Can I use OS9 as the start up disk on my Intel Mac?

I have a new Intel iMac. I want to partition my hard drive, install OS9 and run the old system. I know I can't use "classic" on 10.4.7 but I wonder if I could simply install OS9 and reboot my computer. I don't need to move between the two, meaning I don't need to work in OS9 then instantly click and be in 10.4.7. I can deal with the inconvenience of rebooting.
I'm having 3 problems
#1, I have an old version of Photoshop. I'll buy the newest Photoshop someday but the latest version wasn't made for Intel Macs and it is very expensive. $600. I wonder if it runs slow on Intel Macs. Maybe I should wait for the next version.
#2 I have a great Epson printer (875 DC) but Epson has not updated the print drivers for this model and probably won't. OK fine I can buy a newer better photo printer $550.
#3 I have a "Nikon Coolscan 4000" film Scanner $1,300. This scanner is great in OS9 but the thing never worked in OS10 and now that I have this Intel iMac I downloaded the latest software update and the thing still doesn’t work and if the computer sleeps while the Nikon software is open it won't wake up and I have to restart.
To sum everything up, can I run OS9 on my Intel iMac? I don't care if I have to work in OS9 then shut down and restart to work in 10.4.7 Can this Intel iMac understand OS9. If I try to restart using OS9 as the startup disk will I damage the computer? Will I screw things up and have to spend hours and days removing files and correcting problems?
I feel like this computer is a fresh clean new baby and I'm afraid that if I start messing around with it I'll regret it.

Hello,
I have a new Intel iMac. I want to partition my hard
drive, install OS9 and run the old system. I know I
can't use "classic" on 10.4.7 but I wonder if I could
simply install OS9 and reboot my computer.
The problem here, is that the OS 9 environment / Operating System will only run on a PowerPC processor.
The only reason that OS X will run on either processor, is that it was specifically designed to do so from the beginning.
But, OS 9 and older were specifically written for the PowerPC / Motorola processors.
So, you will need a machine with a PowerPC processor to run OS 9.
Currently, there is one program that will enable OS 9 to run on an Intel Mac. But, it requires making a copy of the Power Macintosh ROM. So, it's legal use is questionable at best.
http://www.gibix.net/projects/sheepshaver/
This program works by emulating the PowerPC processor. And, it is reported to operate at roughly 1/8-th of native speeds. So, it could be pretty slow for productive photo work.
#1, I have an old version of Photoshop. I'll buy the
newest Photoshop someday but the latest version
wasn't made for Intel Macs and it is very expensive.
$600. I wonder if it runs slow on Intel Macs. Maybe I
should wait for the next version.
If it is a Mac OS X version, then it will run on the Intel systems. But, yes it will be slower. Usable, but slower.
I haven't tried this program, so I cannot personally comment on it. But, even Steve Jobs admitted it was slow on the Intel Macs.
#2 I have a great Epson printer (875 DC) but Epson
has not updated the print drivers for this model and
probably won't. OK fine I can buy a newer better
photo printer $550.
OS X comes with drivers for the Epson Stylus Photo 875. They are provided by the Gimp-Print layer. But, installed / select just like any other printer. So, as long as you can connect the printer using USB, then you can select the driver for the 875 and be fine (as long as this is the same printer).
Otherwise, some people have reportedly installed PowerPC print drivers without trouble. I haven't tried it myself.
#3 I have a "Nikon Coolscan 4000" film Scanner
$1,300. This scanner is great in OS9 but the thing
never worked in OS10 and now that I have this Intel
iMac I downloaded the latest software update and the
thing still doesn’t work and if the computer sleeps
while the Nikon software is open it won't wake up and
I have to restart.
Can't really help you there.
To sum everything up, can I run OS9 on my Intel iMac?
I don't care if I have to work in OS9 then shut down
and restart to work in 10.4.7 Can this Intel iMac
understand OS9. If I try to restart using OS9 as the
startup disk will I damage the computer? Will I screw
things up and have to spend hours and days removing
files and correcting problems?
As mentioned above, the only method currently available to use OS 9 on an Intel system is that SheepShaver program.
But, I would not expect good results with it for your uses. And, it's legal status would be questionable since you need to copy a ROM file from another Mac to use it (which goes against Apple's license agreement).
I feel like this computer is a fresh clean new baby
and I'm afraid that if I start messing around with it
I'll regret it.
Just make sure you have a good backup of everything before you start experimenting.
I hope this helps.

