Can I use Reader X to draw freeform lines on documents I "saved as PDF" from Word?

I would like to use the feature described as follows on the Adobe website: "Review documents with a complete set of commenting tools such as sticky notes, highlighting, lines, shapes, and stamps."
According to the website, Adobe Reader X can use this feature if the PDF has had that option enabled when it was created in more full-featured version of Acrobat.
I would like to know, Does a document that I've saved as a PDF from Word (using Save As) count as having that feature enabled?
Thank you,
James

With PDF files created using Word(Save As), you can only add sticky notes and use highlighting.
You will have to use Adobe ACrobat to create a PDF with has Commenting enabled for Reader also.

Similar Messages

How can i use this library to draw squiggly line below word for RichEditable?

Squiggly Release Notes:
AdobeSpellingFramework.swc
A class that facilitates the drawing of squiggly lines below words for various text components.
Im not using squiggly spell check egine bcause it is not supporting arabic language.
Rest of the work i have completed, i just want to draw squiggly lines below word.
Please help me.....Thanks

Did you ever get an answer for this ?

Can't use "read the information"

hello every body
first excuse my english... I'm french and my studdies are far...
I can't use "read the informations" .
When I try, nothing appens and within a few seconds, the finder restarts.
if I did something wrong, I did it on my two computers (pb G4 ti and imac G5) same problem on both...
thank you for your answers...

You will be able to the get this information using the VISA Driver Development Wizard. You can read more about this tool at the following link:
http://zone.ni.com/devzone/conceptd.nsf/webmain/ADF3152837E2B4A486256B5600642AC7?opendocument
This document explains in detail the process required.

Can I use Read table

Can I use read table instead of multiple select & loop statements.
Any one please give me the sample code ..how to do it.
Thanks in advance

Hi,
Yes you can use read instead of nested loops and select which will affect the performance.
REPORT zkeerthi_ITABLE9                          .
tables:vbap,vbak,vbkd.
data:begin of it_vbap occurs 0,
     vbeln like vbap-vbeln,
     matnr like vbap-matnr,
     end of it_vbap.
data:begin of it_vbak occurs 0,
     erdat like vbak-erdat,
     ernam like vbak-ernam,
     vbeln like vbak-vbeln,
     end of it_vbak.
data:begin of it_vbkd occurs 0,
     konda like vbkd-konda,
     kdgrp like vbkd-kdgrp,
     vbeln like vbkd-vbeln,
     end of it_vbkd.
data:begin of it_final occurs 0,
     vbeln like vbap-vbeln,
     matnr like vbap-matnr,
     erdat like vbak-erdat,
     ernam like vbak-ernam,
      konda like vbkd-konda,
     kdgrp like vbkd-kdgrp,
     end of it_final.
parameters:v_matnr type vbap-matnr.
select vbeln
       matnr
       from vbap
       into table it_vbap
       where matnr = v_matnr.
select erdat
       ernam
       vbeln
       from vbak
       into table it_vbak
       for all entries in it_vbap
       where vbeln = it_vbap-vbeln.
select konda
       kdgrp
       vbeln
       from vbkd
       into table it_vbkd
       for all entries in it_vbap
       where vbeln = it_vbap-vbeln.
loop at it_vbap.
read table it_vbak with key vbeln = it_vbap-vbeln.
move :it_vbak-erdat to it_final-erdat,
      it_vbak-ernam to it_final-ernam,
      it_vbap-vbeln to it_final-vbeln,
      it_vbap-matnr to it_final-matnr.
      append it_final.
read table it_vbkd with key vbeln = it_vbap-vbeln.
move:it_vbkd-konda to it_final-konda,
     it_vbkd-kdgrp to it_final-kdgrp.
     append it_final.
endloop .
sort it_final by matnr.
loop at it_final.
write:/ it_final-vbeln,
     it_final-matnr,
     it_final-erdat,
     it_final-ernam,
      it_final-konda,
     it_final-kdgrp.
endloop.

I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

No, it is not a backup method at all. If you delete a sync'd file on any device, you delete it permanently from iCloud. That by its very essence is not a backup solution therefore. A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

I seem to have lost carrier settings on my iPad1,I've tried a restore and update but get a message about the original sim card,which I still have but is inactive,really inconvenient as I can only use in wifi spots and off line mode,please help,sibear.

I seem to have lost carrier settings on my iPad1,I've tried a restore and update but get a message about the original sim card,which I still have but is inactive,really inconvenient as I can only use in wifi spots and off line mode,please help,sibear.

You might want to download something called an undelete utility. These can find files and recover them even after they appear to have been lost. There are some undelete utility programs that are free. Look at tucows.com
Also, it appears that you have POSSIBLY overwritten the actual files, which you moved manually, with I don't know what, which you moved in PSE's folder location view.
Next, in the future ... NEVER (that's: don't even think about it) move your photos in Windows. NEVER. NEVER. Not ever. Not once. This always (that's ALWAYS, as in 100% of the time) causes problems and usually makes things difficult to fix.
Lastly ... make regular backups! I must say this in the forums about seventy bazillion times a month. Make regular backups! Regular depends on how often you take photographs and edit them. Since my photographic activity usually happens on the weekends, I make backups every Sunday night. You may need a different schedule, depending on your activity level. MAKE REGULAR BACKUPS!

Hello i want to learn that if i buy adobe can i use it two of my computers or only which one i buy it from ?

hello i want to learn that if i buy adobe can i use it two of my computers or only which one i buy it from ? pls answer it,waiting to buy it

For example you can activate on your home computer and another that you use for travel or work. You cannot let someone use that second computer at the same time you are using the first.

