Can I use QoS exam in ccnp voice?
Hi all,
I have a doubt. I made a ccip exam and will expire in 2015, even retired. When I made the QoS exam, i be enroled in ccnp voice.
Now I have cvoice, cipt1 and cipt2. If I take the tshoot voice exam, I will become ccnp voice certified? Or I have the CAPPs on my may yet?
Regards.
If I remember right the QoS-Exam was Part of the CCVP. But that retired on February 2011. Sometimes there is a "migration"-phase for old exams, but typically only for a short time-period. So it seems that you have to go for the TVOICE and CAPPS to certify as a CCNP Voice.
You find the requirements here:
http://www.cisco.com/web/learning/certifications/professional/ccnp_voice/index.html#~Exam
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
Similar Messages
-
Can I use Mac Dictate to convert voice memos to text?
Can I use Mac Dictate to convert voice memos to text?
If by "Mac Dictate", you mean the built in speech-to-text feature, no, you can't use that to convert a voice memo, at least not easily. Speech-to-text is designed to work on live speech, not recordings. But, there's no harm in trying.
-
The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking. How do I make the voice stop and my IPAD work again.
If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither -
Can i use english interface but calling voice command in different language?
I try to use voice control in Chinese, but i am using english interface. I try several times but still fail. Any suggestion? Should i change it back to chinese interface?
looked in settings->general->International
there are settings for
language
voice control -
Can I use Droid X in Japan/Taiwan?
I am travelling to Japan and Taiwan for a business trip in a week and will be there for two weeks. I had used the Verizon Global website to do the "Trip Planner" and entered all of the applicalbe info for my trip and my Droid X phone. The planner then indicates my phone will not work while there and I should consider securing a "global phone". I had understood as well that the Droid X can't be used internationally. I called the Verizon global service center to find out information on possibly using the "loaner" program and the individual I talked to said my phone would work in Japan and Taiwan as long as I activated the "roaming" function and also purchase a International Data Plan. this was a surprise to me and I asked several time if she was sure it would work and she said yes. I want to confirm as I don't want to arrive and not have the ability to use the phone.
I have a Droid X as Well and i would have to say with out it having a Sim card as for the Data part of it i would say No) Maybe Wi-Fi But Wildman has a Droid X and he might Know if it can be used there as for the Voice Part of it.
Wildman can you Chime in on this as i'm Not for Sure Thanks b33 -
Can I use, and how can I use voice control with my iPad 2?
Is it possible to use the voice control with my iPad 2? If so, how can I use it? Since there is no siri for iPad yet, I'd like to use something similar to it and I've seen this built in voice control before but I was not sure if it's possible with the iPad.
Not yet, however you can download the new google app. This offers voice seeking on the net.
-
How can I use my iPod Touch as a voice recorder?
How can I use my iPod Touch as a voice recorder for long recordings, like 45 minutes? Is ther an app for that?
I believe I have a Gen 4, but there are no identifying marks on or in it.
ThanksUse the built-in Voice Memos App. That si covered i the Manual
manuals.info.apple.com/MANUALS/1000/MA1657/en_US/ipod_touch_ios6.1_user_guide.pd f -
Can you use an external antenna with the 4G LTE Router with Voice?
I live in a black hole of cell service - very rural, in a valley surrounded by trees, no DSL, no cable, no other options except satellite internet which I did for 15 years and will never do again. My current data setup is a Pantech UML290 USB modem connected to a Cellphone-Mate full band outdoor Omni 3G/4G antenna on the roof. I just ordered an amplifier to boost the 4G LTE connection. The modem is plugged into a Cradlepoint MBR900 router, which then provides my home internet (way more than 10 devices, and mostly wired).
Is there a way to add the antenna and amplifier setup to the broadband router with voice so I can be assured of the signal? If so, could I then use this router to feed the Cradlepoint and continue using multiple wired devices?
I was set to order this router last night, but the CSR through chat told me that you cannot attach antenna to the router with voice - only to the one with data. This really doesn't make any sense to me, but she was firm about it. If I can attach, can I use the cables I have or will I need a different adapter?
There is so little information about this particular router. My current setup is doing fairly well, but I would love the option to drop my landline and increase signal strength for both voice and data. With no antenna, the modem gets around -125 db, and can't connect at all. With the antenna mounted on the roof, and routed through the Cradlepoint, I consistently get -85 db. 4G LTE speeds are around 15-19 Mb/s down and very inconsistent 2.5-4.0 Mb/s up. However, the 4G drops and resets multiple times a day, so I usually sacrifice the speed to get a more stable 4.5-5 Mb/s down and 0.5 Mb/s up through forced 3G.
