Can I use RAID0 on Satego X200-21L?
Hello everybody
I have a question. Can I create a RAID0 on my Satego X200-21L and if yes how?
Thank you in advance.
Hi regsetup,
> i have a driver for my laptop called "Intel Matrix Storage Management "
This driver is available for all notebooks with Intel chipset and SATA interface. It has nothing to do with RAID functionality, you need this driver to install Windows in AHCI mode.
In BIOS you can choose between AHCI and Compatibility HDD access mode. Latter mode is a little bit slower but dont require an additional driver. For AHCI mode you need the Storage Manager.
This article describes how to use this driver:
http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm
Similar Messages
-
Satego X200-21L - Black screen and 3 beeps on start up
Hello
I have a problem when I turn on my computer (Satego X200-21L). I got a blank screen and 3 beeps no BIOS boot up no nothing what shall I do?
Anybody everybody please help!Hi
Sounds like a hardware malfunction on your notebook because normally such beep codes mean that its something wrong with the hardware.
Have you installed extra RAM? If yes remove it and try to boot with original RAM only. Furthermore try resetting the RAM in slot.
Does it work?
In worst case you have to go to an authorized service provider. The technicians can check the notebook and determine what is causing this problem. -
Satego X200 - No Sound when HDMI connection is used
Hi,
I got my Satego X200 a year ago and since yesterday I am trying to use the HDMI interface to connect it to a LCD TV. I get a brilliant picture but no sound at all. Is there anything I am not taking into consideration? I've googled everything that I could think of but appropriat answers found.
I would appreciate any help.
Thanks in advanceSo I am back again with the solution that helped so I hope it will help other users. I did an update on BIOS, Graphic Card and HD Audio. The only thing that really helped was the driver / software update I did on Sound by updating drivers and s/w having downloaded them directly from the Realtek Site. SO I hope this hepls anybody else in the same situation.
-
Re: Satellite X200-22E - Can I use Vista 64bit BIOS for Windows 7?
Hello!
Can I use the Vista-64 bit BIOS-Update 2.50 for my Satellite X200-22E? I just installed Windows 7 HOME PREMIUM 64 bit and it works fine.
Before this I had XP-32 bit running.
Thank you in advance!
TomI have a X200-20S and am running Windows 7 64bit with BIOS Ver 2.5 for 32bit Vista. If I try to install ver 2.5 for 64bit Vista I get an error message which tells me the ROM image is identical to the one already installed!!! I can only assume that the installer software can't distinguish beteen the 32 and 64bit versions? Not sure what the difference is but I haven't had any problems with Windows 7 so far apart from the subwoofer not working.
-
Can I use Toshiba Camileo x200 with AC power supply?
Hello everyone,
I'd like to buy the Toshiba Camileo x200 camcorder, but I have a big issue : its autonomy.
According to my research it can record only 100 min while a 32Gb SD card allows more than 5 hours.
So my question is simple : if i want to use this camcorder in a single place, can I use the AC adapter when i use the camcorder?
Thank you for your help!
Jackal
PS : please excuse my english, i'm french ;)It is OK. I didnt want to spend a lot of money so I bought H30. I have it almost 2 years now. It is perfect for recording outside but movie quality recording inside is not so good.
To be honest Im thinking about new cam but you know, for good cam we must pay a good price. -
Satego X200 temerature problem
Hi, please excuse my english i will give my best :)
My Satego X200 Notebook has a temperature problem. At benchmarking or gaming the max. temp. of the CPU is 100C!
I tryed to find the problem so i searched in the internet and found people who took a bios-update. But it do not work at my notebook. But while the notebook updated, i heard the Fans running much faster as normally. So i think it is a Software-problem. I think the Fans are runing to slow.
Have anyone a tip for me? I have no idea how i can speed-up my fans :(
thx for help
defaultHi
Its not software problem buddy
Fact is that the internal temp will always increase to a higher level while gaming or running some high performance applications.
But 100C are definitely too high!
I dont know how old your notebook is and how long are you using this unit but in most cases the internal temperature increases due to the dust and debris inside the cooling ventilators.
In such case its recommended to remove the dust. I clean my fans from time to time using an compressed air spray. Such sprays are very useful and you could remove the dust from the cooling grilles very easily
You can buy such spray from different computer/notebook dealers or check some offers online.
Cheers -
Satego X200-21D - Which RAM for upgrade?
Hello,
I have a Satego X200-21D, Modell Nr. : PSPBEE-007001GR and I want to upgrade my memory from 2*1 GB to 2*2GB. Can I use DDR2 memory with support for DDR2 PC2-6400 or DDR2 PC2-5300 speed?
