Can i use one router connected to my cable modem and another....

can i use one router to connect to my cable modem them have another (not connected to a modem) and a wireless reciver so i can plug my xbox 360 into it?

 Yes you can do that ... but you need to configure the computer connect to the Router using Cable ....
Afterwards ... you can work on mutiple computers ...

Similar Messages

  • Can I use the Airport Express as a cable modem?

    I am trying to set up wireless internet in my home, and I am planning to purchase an Airport Express. Can I use the Airport Express as a cable modem, or do I have to purchase a modem from the ISP and then connect the AE to the output of the cable modem?
    Thanks,
    Adrian

    No, the AirPort base stations do not perform the functions of a DSL or cable modem, so you will still need to acquire one.

  • Can I use one LR license on both a PC and Mac?

    Do I have to buy two of the Lightroom product to be able to use it on my Windows computer at work and my MacBook Pro at home?

    You can use the disks on both Windows and Mac unless you purchased a single platform download.

  • I have an older Airport Base Snow that I gave to my brother to use for his apartment. It's connected to a cable modem and I have a network but it is not protected. How do I set a password? There is no computer in this setup, just an iPad

    I Have an older Snow Airport Base that I gave to my brother to use in his apartment. It is connected to a cable router. I have a network established but it is not secure. How do I password protect this network? There is no computer in this setup, only an iPad. Thanks!

    If this base station is actually the "snow" then you will need a Mac or PC that can run a version of the AirPort Utility that can administer this "very old" 802.11b base station. You won't be able to do so with an iOS device or Mac running Lion or newer OS.

  • Connecting Motorola SB6121 Cable Modem and AirPort Extreme

    I moved into a new house a couple of days ago so of course the first thing that I needed to do was get the home wireless up and running. My ISP is through Comcast. I purchased my own cable modem (Motorola SB6121) instead of renting and used my own AirPort Extreme as the wireless router.
    First, if you're purchasing your own cable modem, you will need to contact your ISP and provide them with the HFC MAC ID on the cable modem. Once you've gone through the motions, you will be able to connect your Mac (in my case Macbook) directly to the modem via ethernet cable and access the internet.
    Issue:
    When I connected the SB6121 to the AE, I could connect wirelessly to the AE, but I did not have access to the internet. So, basically the SB6121 and the AE were not talking to each other despite being physically connected via ethernet cable.
    Solution:
    After days of searching for online answers and forums (and trying different solutions) I was able to successfully get everything up and running. Make sure that you have 2 ethernet cables available.
    Here are the steps.
    I restored my AE to factory settings just to keep everything simple. Here are instructions: http://support.apple.com/kb/HT3728 Once you've restored your AE, make sure that both the AE and the cable modem are unplugged from their power sources.
    Plug in the power to the SB6121.
    Connect your SB6121 directly to your laptop via Ethernet cable. Test to ensure that you have internet accessibility by going to any website.
    Remove the ethernet cable from your laptop and plug it into the "internet in" jack in the back of the AE.
    Power up the AE.
    Connect your laptop to the back of the AE using ethernet cable #2.
    Launch a browser. You should now be able to successfully connect to any website.
    Assuming that you reset your AE to factory settings, it should just be broadcasting the generic "Airport Extreme" SSID. Disconnect the ethernet cable and connect using wireless to the SSID. Launch a browser and you should be able to connect to the internet.
    You can now use the AirPort Utility to configure the AirPort settings.
    I assume that this solution would work with any of the base stations.

    I was having the exact same issue tonight.  Just purchased the AE Model A1408 and haven't been able to maintain an internet connection on my iMac whenever I tried hooking it up via the Airport Utility application.  So after I had the SB6121 connected to the AE and the AE connected to my PC with no luck, I then went to the Network icon in System Preferences.  Clicked on "Assist me...".  Then clicked on "Diagnostics..." and followed the directions which basically had me first power down the SB6121 modem and power it back up.  Then I powered down the AE router and powered it back up.  At that point I was now getting an internet connection.  I then took my ipad 2 and went to the Wi-Fi settings and noticed it was asking me to setup a network through my AE.  I selected that and went through the simple steps to set up the network and password and now it all works.  I am a novice so don't ask me why but I now get a green solid light on my AE.  I can connect other devices wirelessly. I can still access the internet on my iMac.  For whatever reason, using the Airport Utility on the iMac doesn't work in my case and using my ipad to set up the wireless network did the job.

  • Connect extreme to cable modem and wifi to computer?

    Currently have dsl connected to extreme then wired to Mac. Considering cable but existing port across the room, prefer not to create another or string a line on the ceiling. Must there be a wired connection to a home computer or can extreme connect to modem and wirelessly interface with Mac ( plus iPad iPhones and apple tv)?