How can i use in the same time input line and mic to recorder in several track whit SONAR

I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english

LIMACAR wrote:
How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english
Depending on which soundcard you have there, but if your card is capable for
ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
MME32 - > same w/ WDM/KS
If you use Asio4All --> same w/ WDM/KS & MME32
No mic and line source simultaenously w/ WDM/KS and MME32.
You perhaps be able to do this w/ kX drivers.
jutapa
ADDED:
You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

What formula in numbers can I use when I want to know how much 19 % is of the numbers from (let's say) e6 up to e27 ? thank you

what formula in numbers can I use when I want to know how much 19 % is of the numbers from (let's say) e6 up to e27 ? thank you

thanks a lot jerry.
Can I ask you another question?
it works well but it gives me a number like 14,567
and I would like it if it will automatic round up an give me the number 15 in this case.
I do know the seperate folmula to round up numbers but can I combine the two formula's ?
thank you and bye bye

Hi can I use apple pages to create a line or scatter graph ?

Hi can I use apple pages to create a line or scatter graph ?

If you need to see the legal document that makes this OK see this Apple document, section 2C

Can't create PDFs from Word due to Cambria font. Help.

I'm using win 7 32 bit office 2010 acrobat pro 9. I can't create pdfs from word because of problems with cambria. I've ttried all the fixes I can find but none worked. Any more ideas?
[thread title updated by moderator]

How are you trying to create the PDF? With AA9 you have to print to the Adobe PDF printer or use the MS plugin.
When you say you cannot create PDFs because of Cambria, what error messages are you getting and copy them here? At this point we really do not know what you are having problems with or how you are trying to create PDFs.
In the future, please provide a topic to help folks that are stepping through all of the posts. A blank topic almost led me to simply skip your post.

How to save edit settings under preferrences to use when creating or printing a PDF from word 2003 Windows PC 8.1

I have tried to save my PDF settings after editing them, but when I go to "Print" to PDF and check the settings I keep getting Standard default settings.
There is no Adobe PDF listed as a file heading to change conversion settings on my Word screen.
I have tried to create a PDF by open file through the Adobe application and also by trying to print through the Word application with document open and using Adobe PDF as the printer driver.I have changed or edited the settings but they do not appear as an option to select, just the standard default settings.
I have been able to save my setting as a Adobe PDF job options, but can't access them or use them when it comes time to convert to PDF.
Any help would be appreciated. Thanks

I have apprached it 3 different ways:
- by opening acrobat and going to preferrences, clining on convert to PDf
- Microsoft Word, then changes each section of the edit settings, ie
general, fonts, images, etc make the cahneges then hit OK, at this point I
get a save as option rather than a save. It saves my changes as a PDF, but I
am not able to access it when I go to make the PDF.
- I also have tried to print PDF from Word and got to properties to make
the changs with the same results as above.
- Then I tried yur suggestion and went to the printer in the control panel
and had the same results.
I am using mircosoft word 2003 which has been compatable with my windows 8.1
I think the problem may be I am using a "trial" version of Adobe Acrotbat DC
2105 version. It must not belettingme save the setting changes.But this
shouldnot be if they want me to really experience the full effects of the
program.
I appreciate your help, thanks

Can't convert to pdf from word

my wife uses adobe acrobat 6.0 standard with office 2003. The problem is that she can't convert to pdf from word. it works fine with an excel doc. but not a word. I did update to 6.0.1 and still nothing. There is no error message and the word document opens but nothing happens.

I have exactly the same problem. Everything was ok untill a couple of months ago then after some auto updates the pdf buttons were no longer displayed in the word documents when it is open and if you try to convert it to pdf either by dragging the word file onto Adobe or highlighting the file and right clicking on it then selecting 'convert to Adobe PDF' it doesn't work. It looks like it attempts to do it by opening the word document but then nothing else happens. The only way I have been able to get it to convert to pdf is to go into the word document, click on file then print then select Adobe PDF then save to location. This is just a complete pain to do all the time especially when I need to convert a whole load of files in one go.
Obviously the auto updates have effected it somehow but I can't work out where.
I've tried uninstalling Adobe the re-installing it but it makes no difference.
I'm using Acrobat 6.0 Standard with Windows XP Professional 2002

Using a trial version of Acrobat X1 I am unable to open pdfs from Firefox. Solution?

Using a trial version of Acrobat X1 I am unable to open pdfs from Firefox. Solution?

Which operating system?
Have you tried using other browsers?

I can not use the Acrobat DC Cloud. How do I get an Acrobat PDF Reader that does not use the Cloud?

The subject pretty much says it all.
I can not save sensitive corporate files on your Cloud.
Even for non-sensitive PDFs, I do not always have access to the cloud when I need to view or work with a PDF.
I need a non-cloud version of Acrobat Reader.
When Reader DC installed onto my system it must have blown away Reader XI.
After I uninstalled Reader DC, now I can't open/read PDFs anymore.
Also, I can't find a copy of Adobe Acrobat to install that isn't cloud dependent.
This is a problem for me.
Besides all that, NOW I get error messages every time I try to re-install Reader DC.
See below.
So, today at work, I can no longer open PDFs.
Thanks? NOT!
HELP!
Gene

Here, I finally have a solution.
Gotta love Google.
More helpful than Adobe so far.
Note: Clicking on the link below will immediately open the download dialogue box.
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.1/en_US/AdbeRdr1011_en_US.exe
I used this download to install, and the Installer was flawless.
Thanks everyone who contributed ideas and potential solutions.

Can I use Reader X to draw freeform lines on documents I "saved as PDF" from Word?

Similar Messages

Maybe you are looking for