Thanks
wolfgangHi
I have checked the specifications of Satego X200-21D and it seems that you only need DDR PC2-5300 at least but you can also buy PC2-6400 modules because they are downgrade compatible. That means they would run with PC2-5300 speed but thats no problem.
Make only sure that you buy high quality modules, e. g. Kingston. Alternative you can order RAM modules from an authorized service provider, the part number for 2GB is PA3513U-1M2G -
HT4664 Can I use final cut pro X on " Mac mini" ?
Can I use final cut pro X on " Mac mini" ?
depending on what model: for sure yes, it does!
I did use FCPX on an old MacMini, c2d, 2.26GHz with 8GB Ram (using proxies made editing easy).
My actual work-horse is a MacMini i5, late 2012, 16GB Ram, plus some ext. usb3 drives = perfect for my needs! (costs vs. power)
I'm using two cheap 2.5" Toshiba 1TB usb3-drives, combined with MacOS' built-in DiskUtility as a Raid0 = 150mbps for under 100€ ... not professional (=raid0 contains a small risk of data loss), but again: best €-vs.-HP ratio -
Satego X200-21D: TS-L632D DVD-Drive doesn't read and burn DVD-R DL
Hallo,
I have problems with my SATEGO X200-21D DVD-Drive
TS-L632D to read an burn DVD-R DL discs.
I contacted the Toshiba-support via e-mail ans asked
for a new drive-firmware, but the answer did not solve my problem.
There are only updates in the toshiba download area,
but not for my drive model. I can send my notebook
for money to a service partner, to check this problem.
I can not understand this! I bought a highend notebook
for 1.700 EUR and it is no firmware update support
available to solve problems with newer discs?
If i search for this problem in the WEB, there an a lot of
questions and problems with reading and burning
DVD-R DL discs with this drive modell!
How can it be???
I hope for some hints to get a firmware drive update
to fix the problems reading and writing DVD-R DL discs.
Gettings J. Janni from GermanyHi,
yes I have got the TS-L632D drive and not the TS-L632H - that is true. But why is no firmware update available for TS-L632D,
because also this drive has problems with DVD-DL discs!? I payed 1700,- EUR for my Thoshiba notebook with the
DVD-drive TS-L632D. And in my opinion it can't be, that for this drive version is no firmware update available!!!
Other companys (f. i. DELL , SAMSUNG) support this drive version and offer firmware updates for this drive modell.
It is a fact that my DVD-drive has problems to read and burn DVD-DL discs! This is a known fact for many drives and therfore
exists firmware updates for the DVD-drives to fix this problem. But why not for my drive modell???
My be it was an error to by a Toshiba Notebook!? I am a customer and I don't care what special
DVD-drive modell is in my notebook (TS-L632D , H or wwhat ever)!!!
My message to Thoshiba: "Pleas help me to solve my problem!!!"
Greetings
Janni from Germany -
Satego X200-21D - Specifications of PCMCIA slot
Hi all,
can someone told me the specific for the PCMCIA Slot? In special I wanna know how much Volt the slot has.
3.3 V or 5 V or can the slot both of them?
Kind regards,,
AdrianHi twister666,
The Satego X200-21D doesnt have PCMICA slot, it has Express Card slot. This slot allows you to insert an Express Card. An Express Card module is a small, modular add-in card technology based on PCI Express and USB. The max. transmission rate at 2.5 Gbps. Both 34mm type and 54 type are supported.
But about voltage I can find no information but I think thats not important because there is a standard voltage for this specification that every card will work. -
Hi,
i want to updgrade my Satego X200 notebook (running with Windows Vista Prem.) to Windows 7 Prem.
What are the recommends from Toshiba? Are the Vista drivers running with Windows 7 or after the
Upgrade procedure?
Regards JanniHey, i have the satego 200x 21L and it works with windows 7 professional. But i have problems with the toshiba flash cards and the the fringerprintsoftware. I downloaded another software from upek, but now i dont have the full version. I wrote to toshiba and i am waiting for the reply. Andybody has the same problems?
I downloaded drivers for sound and display and it finally works. But toshiba doesnt have a good support for windows 7 and the satego series.
Message was edited by: sigmazero -
My Satego X200 does not start since it hangs...
The Power Led lights up for 3 seconds, nothing more. I wasn´t change something since the last half year. What happend???
2 days ago it started and worked for an half hour but after this, the same problem... Toshiba give me no answer about my question and i wait since one week...Hi
Nobody can provide exactly answer to your issue.