    It is also an Ethernet router - wired and wireless.

  • EA3500 loses connection to Arris cable modem and goes dormant

    Just installed the EA3500 within the last 2 weeks. I've had 3 instances now where I come home
    from work and the port light on the cable modem is not blinking to indicate a valid connection to
    the router, all connections to Comcast are green and working. Unplugging the power to the
    EA3500 causing a reboot brings the connection back up. Would appreciate hints on how to 
    debug this - firmware appears to be the latest and greatest (1.1.39.145204). The cable modem
    connection to my older D-link router worked fine without issues. I have 1 hardwired link on the
    router to a Dell desktop system and an array of wireless devices, all are dead to the net when
    the router acts like this. One last piece of info- only the power light appears green when it's in
    the hung state - the yellow and green LEDs to the hardwired link go dark.
    Thanks for any help,
    Chris

    What setting do you have for your Internet connection in the router?
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • Can you use one iMac with two iphones for updates and itunes? It erased my husband's apps on his phone when I tried to sync.

    I am sure there is a way to sync both my iphone and my husband's iphone on our one iMac...when I connected my husband's for the first time it recognized it as a different phone, but would let me save his apps to itunes like it saved mine earlier...  can we have both of our iphone's info on our one itunes account?

    When you connected his iphone did you click File>Transfer Purchases?
    This would transfer any ituens purchases from iphone to computer.
    You can sync as many iphones as you like to one computer/account/library.

  • Can I use one infosource to update data to CUBE and ODS???

    Hi all,
    Can anyone tell me if I can load data to OSD and Cube from one the same InfoSource? As I know, I have to have "0recordmode"(update mode) in communication structure for ODS not for Cube.  So how can ODS and Cube use the same Infosucre to update data?
    Thank you

    John,
    Depending on the volume of data and the type of infosource, sometime one update to ODS first and then subsequently update to the Cube or update both cube and ODS in parallel.
    For example, if you use AR or AP line item datasources, since you are extracting from both open line and closed line items tables, there could be multiple records for the same thing coming through.  First when it appears as an open line item, and when it is paid, it appears again as a paid line item so if you update directly to the cube, you can have multiples of the real value.  Thus in this instance you update from infosource to ODS then subsequently use delta update from ODS to cube.   CCA and C0-PA on delta mode are example where there are no overlapping, thus you can update both ODS and Cube at the same time.
    Hope this helps,
    Mary

  • My laptop is connected to company LAN on wire and I have another active wifi connection provided by a router. Can I use the wifi connection for mozilla connection and the wired for everything else? I'm on Win7.

    I have 2 simultaneous active connections:
    no1: wired connection to company lan; private IP 172.19..
    no2: wireless connection to unrestricted traffic router; private IP: 192.168...
    my question: can I use the wireless connection for mozilla traffic and the wired for everything else?
    I'm on Windows7 Prof, all security updates installed.

    Go to Control Panel > Network and Internet > Network and Sharing Center >
    Click Change adapter settings from left panel > Open the network connection you want to change the DNS servers for by right click and select Properties > Select
    Internet Protocol Version 4 (TCP/IPv4) and click Properties button > Choose the
    Use the following DNS server addresses > enter the IP address for a
    Preferred DNS server as well as an Alternate DNS server.
    Primary DNS: 8.8.8.8
    Secondary DNS: 8.8.4.4
    This IP belongs to Google public DNS.
    Note: Wired connections are usually labeled as Ethernet, while wireless ones are usually labeled as
    Wi-Fi or Wireless Network Connection.
    Uncheck Internet Protocol version 6
    Mark as Answer if it's worked. Thanks. Balamurugan_Subramaniyan

  • Can i use single database connection in a hole java application?

    can i use single database connection in a hole java application?.I have so many forms to use database connection.

    Theoretically you can. Not only theoretically. I've seen lots of application which only uses one database connection (they were using, oracle or mysql)
    The first reply given here assumed that the answer to
    your question depends only on the design of your
    application. That is not true.Yes it's true. Nothing in the original questions says that you aren't allowed to open or close the single connection that you have. It's looks more like the OP is interested in sharing a connection (i.e having a singleton or a connection pool with only one connection)
    It does also depend on the behaviour of the database
    in the background.
    Most databases have a time out for connections that
    are idle Not a problem. Most implementations of connection pools and applications which keeps a connection open have a timer which calls e.g. select * from dual (if you are using oracle) when the connection has been idle for X minutes.
    (some, like db2 on z/OS, even cancel
    connections, that are not idle, if they are open a
    certain amount of time or have reached a given limit
    of cpu seconds.)You would also have that problem if you had a connection pool with several connections.
    In essence: If you have no control over the time
    your application runs (and therefore your connection
    is open) or over type or the configuration of the
    database you are accessing, you can't do it.See above.
    The closest thing to what you want would be using
    PooledConnections, iif those are supported for the
    database you want to access.Not true.
    Kaj

  • When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other?