Similar Messages

Can I use one of the Creative Cloud apps on our other mac at home?

If I'm not using it on my primary Mac (i.e., if I'm doing disk maintenance or my wife is web browsing on it), can I launch one of the CC apps on our other mac? A given app would be launched on only one of the computers at a time.

Generally there may be issues since even "non-concurrent use" still means that the activation system checks for usage of the same license within the same network and whether PS runs on one machine and AI runs on the other would make no difference and still count since it's just one global license for the whole package, but to tell you the truth you won't know until you try.
Mylenium

I have a G5 imac that is using Disk Warrior as the start up disk and can't change back.

I am using a G5 imac (OS 10.4.8 I think the last update is) and I was attempting to use Disk Warrior to recover a lost file. On my other Macs you made Disk Warrior the start up disk to use it, which I did here but I think that was a mistake. Now I can't change back to the regular start up disk.
I tried starting in safe mode but I think I'm getting kernel panic because it goes to a gray screen and tells me to restart.

I don't think Disk Warrior does file recovery. See:
Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

I had to use the start up disk on my 2008 laptop and the Iphotos software is no longer. How can i get it back

I had to use the start up disk on my 2008 laptop and the Iphotos software is no longer. How can i get it back

Hello Mac4541,
It sounds like you may have reinstalled OS X on your 2008 MacBook and iPhoto didn't get installed.
Given the specifications of your unit, iPhoto may be on a separate install DVD.
MacBook (13-inch, Aluminum, Late 2008) - Technical Specifications
(as an example, not quite sure of your model)
What’s in the box
MacBook
Display cleaning cloth
60W MagSafe Power Adapter, AC wall plug, and power cord
Lithium-polymer battery
Install/restore DVDs
Printed and electronic documentation
Installed software
Mac OS X v10.5 Leopard (includes Time Machine, Quick Look, Spaces, Spotlight, Dashboard, Mail, iChat, Safari, Address Book, QuickTime, iCal, DVD Player, Photo Booth, Front Row, Xcode Developer Tools)
iLife ’08 (includes iTunes, iPhoto, iMovie, iDVD, iWeb, GarageBand)
See also:
Mac OS X 10.5.5 and later: Installing optional and bundled software - Apple Support
Disc 2 - "Applications Install DVD": Bootable disc that includes Apple Hardware Test, and lets you install other bundled software such as iLife
Hope that's it.
Nubz

Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk. MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)

Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk.
MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)

Try holding down the trackpad button while starting up the PowerBook. Holding down mouse button during start up ejects the disc in the optical drive, so I'm guessing it would work the same with the button the the trackpad.

Can we use Perform statement in start routine ,Form and endform.

Hi,
Can we use Perform statement in start routine ? Then write the ABAP code between Form and Endform.
Example : Can I use Perform ABC in start routine. Then define ABC at the end of start routine.
      Form ABC,
      ......<ABAP> code .....
      Endform.

Hi,
In BI 7.0 we have start routines defined using Class where you might be able to create your own performs, but in case of BW3.5 Start routines are defined using Form so there I don't think it will allow you to create one more form.
But you can surely try both the approaches.
Reards,
Durgesh.

How can I use some of the image i am working on to paint with? like if I wanted to give someone an extra eye in the forehead, ow could i then paint their own i in the forehead? I know there is a paint tool for that, i just can't find it ... :/

How can I use some of the image i am working on to paint with? like if I wanted to give someone an extra eye in the forehead, ow could i then paint their own i in the forehead? I know there is a paint tool for that, i just can't find it ... :/

It sounds like you are talking about the cloning tool?
Tool looks like this:
Then when selected you can change the size of the brush and using Alt (windows) and Command (Mac) to select your region you want to copy then start to create you cloned image.
Hope this helps?

