower connection than what I would like. Now we are able to use both Wifi and a Lan line so I was wondering to somewhat "double" my speed if there was any way to use both connections at the same time.
Now I know that you can have both plugged in at the same time, I guess what I'm asking is, is there a way that I could set programs to use one or the other? Or some kind of virtual desktop that is set to use the other connection or anything that would allow both be used at the same time.
Or am I just wishing for something that doesn't have any possible way to work?
-nathan
MacBook pro 2.16 C2D 2gb ram Mac OS X (10.4.8)

You can use both at the same time, but not gor Internet access if that's what you're asking.
Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
Sorry.

Apex mixes applications working with two windows at the same time

Hi all, while developing in Apex I have found the following problem:
Working with two different applications at the same time, the browser goes from one to another indistinctly.
To reproduce the problem:
1. Open the same application builder in two different Firefox windows
2. Open a different application in each window (In my case: application 103 in window1 and application 105 in window2)
3. Go to shared components in both windows (window1 first)
- window1 breadcrumbs show: Home > Application Builder > Application 103 > Shared Components
- window2 breadcrumbs show: Home > Application Builder > Application 105 > Shared Components
4. Click in any shared component in window1 (Templates, Authentication Schemes...)
- window1 breadcrumbs show: Home > Application Builder > Application *105* > Shared Components > Templates (Application 105 instead of 103)
Is it a bug? I have read the known issues [[Here]|http://www.oracle.com/technetwork/developer-tools/apex/downloads/apex402knownissues-189793.html] but it does not appear.
Related Data:
Application Express version 4.0.2.00.07
Firefox 3.6.15
SO: Windows XP
The error is not reproduced with IE7. I have not tested any other browser.
Regards,
Molina

If you tried opening up two pages in the same application each of which modifies the same page items, you would notice the same issue.
This is because, in a session there is only one set of values for page items(or application items) and every parallel call to the same page would update the same bind variables.
Now the development environment or Apex Builder is also an apex application , and when try and open up the pages as you mentioned, they both access the same Application Builder page and sets/resets any existing values for those variables(and maybe cookies too if they are being used) , hence the 'mixing up'.
If that didn't convince you, check the URL of both the pages when you load them, they should show the same page number ( f?p=APP_ID:PAGE_NUMBER syntax). Imagine if the same approach was done with one of your application pages, say an edit form opened from a report with multiple records in multiple tabs like what happened with this case: {message:id=9346663}
So this really isn't a bug in a way, because that is how session states in apex is/was maintained. Ofcourse if they used another kind of development platform for building pages, it may have been avoided, but thats an altogether different point in itself.

How can i use an barcode scanner and a keyboard at the same time on Ipad

HI I am looking to find a way to use a barcode scanner and the on screen key bard at the same time, so far i cant seem to find a way to do it.
Does any one know how this can be done.
thanks

It is possible, I use multiple versions, however Firefox official policy is that you use firefox3.6 or 5 ; not firefox 4 which is not secure and not supported.
The easiest solution may be to use firefox portable http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 although firefox 3.6 will itself not be supported for much longer.

HT1296 can i use one outlook account with two icloud accounts

I am running MS outlook 2010 on Windows XP platform and my wife and I both have iCloud accounts. I wanted to know whether or not both iCloud accounts could be automatically synced with my MS Outlook contacts/calendars.
I have no problem using one account at a time but hate the idea of having to toggle between the two accounts to keep outlook current.
Thank you.

Yes you can, iTunes will identify your phone by serial number and phone number.
Best if you can to set different name to your phone under SETTINGS/GENERAL/ABOUT/Name and to name like e.g. iphone3G and the other iPhone 4s.
So everytime you sync, itunes will backup your phone's contents and data and you will be able to identify from the backup files correctly in future.

Can I use one itune account with two iphones

I now have two iphones can you have one itune account and keep your contacts separate, I dont care about apps

Yes you can, iTunes will identify your phone by serial number and phone number.
Best if you can to set different name to your phone under SETTINGS/GENERAL/ABOUT/Name and to name like e.g. iphone3G and the other iPhone 4s.
So everytime you sync, itunes will backup your phone's contents and data and you will be able to identify from the backup files correctly in future.

Using mainstage with two instruments at the same time

Hi, I'm using an M-Audio firewire solo as an interface with my macbook. I have a usb keyboard and want to play guitar as well, switching between the two onstage. My question is, how do I get the outputs to the soundboard so they can be mixed separately? The interface has two inputs and balanced outputs (ch1 and ch2). I want channel 1 (gtr) to go to ch1 of the output and channel 2 (keys) to go to ch2 of the output so they can be mixed to the front of house and monitor mixes. Is this even possible using mainstage or logic, or even by just using the headphone out on the macbook?