Voice calls are spotty if received at all, and frequently drop immediately if there is any connection. And of course, the data limit has been a nightmare. I could potentially save some money by porting my landline to Verizon, but not if there is no way to boost the signals. The Omni antenna will boost all, but not sure if there's any way to route the existing antenna setup to feed both the voice and data sides, or if it would be enough to allow me to do this. This router also says it's 4G LTE only, but the specs on the antenna they sell say it boosts 3G for failover, so not sure if it will grab anything else. Any help or advice GREATLY appreciated! Thanks for reading through the whole thing.No, not directly. You would need to transfer your data from your iPad to your Mac and then back it up to an external drive.
Pete -
Can I use short commands in CCNA exam
Can I use short commands in CCNA exam
for example
“conf t” instead of “configure terminal”Sim questions are always answered by configuring
something!
The Exam Engine grades the running config, not the
startup config
Before exam day …
Practice as much as you can (real gear, simulators, sample
tests, read every configuration in books, repeat labs while in
class, etc.)
Use multiple sources for practice/review of configurations
Exam day …
Do what you can—partial credit!!!
Start with “show running-config”
There are no style points!
You can use the short version of commands on the exam. -
Can't use voice in Yahoo chatrooms. w/ x-fi n vista rc1 wiht USB mic
I am now using my USB, but still no sound in YM, anyone know why?
I know think this is affected by creative soundcard, but why?izsony wrote:
I have 32 bit windows vista RC n x-fi xtrememusic
I am actually using the beta 2 drivers.
I can record sound in my computer and listening to 2 speakers, but I can't use voice in yahoo chatrooms.
can anyone tell me why?
I'm not able to get the microphone input to work on my XFI card as has been reported by other people on this forum. Looks like recording may work only under Vista apps directly from your note but not with any 3d party applications such as Yahoo & Team Speak.
In my case - similar to the fact that 5. works under Vista's built in audio control panel but so far none of the 3d party (games/MP3/video) will stream back audio in anything other than 2..
-Kat -
Can i use the ipad2 3 G to make voice calls ?
can i use the ipad2 3 G to make voice calls ?
The iPhone version of Skype will work on an iPad and allows you to use 3G.
Skype's new iPhone application introduces 3G calling functionality ...
S. -
i need some one to help me for downloading photoshop on my mac and i am already paying monthly for it but i can not use it and i really need help because i need photoshop for my art exam which is on wednesday
What is the problem your having downloading the creative cloud desktop application then using it to download and install Photoshop. You can try the direct download if you want to bypass the creative clod desktop application install. Still it mad be installed if you use the direct installer. Pleas read the download instruction and follow them else you will be denied access. Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
-
In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
And please help me can type Laos font in it like andrio phone.Hi Cozumel,
Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
can i use internet in my ipad 3g ios 5.1 through my iphone sim also possible to make voice calls
and i can't fine any access pint name changing option in ipad plz help meYou might be able to use your iPhone sim. FaceTime calls are only possible over wifi or you can get something like the Skype For iPad app from the store if you want to make video calls over 3G - but you can't do 'normal' phone calls with the iPad.
-
After upgrade to ios5.0.1 i can't use voice calls
After upgrade to ios5.0.1 i can't use voice calls - people simply do not hear me. Microphone seems to echo sound back instead of sending it over. Ideas?
Try "resetting" the device...
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
Maybe you are looking for
-
ITunes changing the ID3 tags and deleting music after syncing or opening
After syncing (or opening iTunes), iTunes changes the tags in about 25% of my music (this time it was about 90% affected). It removes the total track number on some of the songs. This has been a consistent problem. I noticed that it also actually era
-
How do I add the capture date and time to the bottom corner of a photo?
How do I add the capture date and time to the bottom corner of a photo?
-
Hello I have a table with the folowing information RowID Asset Version TYPE 1A 345 1 PPS B2 345 2 pps A3 345 3 pps F4 321 1 ppp G5 321 2 ppp H6 333 1 pps I need a Query to get the most updated version of the asset The final result afther the query sh
-
My ipad mini is only 3 weeks old and I am unable to charge beyond 88%, why not and how can I charge up to 100%?
-
Photoshop CS6 file saved thumbnail makes file blank??
Hello, I've recenlty seen this problem, the file i process in adobe photoshop CS6 comes blank and the previous thumbnail also disappear. I've checked the settings in finder and adobe photoshop cs6 but i didn't change anything there. Can any