Can i use PCI 6115 both as an output and input device simultaneosuly?

I would like to use PCI 6115 data acquisition card from National Instruments for both generating a signal and then configure it for receiving the generated signal. I am using MATLAB program.I ran a program and it shows no error. But the results are not what I expected. Any help will be appreciated

Hello,
The PCI-6115 can receive and generate signals. It can actually do both at the same time. However, this depends on how it is programmed. Since you are using MATLAB, I do not know what I can do to help. Are you making calls to NIDAQ32.dll?
Please post any follow questions or maybe some more information on what you are seeing.
Best regards,
Justin T.

Similar Messages

Can I use one itunes account for multiple users and multiple devices

Can I use one itunes account for multiple users and multiple devices?

The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

Can I use it for both a backup drive and shared network drive?

Is it possible to use the Time Capsule for both an automatic backup drive for my Mac AND use it as a shared network drive to store my large library of home videos? If so, does it require partitioning the drive and are there instructions available? Alternatively, if I store my home videos on its own network drive, will Time Capsule backup this drive too? If I don't want any external drives tethered to my mac, how would set up the 2 drive scenario, so that home video drive can be shared on the network?
To be specific, I'm looking for a networked drive solution that allows me to do the following:
1) automatically back up my Mac
2) act as the primary storage drive for 750GB of the kids home videos (to save room on Mac) [Side question - ]
3) have the ability to watch the home videos on both my family room Apple TV (is this even possible?) and my kitchen Mac Mini display (would my Mac's iMovie's library be able to include my home video content that is stored on a network drive, or does it require the content to be on the Mac hard drive?).
4) If I use a two drive solution (time capsule backup and cheaper second drive), I want to be able to have Time Capsule back up the home video content on the second drive.
5) I do not want any drive tethered to my Mac, only wirelessly connected. Would the second drive be connected to the Time Capsule? How would this be set up?
Many thanks!

christianfromshaker heights wrote:
Is it possible to use the Time Capsule for both an automatic backup drive for my Mac AND use it as a shared network drive to store my large library of home videos?
basically yes, but i wouldn't recommend it.
If so, does it require partitioning the drive and are there instructions available?
the disk in the TC can't be partitioned in the traditional way. but you can use disk utility to create a "fixed-size" sparse disk image on the TC's disk for use with other data. use the instructions here, just leave out the encryption part.
Alternatively, if I store my home videos on its own network drive, will Time Capsule backup this drive too?
no.
time machine can not back up from network drives.
To be specific, I'm looking for a networked drive solution that allows me to do the following:
1) automatically back up my Mac
2) act as the primary storage drive for 750GB of the kids home videos (to save room on Mac) [Side question - ]
consider a NAS that is time machine compatible.
3) have the ability to watch the home videos on both my family room Apple TV (is this even possible?) and my kitchen Mac Mini display (would my Mac's iMovie's library be able to include my home video content that is stored on a network drive, or does it require the content to be on the Mac hard drive?).
it's possible to stream content stored on a TC (or NAS) to TV. using home sharing, your mini would be able to access files in homeshared libraries.
it doesn't matter where the files are stored as long as iTunes knows they are there. in other words, the content needs to be in an iTunes/TV friednly format and in your iTunes library - that doesn't mean the content can't be stored on an external HD, a TC, or a NAS.
4) If I use a two drive solution (time capsule backup and cheaper second drive), I want to be able to have Time Capsule back up the home video content on the second drive.
What can Time Machine back up, and where can it put it’s backups?
5) I do not want any drive tethered to my Mac, only wirelessly connected.
IMO, your best course of action is to get a NAS. if you're interested, i can highly recommend this device by Synology.
Synology NASes play very well with Macs and have excellent backup features on board. given enough space (i have 4x2 TB drives installed) you can store your media files there, use time machine to backup your Macs to it and can use the on-board backup solution to back up the whole shebang to a USB drive connected to the NAS.

No ISA slot available in PC. How can I use PCI-85 Modbus Plus card with Lookout?

My application is to communicate with two Modicon PLCs using Modicon's ModBus Plus (PCI based PCI-85) network card inside my PC, and using Lookout as an SCADA software. Since there is no ISA slot available in new PCs, I can not use Modicon's ISA-85 Modbus Plus networc card. But Lookout does not support PCI based PCI-85 card, how can I use PCI-85 card then, with Lookout? Why doesn't Lookout support it? I asked the following question from from the Modicon's representative about it:
If I purchase Modbus Plus Driver Suite CD (SWMXDS001, 05, or 10 etc),will I be able to use Lookout SCADA software (by the way, it supports standard MB+ prtocol) for my application? If yes, can I use any version of an
y of the ISA, PCI, or PCMCIA based MB+ card?
His answer was:
The Modbus Plus Driver Suite will talk to any version of card, PCMCIA, ISA, and PCI. The question now is will the SCADA package you are
planning on using be able to talk to the Modbus Plus Driver Suite? You must contact National Instruments and ask them if they support Modbus Plus, and if
they used the MB+ system developement kit to develop their product. Or if they wrote their own MB+ drivers, do they work with Modicon hardware?

Hi,
currently Lookout does not support the PCI-85 card. The only card supported for Modbus Plus is SA-85. Please see for further information:
Where can I Find Drivers for Communicating to PLCs, RTUs, and Other Industrial Hardware?
How to configure the SA-85 card for Modbus Plus
Hope this helps
Roland

Can i use PCI-1411 to trigger NI 5112 to capture YUV vdieo wave of DVD sync?