I mean only an technician who checked the single parts can say what part could be affected and faulty.
We can only provide some suggestion
First of all remove the battery and disconnect the AC adaptor. Wait 1 hour and connect both parts again.
Then try to power up the unit. If this will not help then its a serious hardware problem and you should get in contact with authorized service provider in your country. -
Can we use IF statement in PDF templates
Hi,
I developed a PDF template. I need to underline ang bold the records based on a specific condition. Can we use IF conditon in PDF templates. Please suggest.
Thanks...Billy Verreynne wrote:
The case syntax is a bit funny though as there's not a single condition evaluation (like a DECODE or case structs from some other languages).
This is what I would expect a typical case struct to look like - evaluating a single condition:
case <condition>
when <value-1> then return <result-1>
when <value-n> then return <result-n>
else
return <return-z>
end
?:| You mean like this...?
SQL> ed
Wrote file afiedt.buf
1 select empno, ename, deptno
2 ,case deptno
3 when 10 then 'This is Department 10'
4 when 20 then 'And department 20'
5 when 30 then 'And of course department 30'
6 else
7 'Blimey it is something else!'
8 end as dept_desc
9* from emp
SQL> /
EMPNO ENAME DEPTNO DEPT_DESC
7369 SMITH 20 And department 20
7499 ALLEN 30 And of course department 30
7521 WARD 30 And of course department 30
7566 JONES 20 And department 20
7654 MARTIN 30 And of course department 30
7698 BLAKE 30 And of course department 30
7782 CLARK 10 This is Department 10
7788 SCOTT 20 And department 20
7839 KING 10 This is Department 10
7844 TURNER 30 And of course department 30
7876 ADAMS 20 And department 20
7900 JAMES 30 And of course department 30
7902 FORD 20 And department 20
7934 MILLER 10 This is Department 10
14 rows selected. -
In alv report can i use control break events? if no .whay?
Hi all,
in alv report can i use control break events? if no .whay?hi,
you can use control break statements in ALV report.
for example: if one PO is having more than one line item, that time you need to display PO only once. -
I need to uninstall and reinstall iTunes (it won't let me update). I have IE 8 on Windows XP, and iTunes 10 something. In my Program files list I see iTunes and iTunes (2) and even iPod and iPod (2) where a tech had to back up and do this for me before. I'm just trying to fix it all. I keep getting the "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below." I can even run a search and find the folder, but it gives me the same error message. I was planning on using the Microsoft Fix-It tool to help uninstall then Reinstall iTunes. But I need to backup my library. So, how do I copy or back up my iTunes library of over 1,500 songs? Can I copy the folder to desktop or can I use a Flash Drive to backup my music? I don't want to do anything until I know for sure how I can backup my songs, and then reinstall them into iTunes. Thanks for any help.
Ok, thanks that helps. I don't have an external hard drive though. What about backing up through 'the cloud'? I'm just wondering since my husband syncs his iPod to the PC through iTunes and he's worried that he will lose all the songs on his iPod if the library is lost from iTunes and he tries to 'sync' it up again. I'm not exactly sure how to 'copy the entire iTunes folder' either. I kinda suck at this unless I have step by step instructions, which I haven't found yet on iTunes help or other sources.
The only way I know how to back anything up is by going back to a restore point, etc. (as stated before, we don't have an external hard drive.)
Thanks for the info.
Maybe you are looking for
-
I have an iPhone 4 still running 6.1.3 software. A few days ago it stopped working through my car's USB connection (I have a 2010 Honda Civic Hybrid). I can no longer control my music through my car's stereo system. I am unable to choose what song
-
I have a C4240 All-in-One printer and am getting an error message on the display panel "carriage Jam". I have not given this printer any kind of abuse. I do leave it turned on but hardly ever print to it. I have replace the cartridges probably twi
-
HT1229 What happens to photos in an album in iPhoto on Mac when upgrading to Yosemite.
What happens to all the photos in iPhoto when upgrading to Yosemite. My pictures are in an album to be made into a photobook with Shutterfly or another service but it is not entirely ready to go. I would not want to loose this album, took me a long
-
Developer 6.0 for Solaris
When will a trial version of Oracle Developer 6.0 be available for Solaris 2.x? null
-
Screen layout for pr and PO in respect to Material master
Dear Experts, I know that we can control the screen layout display, optional... with respect to document type... But there is one requirement... When there is BATCH activated for the material... in Material master( batch avl) the "batch" field in PR.