Can i use one single fibre to make a DPT ring.

i don't want protection , may i just user one outer ring or inner ring to make a DPT ring.
can i use DPT line card as a normal pos interface
thank you!
tom

"may i just user one outer ring or inner ring to make a DPT ring"
As per my knowledge DPT will not work in one fiber. As data flows in one fiber and control in other.
As far as i know even with POS card you will not be able to form ring with just one fiber.
WHat you can do is if you do not need protection and have only one fiber for connectivity. Take WDM based single fiber solution means Transmit on one wavelength and receive on different so this way you have bidirectional communication without protection. Only thing whether such thing is available or not for the product you are looking at.
"can i use DPT line card as a normal pos interface '
You can use DPT card as POS if it is made like that such as
this card for 7600 is both DPT and POS
http://www.cisco.com/en/US/products/hw/routers/ps368/products_data_sheet09186a0080088774.html
one more which can be used by both DPT and POS
http://www.cisco.com/en/US/prod/collateral/modules/ps6267/product_data_sheet0900aecd803398df.html
But this one cannot be used for both as it is made only for DPT
http://www.cisco.com/en/US/prod/collateral/routers/ps167/product_data_sheet0900aecd8041add8.html

Similar Messages

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • Can I create one single  crystal report using 2 bex queries

    HI all,
    I have 2 bex queries and has to develope a single crystal report .Is it possible???? If so, than how to connect two bex queries  and develope  one single crystal report.Any other option is also fine. I mean ....no need to use crystal..( I can go for one single webi..).But need to know the approach ...
    or else...can I create universe on 1 bex and other universe on other bex ..and go for one single webi report..
    Only problem is client is particular about one single report(either crystal or webi)
    if i go for webi ...I know we can use link universe option but I dont know whether it works fro OLAP environment.
    Please let me know if I can link OLAp universes and go for 1 single webi report.
    Any help is appreciated.
    Thanks in advance,
    Mahathi

    You can use either CR or WebI.
    In CR Designer create the report using the SAP toolbar (Create report from query) based on the 1st BEx query. Then use the Database expert (first entry in the Database menu) to add an additional connection to your 2nd BEx query (+Create new connection->SAP BW DX query). You can then join the results of the 2 different queries in the database expert also.. Please note that if you do NOT want to join the result sets, then it is more efficient to use subreports. Create two different CR reports, each based on one of the BEx queries and then use one of those as your main report and insert the other one into it as subreport. Once embedded you do not have to keep the separate .rpt file of your second report.
    For Webi you must build 2 universes, each based on one of your BEx queries. In your report you can add multiple queries based on different universes. You can join the results sets here by using the Merge dimensions button in the report editor area.
    Regards,
    Stratos
    PS; Keep in mind that joining a large number of rows at report level (either in CR or WebI) can cause performance problems. If this is your requirement, how many rows do you expect to get back from each individual query?

  • I want to play music from my playlist when I am using slideshow of my pictures in Ipad,  but I can only choose ONE SINGLE song, and it continuously repeates itself.  Is there a way to play the complete playlist while showing my pictures?

    I want to play music from my playlist when I am using slideshow of my pictures in Ipad,  but I can only choose ONE SINGLE song, and it continuously repeates itself.  Is there a way to play the complete playlist while showing my pictures?

    You can start the playlist playing in the iPod app and then switch into the Photos app and start your (non-music) slideshow - as you've found out you can currently only select a single track in the Photos app. Whether that will change in iOS 5 I don't know, but you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • HT2589 We have purchase 5 apple minis and would like them all on one account.  That way we can monitor the use of these units.  they will be used strickly for a business application.  can I use one account in itunes or must i have multiple.

    We have purchased 5 apple minis and would like them all on one account, that way we can monitor the use of these units.  They will be used strickly for a business application.  Can I use one account in itunes or must i have multiple.

    Not going to happen the way you want it to.
    When you add a gift card balance to the Apple ID, it's available for the Apple ID.
    Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

  • Can I use one Apple TV unit to distribute content to two TV's?

    Can I use one Apple TV unit to distribute content to two TV's? If so, how?
    I want to be able to purchase movies off of the iTunes store on both TV's and to display photos and listen to music.
    Thank you for looking.

    Apple TV is designed to display content on a single TV only. Although it has component and HDMI outputs they are not independent and, as has been pointed out already, HDMI will take precedence over the component video.
    You will need two Apple TVs, one for each TV, and you can then sync both with one computer either with the same content or with different content selected from a common library in iTunes..
    Hope this helps.

  • We have two IMac computers.  Do I need to purchase two upgrades to Lion or can I use one upgrade on bo†h on my computers?

    I have two IMac computers.  Both running the latest version on Snow Leopard.  To upgrade to Lion, do I need to purchase two upgrades or can I use one purchase for bo†h computers?
    Thanks,
    Alice

    As I understand the as yet unconfirmed rumor by me, is that once you pay for a single copy of Lion, every computer you have that's authorized under your Apple ID can download it, no limit on number.

