Can I use property loader in a main sequence to load properties in subsequence?

Hi, I have been trying to use the property loader to load test limits and local variabels into subsequences from the main sequence.
I can export all the properties for my main sequence and all the subsequences contained within by selecing <all sequences> in the export function.
When I try to load the exported file back in using the property loader I get differant errors depending on the format I exported/imported it with.
For text or csv files iget error -17100
"The file format is incorrect near the section 'StationGlobals'. Make sure that you are using start and end markers correctly."
For an xl format I get error -18
"Property loader step failed to import or export properties.
310 property value(s) were found.
43 property value(s) were imported from 920 row(s) of data"
There is no where near 920 rows of data or 320 properties in the exported file.
If i use the property loader to load properties in just main it works fine, is there extra formating I need to do to the file before importing it or is it not possible to load properties into a subsequence from a property loader in main?
Solved!
Go to Solution.

Hi,
I have tried several sequences and building the propertyloader file using the export tool,
Moving the End_Mainsequence to the bottem did not help.
I can load values into a single sequence with no problem it is only when I try to load properties into a sub sequence from the main sequence that I have issues.
Attached is a more simple example of what I am trying to acheive.
Kind regards,
Hugo
Attachments:
Sequence File 2.seq ‏9 KB
Test.csv ‏2 KB

Similar Messages

Can I use my DVD Drive from my pc to load Tiger on my Mac

Can I use my DVD Drive From my pc (compaq R4000)to load Tiger onto my Mac G3 Blue & White?

The short answer is no
long answer is maybe but if you manage to get a DVD drive from a Compaq into a G3 then install Tiger it will be so slow (Tiger on a G3 iMac) it'll bring tears to your eyes.
What are talking about this sloww nonsense! I've been using Tiger since it came out on my Summer 01' 'Snow' iMac 500Mhz and it works quite nicely! Sure garageband is sssllooww but who needs it. Everything elese is good! Just bump up the ram and your good to go as long as the processor is 450Mhz or higher! Although after looking at your post, you were using OS 8.6 so I assume its a 233Mhz. So ya that would be slow...BUT I've found 10.2 Jaguar to work well with my Bondi 233Mhz with 192MB of Ram...

How can I use propertiers in workflow-task like "sap.bc.bmt.wfm.groups"

Hello Friends,
i'm hoping you can help me with this question:
- How can I use the properties in the task definition of a workflow?
- And what can i do with it?
At http://help.sap.com is a very low level documentation.
Best regards,
Christian

Answered myself.
Thanks
Christian

How can i Use the symbols from the main html page?

Hello!
Im trying to find a solution for days!!
i need to use my symbols from the html page, for example to hide the symbol i want to use: sym.$( "sym1" ).hide(); or to make it draggable (with jquery UI) i wanna use: sym.$( "sym1" ).draggable(); but it doesn't work.
i know i can do the same from the edgeActions.js file and here is the working code:
      Symbol.bindElementAction(compId, symbolName, "document", "compositionReady", function(sym, e) {
         var ex1 = sym.$( "farmer" );
         //ex1.html( '<input type="text" />' );
         yepnope({
             both: [
                 "libs/jquery-ui.min.js",
                 "libs/jquery-ui.css",
             callback: function() {
         ( ex1 ).draggable();
but the main problem is that it's always include this file as the very last .js, so in case Im trying to use the symbols from the index.html page (For example: ( ex1 ).draggable(); ) the variables are undefined (because it read the html first)...
Please Help, Im desperate..
Thank you very much!!!
Eran

Hi, Eran-
You will want to use the AdobeEdge.* APIs, which should give you access from external JavaScript into your Edge Animation. The API document has information on that. However, you will need to wait until the runtime loads, so you should use the bootstrapping method that is outlined in Josh Hatwich's post on our blog:
http://blogs.adobe.com/edge/2012/05/15/bootstrapping-edge-compositions/
Hope that helps!
-Elaine

