Can i use one pc with one installation of Itunes to use with multiple apple ID's?

can i use a single pc with one edition of itunes to manage multiple apple id's (without everyone's mail and message popping up on eachothers ipads/iphones etc)?

You would need the apps installed on both volumes. The versions installed on your 10.4 drive will most likely give you a "You cannot use this version, etc..." error if you try to launch them from a 10.5 volume. Some apps may run but you will end up "confusing" the system as to which instance of the app you want it to use.

Similar Messages

TS3367 If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

My iphone 5 don't want to connect with itunes, what can I do... I have an itune reedem card with a balance $15.05 but I can buy anything

My iphone 5 don't want to connect with itunes, what can I do... I have an itune reedem card with a balance $15.05 but I can buy anything

It seems as though you are describing two different things, unless you are trying to say that you cannot connect to the iTunes Store on through the phone. If that is correct, suggest you try and do a search, the question has been asked a great deal and answers can be found. Maybe even try and describe the error message you are seeing when trying to connect.

Iphone won't sync with new installation of iTunes

I had to reinstall iTunes in a new laptop, and then copied my music library-file from the old iTunes-installation. Now the iPhone won't sync the music files. For some of the music I've bought in iTunes it says "You have to copy this music manually", but there is no such option in iTunes, as far as I can see. And by the way, afterinstalling 5.0.1 my contact-information is trippled, or every name and phone etc. is listed three times.

Try uninstalling then reinstalling iTunes. See the iTunes support page (http://www.apple.com/support/itunes/) on how to do this.

Can I share a library between two installations of iTunes on a dual-boot PC

Hi,
I would like to dual boot between Windows XP and Windows 7 (x64). If I install iTunes under both versions of Windows can I configure them to share the same iTunes library on disk?
Ie, when add music and create playlists under Windows XP; then boot across to Windows 7, I'd expect iTunes there to instantly see the same new music and playlist information.
To make this simpler I'd like to store my music library on an "E:" volume that has the same drive letter under both XP and 7.

a couple of things - to do this all macs must have the same version of iPhoto
If you are using the Time Capsule for Time Machine you should not put your iPhoto library on the same volume - you either need to create a disk image on the TC for your iPhoto library or partition the TC so there is a TM volume and another one for iPhoto
LN

Problems with the installation of iTunes on Windows Vista

When I download any version of itunes error occurs' Microsoft.VC80.CRT, Version =8.0.50727.4053'',''type =''win32'',''1fc8b3b9 ... publicKeyToken = Architecture =''or86''. Please refer to Help and Support for more information. HRESULT: 0x800736FD'. How can I solve this problem?

HRESULT: 0x800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?)

HT201269 I have had my laptop stolen with my itunes account on it with all my music/ films/ apps etc. Can I reverse back up my new laptop with itunes installed from my multiple apple devces?

I have had my laptop stolen with my itunes account on it with all of my music/ films/ apps etc. Can I reverse back up my new laptop loaded with itunes installed from my ipad and iphone apple devices?

Follow the directions here:
https://discussions.apple.com/docs/DOC-3141

Help! I can't get three movies that I purchased from iTunes to sync with my iPod classic. Anyone have any suggestions?

When I sync my iPod classic with iTunes, it doesn't download three movies that I purchased from iTunes. Anyone have any idea why and what I need to do about it?

We could if we had a little more information.
What is happening when you try to sync them?
Any error messages or numbers?
What version of iOS are you using?
What country are you located in?

My playlists only appear in itunes when my ipod is connected, and it will not allow me to drag songs into playlists from the music library, can anyone help. Have downloaded newest version of itunes and using windows xp.

My Playlist only appear in the itunes when the ipod is connected , and I can not drag a song into a playlist, Also I repeatedly get a message to authorize the songs purchased in order to sync the ipod. I followed the instructions in the help menu on doing this but nothing seems to work, Help anybody ? Have installed the lastest version of itunes and I'm running windows XP. Thanks

Is it possible that you are not seeing the thirteenth song because you did not scroll all the way down within the playlist?
Hope this helps!
PSkilton

Can I view a TV show from my PC iTunes to MacBook with sharing via iTunes?

The TV show shows up in the shared library file on my MacBook. Seems I am having trouble with this; will not load the TV show via my shared library in my MacBook. I am coming to the conclusion that you cannot watch a TV show in my MacBook iTunes from my PC iTunes shared library. Is that correct?

Weird, pulled out my powerbook and was able to view the TV shows via iTunes but somehow iTunes on the macbook would not load the TV show from my PC. Guess I will keep trying.

My apple id do not work with app store and itunes it say's this apple id has not yet been used in the itunes store?

please help me guys, and thank's in advance for the help..

On your computer, iTunes>Store>View My Account>Apple ID Summary>Payment Type...you need to make sure your credit card info is correct/entered here. If you don't have a credit card, follow these directions:
http://support.apple.com/kb/HT2534

I can't purchase anything even though I redeemed an iTunes card for $15. Apple is asking to verify my credit card info, and also for answers to security codes that are not mine.