  • Can i use one interface to load data into 2 different tables

    Hi Folks,
    Can i use one interface to load data into 2 different tables(same schema or different schemas) from one source table with same structure ?
    Please give me advice
    Thanks
    Raj
    Edited by: user11410176 on Oct 21, 2009 9:55 AM

    Hi Lucky,
    Thanks for your reply,
    What iam trying is ...Iam trying to load the data from legacy tables(3) into oracle staging tables.But i need to load the same source data into two staging tables(these staging tables are in two different schemas)
    can i load this source data into two staging tables by using single standard interface(some business logic is there)
    If i can then give me some suggestion how to do that
    Thanks in advance
    Raj

  • HT201250 Can I use one Time Capsule to back up two iMacs?

    Can I use one Time Capsule to back up two iMacs using Time Machine? Both are running Mountain Lion.
    Fouind the answer in other questions. Don't know how to remove this message. Sorry, Des

    Yes, if you use an application like Genie Timeline Pro, which was designed for this type of purpose.  Genie Timeline will make a complete copy of your Dell on the first backup. After that, it will only backup the changes that have occurred since the last backup.
    Genie Timeline Pro | Overview | Time Machine Backup Software for ...

  • How can I use the versionning tool to make a coherent solution to export

    how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
    I want to know proper steps to Import/export objects.
    while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
    while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
    required ur suggestion
    Palash Chatterjee

    kelly-bot wrote:
    Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
    Our posts overlapped there.  Are you saying you could reliably drag one pixel with CS3? 
    What other issues are you having?  Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

  • Can i use one pc with one installation of Itunes to use with multiple apple ID's?

    can i use a single pc with one edition of itunes to manage multiple apple id's (without everyone's mail and message popping up on eachothers ipads/iphones etc)?

    You would need the apps installed on both volumes. The versions installed on your 10.4 drive will most likely give you a "You cannot use this version, etc..." error if you try to launch them from a 10.5 volume. Some apps may run but you will end up "confusing" the system as to which instance of the app you want it to use.

  • HT204053 Can I use one Apple ID to purchase apps and a different one to purchase iTunes music

    Can I use one Apple ID to purchase apps and a different Apple ID to purchase music off iTunes on the same computer?

    Short answer, yes.
    Long answer, it can make things more complicated, especially if you start adding iOS devices to the mix.

  • HT201251 I want to use 30  ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices

    I want to use 30  ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices?

    Alternatively you can always manage your iPads (does not matter how many) with a single apple id and all reporting to your account under "find my device" service. Keeping an eye on all your units. Additionally as you mentioned these are for your Restaurant you may find the solutions offered by this company who creates apps and hardware for this purpose: http://www.spartakioskpro.com
    Additionally if you expand beyond those 30 iPads to say 300 you will want to enable or plan on MDM as your best option to automate every ipad to use the same profile and app and ios configuration while also keeping a close eye on all of them via online MDM services like: https://meraki.cisco.com/products/systems-manager
    Here is a pic

  • SAP ME - Can you use a single MSSQL instance on a single server?

    Hi,
    We need to build a demo system with the minimum of hardware so would like to use just one server.
    The build would be Netweaver 7.4, ME 15 & MII 15 Using SQL 2012 as the database.
    The question is, can I use a single instance of SQL or do I need to install two ? One for netweaver and one for ME ?
    The ME database install guide states the following warning:
    CAUTION
    SAP ME does not use the same collation as the SAP NetWeaver database and server. Do
    not use the SQL4SAP.vbs provided with MSSQL software to install the SQL Server database
    software.
    Does this mean I would install one instance for Netweaver using SQL4SAP.vbs and a second one (using a different port number) for ME using the standard installer ?
    Or can I install just one database engine instance and configure the collation for each database individually ?
    Also what about any of the other settings, eg Filestream and the XA install ?
    Thanks for any guide that you can give.
    Kevin

    Hi Kevin,
    We have this exact scenario on one of our internal sandboxes. Install a single SQLServer 2012 (we installed Enterprise version) instance and create the NW, ME WIP, ME ODS, and ME GODS databases separately, with different collations. We also have XA configured on the server, don't know about Filestream.
    We are running a 2 CPU 8GB VM instance, I would recommend at least 12GB as 8 is minimal.
    Regards, Steve

  • Can we share one single RDBMS security store across multiple domains ?

    Can we share one single RDBMS security store across multiple weblogic domains? The idea is to utilize the same set of users and group defined in Weblogic Security Realms across multiple weblogic domains. Is it possible ? are there any risk ?
    i am using Oracle WebLogicServer11gR1 (10.3.6) Generic with Coherence.

    Hi,
    The document which you are referring is for WLS 10.0 and RDBMS security is introduced from WLS 10.3.0 onwards.
    The reason why RDBMS security store should not be stored between two domains is RDBMS security store is used by authorization, role mapping, credential mapping, and certificate registry providers.
    Once the RDBMS security store is configured in a domain, an instance of any of the preceding security providers that has been created in the security realm automatically uses only the RDBMS security store as a datastore, and not the embedded LDAP server.
    It is just the replacement for Embedded LDAP.
    Thanks & Regards,
    Murali.
    ============

Maybe you are looking for