Using jsp:include in showOneTab - main form not loaded on submit

I have a JSP page with JSF and ADF components. It is a large JSP containing some main details and then an af:showOneTab component to create a set of tabs. It works fine with JDK 1.5 and Tomcat 5.0 but when changed to Oracle Application Server 9.0.4 and JDK 1.3 We get the following error:
JspCompileException:.... code too large for try statement catch( Throwable e}....
Finding this to be caused by large size of JSP, we divided the page as follows - a main jsp containing the main form details and 1 jsp for each tab. Whenever one of the tabs is clicked the corresponding JSP is dynamically loaded using jsp:include tag as follows:
<af:showDetailItem text="Tab1" id="tab1" styleClass="menu">
          <f:subview id="viewTab1">
               <jsp:include page="Tab1.jsp" />
          </f:subview>
</af:showDetailItem>
There is a Submit button in the main jsp, when this is clicked the main jsp is reloaded.
But when the user navigates to any of the tabs and then clicks the Submit button in the main form, the main form is not reloaded - only the jsp for the currently selected tab is loaded.
(I am using f:view and h:form in the main form, and no form tag in the included jsps)
How to solve this problem?

The af:selectOneChoice components are in the test.jsp page included in main.jsp with jsp:include tag.
The code look like this:
               <af:selectOneChoice label="#{msg.team}"
id="soc1"
value="#{myBean.selectedTeamID}"
autoSubmit="true">
<f:selectItems id="si1" value="#{myBean.teamList}"/>
</af:selectOneChoice>
<af:selectOneChoice label="#{msg.subteam}"
id="soc2"
value="#{myBean.selectedSubteamID}"
partialTriggers="soc1"
rendered="#{myBean.selectedTeamID!=null}"
autoSubmit="true">
<f:selectItems id="si2" value="#{myBean.subteamList}"/>
</af:selectOneChoice>
the code works fine in the seperate page, but when I include the page the second selectOneChoice component doesnt get rendered.
Edited by: Migan on 2010-jul-13 08:36

Can I use the superdrive on my older iMac to load software onto my brand new iMac?

I have a new 21.5" iMac on order, an upgrade from my late 2008 iMac, which I'm keeping. I was told by the Mac rep that I can use my older iMac's superdrive as opposed to having to purchase a separate optical drive. Is this true? If so, how does that work exactly? I very seldom need a superdrive, and only need it to install software on my new one.
Thanks in advance for your help!

Make sure both Macs are on the same network and in System Preferences on the Mac with the Superdrive go to System Preferences>Sharing and tick DVD or CD Sharing. Once the disk is inserted it should appear on the Mac without the DVD/CD drive.
For more detail in Finder look at the Help menu 'DVD or CD Sharing'.

Can I use 4k footage in a 1080p sequence, then export 4k without resolution loss?

Hi,
I cut a 1080p sequence using 4k footage that I scaled down in the Effect Controls window. If I export that sequence as a 4k file, will Premiere compress that original 4k footage to 1080p, then expand it back to 4k in the exported file (please say no)? Or is Premiere intelligent enough to interpret the export scaling using the size of original footage, rather than the sequence size? (Hope that makes sense)
Of course it's wise to create a sequence based on your delivery requirements, but sometimes clients change their mind and I don't feel like rescaling every damn clip. But thanks for the advice
Thanks!
David

Premiere will export to the settings of the timeline / sequence you've created. It doesn't matter what formats you've used withing that timeline. So if you use 4k in a 2k sequence, Premiere sees it as a 2k sequence and, without user intervention, will export at that format.
Obviously you can up-scale during export but i) why would you want to do that when you've previously down-scaled and ii) anything above 100% magnification will begin to pixelate.

Can't use MS keyboard to change startup sequence

I'm using a MS Ergonomic Natural Keyboard 4000 with my Mac Pro (10.6.1); I can't select alternate sequences during the startup (Option to choose the startup device, or Cmd-Shift-Option-Delete to automatically select a FW external drive).
One place told me that third-party devices weren't recognized early enough in the startup sequence to change the startup drive, this is sort of what MS also told me, they said I needed to make sure the USB keyboard option (or something similarly named) was activated in the BIOS…(do Macs even have BIOS?)
Anyway if someone knows of a workaround (other than changing the startup drive in the System Preferences) that would be great.

