Can i Use Oracle Report 6i and Report 10g in Same PC ?

Hi,
My Comapany wants to Migrate Oracle 6i Reports to Oracle 10g .My Question is can i use both versions in a Single Machine ? If i can do so what are the Steps i need to follow .I Tried once but its Doesnt seem to work.
Thanks in Advance.
Dev

It will install necessary components at installation time. And when you run the forms, it will install JDK if not already installed.

Similar Messages

Can I use both iPhoto 6 and 5 on the same Mac?

I gave up on iPhoto 6 when it comes to publishing web galleries (see my posts at http://discussions.apple.com/thread.jspa?threadID=456532&tstart=0 )
Can I use both iPhoto 6 and 5 on the same Mac?
Thanks!

Lior:
Welcome to the Apple Discussions. Yes you can but it takes a lot of caution! You can have both application running their own library. But the problem comes in when you launch V5 into the last used library, a V6 library, and it can corrupt that library so it won't open in V6 again. Conversely, if you open V6 and the V5 library was the last to be opened and you don't pay attention, you'll convert it to a V6 and lose the V5 access.
So you have to make sure you ALWAYS launch iPhoto with the Option key depressed and manually select the library to use each time. Also Name each library differently. I use V6 LIbrary and V5 Library. You can rename your current one and then launch iPhoto with the Option key depressed and navigate to it to open it.

Can i use a track pad and mouse at the same time

can i use a track pad and a mouse at the same time

If you mean can you have them both connected at the same time, then it's a yes. I have both connected and use the mouse for some functions and the trackpad for others... works a charm.

Can I use Oracle 11g Developer tools with 10G and XE

Hi, I want to use Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools for Visual Studio with 10g and Xe . Will there be any issues. I want to do so because I am not able to see Oracle Database project in Visual Studio when I install Oracle 10 g developer tools wherein I see that in Oracle 11g developer tools. Please suggest.

No there are no issues. Just be sure to install ODT in a separate location than where XE is installed.

Can you use a roaming network and wireless extender at same time?

Greetings community - I've been struggling with an attempt to extend my wireless network for some time now. Please forgive my ignorance on the topic - I realize how 'simple' this is for many of you. Let me summarize:
What I have functioning:
1. Comcast telephony modem
2. 5th gen Airport Extreme as main wireless router connected to modem via Ethernet (corner of floor 3)
3. 2nd gen Airport Express as wireless extender (hooked to a stereo on floor 2)
What I want to accomplish:
1. I have poor wireless signal on my sun porch (corner of floor 1 opposite side of building as modem)
Extra equipment I have:
1. Another 5th gen Airport Extreme
2. Another 2nd gen Airport Express
What I have tried (and failed at):
1. Initially I set up the second Airport Extreme as a second wireless extender and placed it at a further point away than my first wireless extender. I quickly realized that set up does not function appropriately and one cannot connect to the further extender (I read about that on the apple forums).
2. I tried placing the second Airport Extreme in a different part of the house at equal distance from the main router as the first wireless extender. It's capability to extend was minimal if any.
3. I tried connecting the Airport Extreme to the main router via an Ethernet cable with the hopes of creating a roaming network (which I read about on the apple forums). I would have to come up with a way to run the Ethernet through the house but I'm willing to cross that bridge later. Once I got that set up, the 2nd gen Airport Express which was previously set up as a wireless extender is no longer recognized. Argh!!
Questions/Theories/Suggestions:
1. Is it possible to have a wired extender (via Ethernet) function at the same time as a separate wireless extender all connected to the same router? If so how do I do it?
2. I thought about keeping Airport Extreme #1 wireless connected to Airport Express #1 and call that Network 1. Then plug Airport Extreme #2 directly into the modem to create Network #2 and use Airport Express #2 as wireless extender. When I tried plugging both Airport Extremes into the modem, they both stopped functioning.
3. Do I get a second modem to put somewhere else in the house and use Airport Extreme #2 and Airport Express #2 in that fashion? My guess is Comcast will try to charge me a separate internet access fee to do that (boo!!).
I know there are a lot of brilliant folks out there. I'm sure someone can read this and see the 'obvious errors' in my ideas and attempts. I'm certainly open to new suggestions as well.
Thank you in advance for your time and advice.
- The New Guy