I have a Macbook Air and the start up disk is full so it won't boot up. How can I get it to boot so I can delete files?

I have a Macbook Air and the start up disk is full so it will not boot up. How can I boot it up so I can delete some files?

You will have to see about booting it from another drive or USB flash drive or another computer. When you are able to then see the following:
Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

Where can I find the Start up disk and how can I delete file from it.

where can I find the Start up disk on theMac Book Air?
How can I delete files from it?

The startup disk is the internal SSD in your MBA. You may delete files by draging the file to Trash (or clicking on them and then execute COMMAND+Delete). Then empty Trash.
Ciao.

I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever?

I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever and keep together music/apps bought in the 2 currencies?
Thx

Barbara Hunt wrote:
Would it be possible for me to download iTunes in Parallels and get the files into that and then onto my iPod?
Yes, you can download iTunes for Windows using Parallels. If planning on making purchases here and/or authorizing already purchased tracks (from your Mac iTunes library), you are permitted to authorize five (5) computers as per iTunes Store terms of use, regardless of computing platform. No need to create a separate new iTunes Store account.
However, judging from what you would like to do, your best bet would be to convert the WMAs to AAC/MP3 in iTunes-Windows (iTunes-Mac cannot import WMA files), and drag the files from the Parallels window to your desktop to add to the iTunes-Mac library. (as the iPod itself is currently linked to your iTunes-Mac library)
Hope this helps,
Steve

How can i use AME for the new OAF page.

Dear all,
I have developed a new OAF page and registered under Employee Self Service.
How can i use AME for the approval process.
Appreciate your ideas?
zamora

I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
Let's look at the workflow and putting an OAF Page as notification.
As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
Hope this gives some idea.

My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?

My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?
We would like to have all our music, photos, etc. on the iPad - is it best to create a new combined Apple ID for the iPad and simply upload our music, photos, etc. via our laptop instead? Does this not then render the iCloud useless to us?

And just in case you were wondering, installing one purchased copy on all the Macs you own is specifically called out as allowed in the Mac OS X Lion license.
If you do not want to download multiple times, just copy the Applications -> Install Lion app to a safe place BEFORE you do the first install. Then copy that copy to any Mac you own where you want to install Lion.

How can I retrieve my password when the retrials email was not recoverable? I also can't use or pass the othere menace of recovery? Not being able to pass or answer the security questions?

How can I retrieve my password when the retrials email was not recoverable either? I also can't use or pass the othere means of recovery? Not being able to pass or answer the security questions?
I created a new ID but never being able to update the iTunes that were purchased/saved using the old id?
I can't also delete.

Hi Kazmania89,
Welcome to the Support Communities!
If you require additional assistance with this, click on the link below for guidance:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Once you are able to gain access to the old Apple ID, this article may be helpful:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device? 
First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
Mac: iTunes for Mac: How to copy purchases between computers
PC: iTunes for Windows: How to copy purchases between computers
Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch.
Cheers,
- Judy

After upgrading to firefox 7, I can't use many of the features on my schools secure website. So, how do I install a previous version of firefox?

After upgrading to firefox 8, I can't use many of the functions on my schools website like opening the textbook and sending emails. I spoke the school's tech. support & they informed me that my version of firefox was not compatible with their system. So, how do I install a previous version of firefox (firefox 6 to be exact)?

You can download Firefox 6.0.2 for Mac OS X 10.5 from ftp://ftp.mozilla.org/pub/firefox/releases/6.0.2/
Backup your '''Profiles''' folder before new installation.
edit: replaced random third-party download site link.

Can I use OS9 as the start up disk on my Intel Mac?

Similar Messages

Maybe you are looking for