That ability is reserved for Macs that don't already have a built-in optical drive.
I bet you probably looked at some of the guides online telling you to edit a plist file that supposedly unlocks the ability to create a bootable USB drive on a Mac that has a SuperDrive. But that's all it does. It doesn't change anything else about the process of Boot Camp Assistant creating the partition and requiring installation be done with the SuperDrive. All that modification does is literally "un-gray" a checkbox.
Is it annoying that the SuperDrive must be used? No doubt, especially since this restriction was in not in place for older Macs. This is something that Apple would have to address via an SMC or other update, but the odds of that happening are less than those of you winning the Power Ball. It's a restriction you'll have to live with, unless you want to "upgrade" to a Retina display model.

How can i execute Spaces API in java main class?

Hi
I am able to execute Spaces API through portal application. However if i try to execute it in java main class, its throwing an exception
"SEVERE: java.io.FileNotFoundException: .\config\jps-config.xml (The system cannot find the path specified)"
oracle.wsm.common.sdk.WSMException: WSM-00145 : Keystore location or path can not be null or empty; it must be configured through JPS configuration or policy configuration override.
How can i set this path, so that i can execute Spaces API from java main class.
Need this main class to configure in cron job, to schedule a task.
Regards
Raj

Hi Daniel
Currently i have implemented create functionality in my portal application using Spaces API, which is working fine. Now the requirement is, i need to implement a "Cron Job" to schedule a task, which will execute to create space(for example once in a week). Cron job will execute only the main method. So I have created java main class, in which I have used Spaces API to perform create space operation. Then it was giving exception.
Later I understood the reason, as I am executing the Space API with a simple JSE client, its failing since a simple java program has no idea of default-keystore.jks, jps-config.xml, Security Policy. Hence i have included those details in main class. Now I am getting new error,
SEVERE: WSM-06303 The method "registerListener" was not called with required permission "oracle.wsm.policyaccess"
For your reference i have attached the code below, please help. How can i use Spaces API in java main method(i mean public static void main(String[] args) by giving all required information.
    public static void main(String[] args) throws InstantiationException,
                                                  GroupSpaceWSException,
                                                  SpacesException {
        Class2 class2 = new Class2();
        GroupSpaceWSContext context = new GroupSpaceWSContext();
        FactoryFinder.init(null);
        context.setEndPoint("http://10.161.226.30/webcenter/SpacesWebService");
        context.setSamlIssuerName("www.oracle.com");
        context.setRecipientKeyAlias("orakey");
        Properties systemProps = System.getProperties();
        systemProps.put("java.security.policy","oracle/wss11_saml_or_username_token_with_message_protection_client_policy");
        systemProps.put("javax.net.ssl.trustStore","C:\\Oracle\\Middleware11.1.7\\wlserver_10.3\\server\\lib\\cacerts.jks");
systemProps.put("oracle.security.jps.config","C:\\Oracle\\Middleware11.1.7\\user_projects\\domains\\workspace\\system11.1.1.7.40.64.93\\DefaultDomain\\config\\fmwconfig\\jps-config.xml");
        systemProps.put("javax.net.ssl.keyStore",C:\\Oracle\\Middleware11.1.7\\user_projects\\domains\\workspace\\system11.1.1.7.40.64.93\\DefaultDomain\\config\\fmwconfig\\consumer.jks");
        systemProps.put("javax.net.ssl.keyStorePassword", "Test12");
        System.setProperties(systemProps);
        GroupSpaceWSClient groupSpaceWSClient;
        try {
            groupSpaceWSClient = new GroupSpaceWSClient(context);
            System.out.println("URL: " +
                               groupSpaceWSClient.getWebCenterSpacesURL());
            //delete the Space
            List<String> groupSpaces = groupSpaceWSClient.getGroupSpaces(null);
            System.out.println("GroupSpaces:: " + groupSpaces.size());
        } catch (Exception e) {
Regards
Raj

How to use the region parameter of main report for subreport chart titles?