Is is possible to rename the AEx 2 a different network name from the AEx1 and AE 1 (even though they are all connected to each other)? And say it is possible, would that potentially preventing the jumping?
No, in extend wireless the names must be the same..
However since you are creating a network on AE2 which is extended by AEx2 then you can indeed use a different name.. but it must be both,, AE2 and AEx2.
2. Even more crazy - if I did (could) give the AEx 2 a different network name, could I use my AE 2 as a wireless extension to that second network? Or is this just getting out of hand now?
You have lost me now.. there are ways and means.. but let me recommend a better solution.
Use EOP (homeplug in US) adapters if you cannot run ethernet. Multi-storey houses where you have heavy concrete construction are never going to work well with wireless alone. You are much better getting ethernet properly installed (which is the only 100% guaranteed method).. or buy a set of EOP adapters and give them a try.. they work in some cases and not others.. but better than wireless when they do work.
Otherwise I think you need higher power wireless routers.. but I can suggest you do the setup in a more controlled manner.
In other words do not use auto as per the airport utility.. use very short wireless names, different for both bands.. and fixed wireless channels.. then test which band works better.. Then you can do a link.. which will be slow but might give you better performance.
So..
Link1 Main AE1---- AEx1 This is wireless extend.
Link2 AEx1--ethernet--AE2. AE2 is in bridge mode and is also set to create a wireless network. (Use different wireless name here to prevent confusion).
Link3 AE2-----AEx2 Second wireless extend.
This overcomes the Apple limitation on multiple extends. It is not great setup but might get wireless to where you need it.. And better speed than you can get now.
NOTE>. I would personally never do this.. I will run ethernet forevermore.. having tried and tried in various places and using all kinds of equipment.. my conclusion is.. wireless is not suitable.. unless you can get enough signal in from one AP.. everything behind it must be ethernet.
It is much more expensive in some cases.. but ethernet works.. nothing else can be guaranteed to work.

I have on;y one audio port can i use it for input and output at the same time?

i have the new macbook pro 13 in and i want to connect aguitar as input and output on an amp but i have only one audio port

You can't use the jack as an input and output simultaneously. The solution is to look for a USB or Firewire interface to get your guitar sound into the computer.

Can i use ALL usb ports and firewire port at same time??

can you plug in two usb devices and a firewire device, all at the same time??
into macbook or macbook pro....
macbook manual says, one high powered usb device can be plugged in.
but i dont know if they mean into each port, or at one time in total.
i just spoke to apple, and they told me to call support. i havent even bought the laptop yet.
i want to plug in a fast track pro audio interface = usb
a mouse = mouse, akai mpd16 drum pad = usb, and a 7200rpm firewire external hard drive..........so all my ports i wanna be using at the same time.
is this possible? or will macbook and the macbook pro differ in performance regarding this issue?
say if i buy a usb hub and plug in 5 usb devices...........possible?
or is their limitations??
thanks in advance.

dwb wrote:
MacBook - since I was replying to a MacBook question it wouldn't have exactly made sense to refer to my iMac experience, right?
BTW - there are two caveats. First, USB and FW ports can supply power to the devices that are plugged in but there is a limit to how much power they can supply which is why you should always use a powered hub if you are using a hub. If you are using your computer on battery, don't attempt to use an unpowered hub to plug in more devices. Second, if you are on battery, obviously the more unpowered USB/FW devices you have plugged in getting their power from the computer, the faster your battery will be drained.
An unpowered hub shouldn't pull in more than 500 mA. If it's four 100 mA devices plugged into the same hub, it wouldn't use more than a single 500 mA device like maybe a self-powered hard drive. Plugging in stuff like a USB mouse and a flash drive shouldn't consume too much power.
If you're already on battery power then I don't know if it would make much sense to say that one needs a powered hub; where's the power source? I know there are a few (rare) battery-powered USB hubs out there, but I don't know that many people who have them.

Can I Use my Ipod Mini and Nano 2gen on same computer?