Since MainStage only deals with outputs in stereo. You'll need to do some panning. Pan your Guitar fully LEFT, and your keys fully RIGHT. That'll give you two separate outputs....
FYI, there are some issues with panning in MainStage 2. So, to get around this.... Create two Sub Aux channels. One called Guitar Out, and the other Keys Out. Do your panning there and not on the individual channels. And send channel one to the Guitar Out Aux, and the Keys to Keys Out Aux.

How can I work with two images at the same time?

I have downloaded Photoshop Elements 10 and I can not find the buttons for Minimize or Reset for the image. If I rightclick the miniature those options are grey. If I open two images so I have two miniatures in the holder and then go to Windows and Images the option Show Overlapping is grey but I can show Side by side. Then I can only shut down the images.
Thanks for help
Bibbi

Open the Editor and on the menu bar click:
Edit à Preferences à General
Check the box “Allow Floating documents in Full Edit Mode” and click OK.

Here we go. I have all Ke$ha's albums but there's a problem. There's ONE song includes in TWO albums at the same time. I want to have a full albums but I don't want to have a several identical songs.

There's TWO albums of Ke$ha:
One of them is studio album "Warrior" with song "Die Young" BUT there's a EP "Deconstructed" with the same song. What can I do to make one song be included in two albums?
Sorry for SO BAD english. I'm from Russia and my english is absolutely terrible

Are you trying to save money or space?
You can make a copy of a song and give it different properties.
You cannot make iTunes use the same audio data for two different tracks in two different albums.
tt2

3.2.3;Swing app.; Cannot work with two applications at the same time.

Hi guys,
I bring this problem here may somebody experienced that.
I developed two client side applications(applets) with JDev3.2.3.
Locate them on Apache/Tomcat. There is also a
Index.html file with two links, so when user clicks on
each link the associated application will downloaded
on his/her PC and ready to work. (In index.html I used
JavaScript function window.open(…) to load the applications)
Now please see this scenario:
1-I ran/loaded both application in two separate
browsers(IE5.5). And tried to work with them(minimized
one and work with another). Soon I faced unexpected
frizzing/locking or very slow running on both
applications.
2-Then closed/killed one of them(killed IE). Then
re-executed same application again. The application
loaded with the last activated screen . Seems it never
killed and it was still alive.
3- The only way to successfully working is one by one.
Means execute & work with one, then kill that, and
then execute and work with another. Which is not expected
in the Windows enviroment.
To Debug:
When both applications were running(each on it’s own
IE), I opened the Task Manager and saw there was only
one IEXPLORER.EXE was running, also there was only one
Java VM (a little bird icon) on right-bottom of the
screen.
I believe this causes the problem. Seems they both
running in the same session. Since I opened two
applications in two IE I was expected to see two
IEXPLORER.EXE with two JVM. Am I right? Do you think
so?
Any way, Now I am seeking to find the solution. My
primary mind says probably I should not use
window.open(..) in index.html to load the
applications.
Would appreciate any command on this.

Same thing with me! My microphone doesn't even register in anything but ventrilo!
It's dri'ves me NUTS! I bought the card (xfi fatalty) for a really good price, but I almost regret even looking into the soundcard because of this bug. I know Vista is a new operating system..but I figure'd this kind of update should have been noticed MUCH earlier..
Please creative, can you fix this?
On another note..is there a sound quality difference between using an x-fi in vista vs xp?
*not meaning to thread jack*
finally..
you should probably close the other thread.. You made two, you know.

Can I recibe messages in imessage at two iphone at the same time?

I sold my iphone 4 and i bought an iphone 5, i just changed my SIM to keep the same number i had, but yesterday i received an imessage from one contact of the person who i sold my iphone to, and all the conversation. My question is, could this person receive the messages i send? can he see my conversations? or just i can see the conversations of him?
The another question is: how can i turn off the number of that person to stop sharing Imessage?

Julio Fdez wrote:
I erased first and then i loged out!
That's not even possible... You can't log out AFTER you erase the phone. Obviously you don't know what you did.
Is the person who purchase the phone someone you're on good terms with? If so, you need to get hold of them, and get together so that you can remove your information from the phone properly and wipe it.

Can I use Find My IPad with 2 ipads on the same apple account?

I have an iPad and my husband has an iPad2. When I signed up his iPad on the app Find My iPhone/iPad, I lost my iPad's info...

I am using 3 idevices on my account. So, yes.

Can I use one GBIP-Interface with two programs at the same time?

Similar Messages

Maybe you are looking for