I am using Crystal Reports 11.
I create 1 main report with 10 sub-reports that contain cross-tabs & charts. The main report has a parameter regarding 3 different areas: region1, region2, and region3.
I use the method of adding the u2018regionu2019 parameter of main report to the selection formula of the sub-reports. So, I can select 'region' from main report to controll outputs in sub-reports by region.
I use formulas for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
Since I pass the u2018regionu2019 parameter of main report to sub-reports, I have to change chart titles dynamically based on the region I select.
How can I use the region parameter from main report in the formulas to get chart titles dynamically?
Thank you in advance.

Thank you.
I am not using Chart Title with "Chart Expert".
I am using a formula for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
I drag this formula above the charts and it looks like a dynamic title. So, for product a111, the chart title would be "Region1 u2013 a111 Counts"; for product b222, the chart title would be "Region1 u2013 b222" Counts; and so on ...
Because I pass the region parameter from master report to subreport, I want to change the region part of the chart titles dynamically.
For example,
when select Region1, the chart titles should be: "Region1 u2013 a111 Counts"; "Region1 u2013 b222"; ...
when select Region2, the chart titles should be: "Region2 u2013 a111 Counts"; "Region2 u2013 b222"; ...
I want to add the region parameter into the tiltle formula.
How should I do?

Is it possible to enter a serial number in the main sequence, instead of in the "Pre UUT"?

Hello!
Is it possible to enter a serial number in the main sequence, instead of in the "Pre UUT"?
I still want the serial number in the Report.
I also want the serial number as file name of the report.

You can enter the serial number in the main sequence instead ot the "Pre UUT" but there is no reason to do that.
if you still like to input serial number in your sequence You will need to make sure that you update the variable in the process model which stores the serial number ie. RunState.Caller.Locals.UUT.SerialNumber
This is used to generate the report.
the report can also contain the serial number of the uut if you select "New file for Each UUT" under Configure-Report options and in the "Report File name path"
The format of the name of the report will be
[123].txt
"123" was the serial number which I entered.
If you are not happy about the name of the file you can replace Locals.ReportFilePath to contain the right name using a statement step in the process mode
l. If you using the default process model please make sure that you add the statement step after "Determine Report File Path" step in the Process Model.

Access the property of main class in loaded swf.

Hi
i have one main.fla, its document class is main.as. the code in main.as is
package
import flash.display.MovieClip;
public class Main extends MovieClip
private var loading:Loading;
public var trovami:Number=10;
public function Main()
stage.frameRate=31;
loadSWF();
private function loadSWF():void
loading=new Loading(this);
Loadind.as is another class where i load another swf its name is my_swf.
the code of loading class is:
package
import flash.display.MovieClip;
import flash.display.SimpleButton;
import flash.text.TextField;
import flash.display.Loader;
import flash.events.*;
import flash.net.URLRequest;
public class Loading extends MovieClip
private var _fla:MovieClip;
private var url:String;
public var val:String;
private var loader:Loader;
public function Loading(fla:MovieClip)
_fla=fla;
init();
private function init():void
url='my_swf.swf';
var request:URLRequest=new URLRequest(url);
loader=new Loader();
initListeners(loader.contentLoaderInfo);
loader.load(request);
private function initListeners(dispatcher:IEventDispatcher):void
dispatcher.addEventListener(Event.COMPLETE,completato);
private function completato(event:Event):void
_fla.addChild(loader);
loader.y=10;
val="hello"
and the document class of loaded swf is Main2. in my_swf.fla there is one text its name is:
a_txt.
so i have to use property of Loading class in Main2 for text.
code of Main.as is
package
import flash.display.MovieClip;
import flash.text.*;
public class Main2 extends MovieClip
public function Main2()
a_txt.text=val;
where val is the property of Loading class.
so how can i access.

You have a reference to your loaded movie within your Loading class - instead of just setting val to a string - add a method in your Main2 class - and call that from Loading - passing the string to it. Push not pull...
Main 2 becomes:
public function Main2() {
     //a_txt.text=val;
public function setText(val:String):void {
    a_txt.text = val;
And then in your Loading class - when you're done loading just call setText:
private function completato(e:Event):void
    addChild(loader);
    loader.y=10;
    MovieClip(loader.content).setText("hello");
    //val="hello";

Can I use the 'Export Signal Property Node' on a quadrature encoder?