I have an Ipod mini and have just purchased an Ipod Nano 2gen. Can I just install the Nano without changing anything that is on my computer for my Mini?
Thanks for any help.
Windows XP

You may need to update iTunes to work with the second generation nano; updating iTunes will not erase anything from your library, and it will continue to work with the iPod mini.
(16216)

Oracle 11gR2 froms and reports And weblogic 11g

Hi,
I am new to Weblogic,we are using Oracle 11gR2 froms and reports and weblogic 11g. How can I deployee my reports in weblogic and where and what is the procedure.
thank you.

Its custom reports or standard ones?
If custom then are you developed as application?

How to use oracle functions in Crystal Reports XI using Oracle Server

Hi all,
Is it possible to use oracle functions in Crystal Reports XI using Oracle Server as Data Source.
If i try to use a procedure,i am getting error with message "Invalid Arguement Provided".
Functions are not visible objects like tables,views and stored procedures.
The jdbs driver i m using is oracle.jdbc.driver.OracleDriver.

I think it is not possible to add functions in crystal directly for any database. You need to use those functions in a stored procedure and add that storedprocedure as a datasource.
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233353335333833323333%7D.do]
regards,
Raghavendra

How can i use Progress bar in IR Report

Hi ,
I have created IR Report based on the View so, it's been taking 10-15 mins of time to execute the IR Report. Here user want to see the Progress bar while executing the IR Report. How can i use Progress bar in IR Report.
Anybody have idea on Progress bar please help me.
Regards
Narender B

Hi ,
Thanks for your information.
I am new to the APEX.*i need to show Progress bar while opening the each page* then user can know some process is happening from the backside and i don't know where i need to add and call the below function.could you please provide the steps for the progress bar.
In my application there are almost 100 pages are there so, i need to show progress bar on each page while opening .could you please provide Global function to call on each page.
function html_url_Progress(pThis){
$x_Show('AjaxLoading');
window.setTimeout('$s("AjaxLoading",$x("AjaxLoading").innerHTML)', 100);
//doSubmit('APPLY_CHANGES');
redirect(pUrl);
Regards
Narender B

Error while install oracle 11G forms and reports -creating Reports Server components error

Hello,
while install oracle 11G forms and report i face below issue on below step ( configuration step)
>> creating Reports Server components error
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.449+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.458+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: /u01/app/oracle/product/fmw11g/asinst_1/tmp
[2014-10-15T09:26:26.459+03:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE

Ram,
You didn't read the response in your other thread.
WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
John

How i can make forms read form nls and reports read from anather

hi evrey one
how i can make forms read form nls_lang and reports read from anather nls_lang ,
I think that this property is found in the file format .ini,
I forgot his name,
Is there one has found this information,
pleez share.
thanks.

At a minimum, the creation of the TcpClient will need to change its parameter to the name of server you want to use:
TcpClient tClient = new TcpClient("gmail-smtp-in.l.google.com", 25);

How/can I use boe search 4 all reports that use specific tables

How/can I use boe search 4 all reports that use specific tables
can this be done with query builder
or
is there a way to search all sql of all reports for specific strings and report names so that I can find all report sql that uses table1 for example?

Hi Bart!
You can use VBScript to extract the dataprovider within the reports (Search for SDK Desktop Intelligence).
If you can wait a few days longer, I can provide my script.
ciao Hakan

Oracle 9i Forms And Reports

I want to download Oracle forms 9i and reports can anyone give me the link for downloading
thanks
caps

http://www.oracle.com/technology/software/products/ids/index.html
Is this what you are looking for?

Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

4195bee8-4db0-4799-a674-18f89aa500cb wrote:
i dont have access to My Oracle Support can u send text or html of document please?
Moderator Action:
No they cannot send you a document that is available only to those with access to MOS.
That would violate the conditions of having such service contract credentials.
Asking someone to violate such privileges is a serious offense and could get that other person's organization banned from all support and all their support contracts cancelled.
Your post is locked.
Your duplicate post that you placed into the Audit Vault forum space has been removed (it had no responses).
This thread which you had placed in the Solaris 10 forum space is moved to the Audit Vault forum space.
That's the proper location for Audit Vault questions.

Can i Use Oracle Report 6i and Report 10g in Same PC ?

Similar Messages

Maybe you are looking for