I have a PCI-1411 ,i can use this card to trigger NI5112 to capture a line signal of CVBS output of DVD. And i can see in the graph just a line's wave. But it seems that PCI-1411 cannot trigger the YUV output.The wave display still moves quickly,not just a line signal. Can i use PCI-1411 to trigger NI5112 to capture YUV output sync?

A similar question to this one was answered before by an NI employee with an example program attached. Please search the discussion furoms with keywords "5112" and "imaq" and you will find a discussion on triggering a 5112 with an IMAQ board.

Can I use iPod on both Mac & PC?

Can I use iPod on both Mac & PC?

If your iPod is formatted for Mac it won't run natively on a PC because the Windows OS does not support the HFS Plus file system and therefore will not see the drive. Macs can read Windows drives so you could restore and format the iPod on a PC, this would also mean any future software updates would have to be done on Windows. Strictly speaking using a Windows formatted iPod on a Mac isn't supported however many people use one without any issue. iTunes will allow you to use an iPod formatted for Windows on a Mac; however Apple currently only supports using the iPod shuffle in FAT32 format on Mac. Alternatively there are third party programs that will allow you to use a Mac formatted iPod on Windows, this is one for instance gets good reviews: XPlay 2
You can read another user's experience of using XPlay at this link: iPod on Mac and Windows

If I purchase Acrobat XL pro can I use it on both my Mac AND PC?

If I purchase XL Pro, can I use it on Both my mac AND PC?

One off puchase: no.
Subscription: yes. Up to two computers, for your own personal use, not at the same time.

Can i use pci-7352 to run 4 or 6 axis (motors) if i am not using them same time

can i use pci-7352 to run 4 or 6 axis (motors) if i am not using them same time. This is a stepper motor

This is a duplicate posting. I have answered this question here.
Jochen Klier
National Instruments Germany

Can i use pci-7352 to run 4 or 6 axis (motors)

can i use pci-7352 to run 4 or 6 axis (motors) if i am not using them same time

There is no ready-to-run solution for this. Of course you could switch all motor signals with external relays or with a switch matrix to the two sets of axis-signals that are available on the PCI-7352 but I wouldn't recommend doing this as this would be way more expensive and complicated than purchasing a PCI-7354 or a PCI-7356 that support for 4 and 6 axes respectively.
Best regards,
Jochen Klier
National Instruments Germany

I work on two iMacs. Can I use CS6 on both?

Because of recent hardware problems, I am using two iMacs set up the same way. Can I use CS6 on both?

Yes.
Mylenium

Adobe ExportPDF Annual can i use this on both my computers?

Adobe ExportPDF Annual can i use this on both my computers?

Hi Susan,
ExportPDF is online service and you can use it on as many as computer you want. You just require your Adobe credentials to log in for conversion process.
~PRanav

I wish to purchase creative cloud for students, now i have two computers that i use actively, can i use cloud on both at the same price and download?

I wish to purchase creative cloud for students, now i have two computers that i use actively, can i use cloud on both at the same price and download?

Your subscription allows for you to install on two machines. One condition is that only one of the installations can be in use at any given time.

Can I use TC as both a back up drive and a network drive?

can I use TC as both a back up drive and a network drive?

Yes, but the TC has no auto backup and TM cannot backup a network drive. Any files you put out there.. are like on the end of rickety pier.. in a storm. One day the whole thing will fall into the sea.
Observe the warnings..
http://pondini.org/TM/TCQ3.html

I gave my ipad 2 to my brother last month. After that he erased all content and settings, sign in with his apple id. The next day until now, I found out that I can not udpate my apps both on my iPhone and iPad Air. What should I do? Thank you in advance.

I gave my ipad 2 to my brother last month. After that he erased all content and settings, sign in with his apple id. The next day until now, I found out that I can not udpate my apps both on my iPhone and iPad Air. I had create new apple id, change my password, delete the icloud acc. But still I can not update my apps. I have many of red notifications on iPhone and iPad Air. What should I do? Thank you in advance.

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

Can I use DIO 32HS in pattern I/O and Unstrobed I/O in the same time?

I work with a pci dio 32 HS(programming with labview) and i want to know if it is possible to configure 3 ports in unstrobed output mode (24 static digital lines) and 1 port in pattern I/O mode which can read AND(not "or") write data(using internal clock)in the same VI.moreover in pattern I/O mode am i obliged to use these port combinations (16 bits: (port0,Port1) or (port 2, port 3) , 32 bits: (port 0,1,2,3))and not an other one and can i configure one port in output and input at the same time (for example aquiring and generating data at the falling and rising edge of the internal clock)?? please give me all possibilities of lines, ports and groups direction (input output bidirectionnal) with more de
tails (i'm not sure of what i can do using the 653X user manual). else, I can't observe with my oscilloscope TEK the internal clock signal(squarewaveform TTL) onthe REQ pin as it is said in the user manual, WHY????
Thank you for your answers.bye

Hi,
No, you cannot configure 3 ports together. On the PCI-DIO-32HS, there are two main port groups, each group consisting of two ports: group 1 (ports 0,1) and group 2 (ports 2,3). You can configure two 8-bit ports (0 and 2), two 16-bit ports (0,1 and 2,3) and one 32-bit port (ports 0,1,2,3); you can configure each group independently.
Regards,
RamziH.

Can i use PCI 6115 both as an output and input device simultaneosuly?

Similar Messages

Maybe you are looking for