Hi,
So I don't know which counter board I'd be using yet for this (it's used in conjunction with a PCI-6280--the PCI-6280's counter inputs are all taken and so I need another board), but assuming this is possible at all in DAQmx I wouldn't mind knowing whether, say, the PCI-6601 (or any other timer board for that matter) could do this. I'm programming this in LabVIEW 2010 by the way.
I want to have a counter which counts the number of pulses on one channel (I'll call this the 'clock' channel) between when another channel goes from low to high (which I'll call the trigger). It's basically a pulse width measurement, but I only care if there are more than n clock pulses between triggers. I need to have a hardware-timed digital signal which goes from low to high if there are ever more than n pulses between trigger changing state from low to high.
What I am planning to do is this:
Wire 'trigger' to the z-input of the quadrature encoder, and set the z-input value to some arbitrary large value such that, at the quadrature encoder counter task's settings, the counter reaches terminal count in n pulses.
Configure the quadrature encoder counter using DAQmx Export Signal Property Node (tutorial I was looking at is here: http://zone.ni.com/devzone/cda/tut/p/id/5387 ) to toggle a digital channel ('counter event output') from low to high if the counter reaches terminal count (ie, if the encoder reads n pulses).
If the encoder ever reads n pulses on 'clock' between two rising pulses on 'trigger', it sets counter event output high.
Is this possible? Reading through the manual of M series PCI-62xx devices, the index pulse loads the counter with a particular value so it seems like you could conceivably set the counter to the terminal count if you wanted. My only real problem is whether DAQmx Export Signal Property Node works on all counter tasks or just on edge counting tasks.
Thanks in advance for your help. If this isn't possible, I can reply with more details on the problem this is supposed to solve so that you can help me figure out an alternate method.
Solved!
Go to Solution.

There is probably a way to do it, but it it may be easier to use an X-series board for the job. They support a new counter capability for count reset on a digital edge without needing to be configured in encoder position mode. I am not sure exactly how that feature's been implemented however, so maybe it won't make things easier after all.
The plan based on the hoped-for behavior:
1. Configure an X-series counter for pulse generation based on "ticks" of your clock channel.
2. Set both initial delay and low time to the critical # of ticks.
3. Configure for count reset on a digital edge (if possible in pulse generation mode)
4. Configure the count reset value to be the critical # (or possibly 1 less, if possible in pulse generation mode)
5. If you want the output to remain high indefinitely, configure the counter task to use its own output as a
pause trigger, and pause while high.
The way pulse generation works is to preload a # of "low time" ticks into the count register. Then every source edge will decrement the count. When the count reaches terminal count (0), the counter's output is toggled (or can be configured to pulse). The register is then loaded with the # of "high time" ticks and the process continues.
You would be perpetually interrupting the count-down process as long as you got your triggers in time. The count would keep getting reset to the # of low counts, keep decrementing toward 0 without reaching it, and so on. If ever you did reach 0, the output state would toggle high, then the high state would prevent subsequent clock signals from decrementing the count.
You can conceivably do a similar thing with a 6601, but I'm pretty sure you'd need 2 counters working together to get it working.
-Kevin P

Remote location, 7kbs d'load speed, 10 days to d'load Lion, only software updates are through the App Store. Why can't we d'load and install outside the Cloud anymore? Some of us can't use the cloud.

Remote location, 7kbs d'load speed, 10 days to d'load Lion, only software updates are through the App Store. Why can't we d'load and install outside the Cloud anymore? Some of us can't use the cloud and never will be able to.

That is true - I apologize for not being specific - what I was mainly referring to is iLife applications. I have a notice on the App Store that says 3 apps need updates, I look at the apps and they are huge so since my connection is so slow I use my work connection and d'load the files from support to my Windows machine and carry them home, once d'loaded my MacAir states it cannot install, the update must come from the App Store.
I do the same thing for large Leopard and Lion files and I can install them without error, it is just the App Store files that the system stops.

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

First, you cannot do this if you have a Boot Camp partition.
Second: Create a new partition.
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Third: Install Snow Leopard.
Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.

Can I use property loader in a main sequence to load properties in subsequence?

Similar Messages

Maybe you are looking for