    When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other? In the Migration tool, I was only given the option of choosing the computer when it appeared on the same network, and didn't see an option to connect them to each other. Even though they're both connected to the same network with a wired connection, the migration is painfully slow.

    Yes. The following quotation is from About Windows Migration Assistant
    These are the preferred network connections, in order:
    Use a CAT6-certified Ethernet cable that is in good condition to connect the Ethernet port of the PC directly to the Ethernet port of the Mac or Ethernet adaptor (USB or Thunderbolt). You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
    Use CAT6-certified Ethernet cables that are in good condition to connect the Mac and PC to your home network router/hub/switch. You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
    For wireless, use the fastest wireless signal possible (802.11n 5Ghz). Try to have the PC, Mac, and the wireless access point all in the same room close to each other.

  • Can I use one photoshop cc subscription on all three macs we use?

    We have three Macs in use. Can we use one CC Photoshop + Lightroom subsctription across all three?

    Creative Cloud Help | Creative Cloud / Common Questions
    Do I need to be online to access my desktop apps?
      No, the desktop applications in Creative Cloud, such as Photoshop and Illustrator, are installed directly on your computer, so you don’t need an ongoing Internet connection to use them.
      An Internet connection is required the first time you install and license your apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
      Annual members can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.

  • Can I use HDMI to connect my AXC-603G features Intel HD Graphics to a monitor

    My AXC-603G features Intel HD Graphics but only comes with a VGA connector and HDMI.  My Dell monitor does have an HDMI connector.  Can I Use HDMI to connect the two?

    Yes, you can use the HDMI port on the computer to conenct the DEL monitor.Once the cable is conencted , you may press and hold the windows key and tap the P key for option to project display on to your monitor. You can also press and hold the windows key and tap the K key Click Second screen and then choose one of these options: Duplicate - You will see the same on both screens.Extend - Your screen is now spread over two monitors, and you can drag and move items between the two.Second screen only - You will see everything on the screen you just connected. The other screen remains blank.  Click the Kudos to say “Thanks” for helping! select "Accept Solution" if your issue is resovled.

  • I can't use Raid Admin connect to Raid

    Hi All,
    i can't use raid admin connect to my Xraid.
    network is ok, networkcable is ok.Raid works find.
    when i use raid admin connect to Xraid, it shows me"connection error" and then the app take more than 50% cpu usage.
    any ideas?

    Hi Chris,
    If the controllers are not properly seated in the RAID chassis, they will not be able to communicate with RAID Admin and you will get a connection error. Improperly seated controllers can lead to other problems as well, so I would recommend reseating them.
    To do this, power down the RAID by pushing the power button on the back and holding it for about 5 seconds. The RAID will not power off completely, but all the indicator lights on the front of the chassis should go out. Once those lights are out, unplug both power cables. Release one of the controller cards by pushing inward on both clips, then pull the card about half way out. Push it back in gently until both clips click into place. Do the same with the other controller card. Plug both power cords in and push the power button to power the RAID back on.
    You should either unmount your RAID from your server, or power the server off before you power off the RAID. You can power your server back on once all the indicator lights on your RAID show green. If you have just unmounted it, it should mount automatically once the RAID controllers are up and running.
    Hope this helps.
    -Phoenix

Maybe you are looking for

  • Can I access my purchased music on multiple computers?

    Whenever I buy music from the itunes music store, I want to transfer it to and from home and work. I generally make an MP3 disk because of a large playlist and so I don't have to tote/waste multiple disks, but you can't convert itunes purchses to MP3

  • Internet connection and USB

    I am having problems with my MSI KT4V motherboard and the internet connection. When any USB device is connected to the computer and I try to connect to the internet Via ISDN the computer dails and connects to the server but the connection is not conf

  • VA01 Shedule Lines - Confirmed Quantity

    Hi there? I have a requirement for Sales Orders created via IDocs, according the material batch change the confirmed quantity to cero, even when inventory is available. I have been searching for a user exit to include this logic, but still I have not

  • WS Security Error

    Hi! I'm new on WS and I've got a security error when I try to invoke my WS Error: <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" x

  • New NVIDIA Win2K/XP 42.81 | 42.86 Driver

    http://www.warp2search.net/article.php?sid=10284&mode=thread&order=0