Okay so I just got an iPhone 5. My first iPhone. In the past I've had two different iPods, an iPod Touch 3rd Generation, and an iPad 2.
I only have 87 cents in my bank account so I paid cash for a $15 iTunes card so I could get some applications on my new iPhone 5. I realize that iTunes won't let me download updates or buy new applications when my bank account has a low or insufficient balance, so it will ask to verify the code on the back of the card. After entering the code, it says to please enter valid information. The information is valid, but won't be accepted because it has a low balance.
I tried selecting "None" as my payment options to see if that would allow me to make purchases using the $15 balance I just redeemed from the iTunes card. It doesn't seem to help the situation.
I went to contact Apple, but I had to schedule a call (this is the first time I've ever had to contact support for a problem - ever). I also sent in an email hoping I would get a response sooner. I want to play with my phone now, not in a few days when they can finally call me back...
While trying to figure out a solution to this, I ran into a couple of security questions that aren't even mine... They can't be because I don't have an answer for them. These security codes are not mine. I tried putting in an answer and it didn't work - obviously, because the questions don't apply to me. What the heck is going on Apple? I've never had so much trouble with your services before.
I'm not very happy right now.

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

2 out of 5 user one PC unable to connect to itune store

2 out of 5 user one PC unable to connect to itune store, using vista. I remove and reistall itunes, I am able to access the internet through browser, but not through itunes, firewall is turnoff. What else can I try?

The "..at this time" message" sometimes appears when an atypical home folder (eg. one on a network share) isn't available for some reason. I don't use "Filevault", but that might qualify as atypical, since the home of a "Filevault" account actually resides on a disk image.
Since you were able to attach and mount the ".sparseimage", it would appear that at least your ".sparseimage" is not corrupt, so the most dreaded reason for being unable to log in to a "filevault" account fortunately doesn't apply. Before attempting to troubleshoot this issue, just make sure that you are able to "mount" your backup copy to make sure it transferred successfully.
I'm guessing but it could be that by attempting to change the account password using the disk, the repair tech created a situation where the "account password" does not match the ".sparseimage" password. The two must be in agreement for login to proceed smoothly, and this is why the "Accounts" pref pane will not let you change a "Filevault" account password unless you are actually logged in to that account. By using the disk, the tech bypassed this safeguard. The first thing to do would be to try to reset your "account password" - there are other ways to do this, one of which is to boot the computer from the installer disk to use the "Reset Password" function.
http://docs.info.apple.com/article.html?artnum=106156
Make sure to set it to exactly what it was before - ie. identical to the password that is known to have unlocked the ".sparseimage" file. Then reboot and see if you can log in with that password. If not, log in to any other account, open "/Applications" > "Utilities" > "Terminal.app" and post the output of this command, substituting the appropriate username:<pre>nicl . -read /users/username</pre>

ARIS with SolMan - installation/configuration guides pls...

Hello All,
Can anybody of you please share any installation/configuration guides you used/prepared when you installed/configured the interaction between ARIS & Solution Manager?
Your help will be greatly appreciated pls.
Thanks & Best regds,
Alagammai.

Hi ,
Could you please send me the Configuration Document/.sim files on ARIS with Solman,..to my email id : [email protected] as well..
Thanks
Vinni..
Edited by: Vinni8797 on Jan 29, 2008 6:33 PM

Applocker with Windows Installer rules and SCCM 2012

Hi,
We have been running Applocker since two years on Windows 7 Enterprise clients with SCCM 2007 as management and distribution tool.
This setup was working fine until we migrated to SCCM 2012 and started to encounter problems with msi-packages not being able to self-heal when the source was the sccm client cache.
We have recreated this scenario in a lab environment.
Our setup is this:
Windows 2008 R2 (DC)
Windows 7 Enterprise SP1 (Client)
Standard user (not admin)
SCCM 2012 R2 (upgraded from 2007)
Applocker with these rules:
Executable Default rules enabled (Enforced)
Windows Installer Default rules enabled (Enforced)
Exception for %WINDIR% (where SCCM cache is located)
Script Default Rules enabled (Enforced)
Application msi-package with self-heal (omus) and advertised shortcuts
We install the application from the sccm cache (%windir%\ccmcache) and then trigger a self-heal (user components being copied to the user profile).
What we see on the client is: Error 1718. File C:\Windows\ccmcache\54\application.msi was rejected by digital signature policy.
Event log is showing: Event 1008: The installation of
C:\Windows\ccmcache\54\application.msi
is not permitted due to an error in software restriction policy processing. The object cannot be trusted.
It looks like the file cannot be evaluated by Applocker and therefore is not trusted. We get an Access Denied error when testing AppLocker-policy with the following PS-command,
Get-AppLockerPolicy -Effective | Test-AppLockerPolicy -Path C:\Windows\ccmcache\54\application.msi. This command works fine when accessing files in the cache-folder on a SCCM2007-client.
For testing purposes we recreated a similar folder structure: C:\Windows\Folder1\Folder2\application.msi where the user has no permissions on Folder2 and read on the other folders and the File.msi.
This is how the permissions look like in SCCM 2012 (no user permissions on %Windir%\ccmcache). Applocker cannot evaluate the trust-level of application.msi.
The GPO setting “Bypass traverse checking” is set to everyone.
As we can see, the permissions are the same on SCCM 2007 client cache (%Windir%\syswow64\ccm\cache) but we do not have this issue there.
Has anyone got Applocker (with windows installer rules actived) to work with SCCM 2012 and windows installer self-heal?

More info. I found some people also encounter this same issue, but specific msi, take a look at
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2ad92754-f01e-410e-97db-7a9bc81586db/msiinstaller-event-1008-when-trying-to-install-3ds-max-2011-after-group-policies-apply-on-domain?forum=winserverGP
Juke Chou
TechNet Community Support

Can i use one pc with one installation of Itunes to use with multiple apple ID's?

Similar Messages

Maybe you are looking for