Can i use Realtek 8139 drivers

Hi
i have chep D-link DFE-538TX network card it's based on low cost Realtek 8139 chipset there are drivers from realtek for solaris 8 but i'm not sure if these drivers will work with my d-link card, i want to install this card on my solaris 8 (x86) pc
can anyone help
TIA

oh ok, well thanks for the quick response. does anyone know where I could find a driver for ZSP then?

Similar Messages

Satellite P500-12D - Can I use the nVidia drivers?

The Latest NVIDIA Drivers on the Toshiba update website are 8.15.11.8642 but there are newer versions on the NVIDIA website. I would like ot update the NVIDIA Drivers but I am having difficalties.
I tried to install version 195.62 (Win7 64bit) for the Geforce 200M Series fron the NVIDIA SITE but the install doesn't complete. I get the message: "The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."
Does Toshiba only allow their own versions of the drivers? Is there a way to allow the NVIDIA drivers to istall?
SYSTEM INFO: OS WINDOWS 7 64bit
Date 2010/01/03 01:14:58
[PC Information]
Model Name SATELLITE P500 12D
Part Number PSPG8E-01D007EN
Serial Number x
OS Version Microsoft Windows 7 Home Premium 6.1.7600
BIOS Version V2.50
CPU Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz
Physical Memory 4096MB RAM
Hard Disk Capacity 749,744,054,272 [Byte] 698.254 [GB]
Hard Disk Free Space Capacity 644,687,319,040 [Byte] 600.412 [GB]
Video *NVIDIA GeForce GT 230M* version=8.15.11.8642
Screen Resolution 1680 x 945 Pixels
Color Quality True Color (32 Bit)
Sound NVIDIA High Definition Audio version=1.0.0.59
NVIDIA High Definition Audio version=1.0.0.59
NVIDIA High Definition Audio version=1.0.0.59
NVIDIA High Definition Audio version=1.0.0.59
Conexant Pebble High Definition SmartAudio version=4.98.6.63
Network Atheros AR8131 PCI-E Gigabit Ethernet Controller version=1.0.0.17
MAC Address=00:26:9E:90:F3:E7
Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
version=2009.1.1222.2009 MAC Address=00:26:B6:9A:1E:2F
Modem None
Internet Explorer 8.0.7600.16385
IDE Device TOSHIBA MK5055GSX
IBG 4H6Z0XEVG SCSI CdRom Device FW version=1.03
HL-DT-ST DVDRAM GT20N FW version=CT10
[QFE Information]
Windows Security Update "KB973525"
Windows Update "KB974332"
Windows Update "KB974431"
Windows Security Update "KB974571"
Windows Update "KB975364"
Windows Hotfix "KB975467"
Windows Update "KB976098"
Windows Security Update "KB976325"

Hi
Counter question: Why you want to use other display drivers? Are you not satisfied with the Toshiba drivers or can you notice any problems in Windows?
Theoretically its possible to use the drivers from nVidia directly but dont forget that they are not pretested on your notebook. Your graphic card could be overheating and so you will loose the warranty.
Satellite P500 is pretty new so I assume Toshiba will update the display driver in next time too. Just have a look on the page from time to time. ;)

Hi can i use xp recovery disk for dv2000 to downgrade a dv2000 with vista pre installed thanks

Hi
i have 2 dv2000 laptops with different model no,s
one with xp factory fitted and one with vista factory fitted
can i use the xp recovery disks from the xp laptop
to downgrade the vista to xp or is it better to install windows 7 please
many thanks
maggieglanville
This question was solved.
View Solution.

Hi:
You can probably downgrade your Vista notebook to XP, but you don't have a license (downgrade rights) to do that from Microsoft.
Normally, only business notebooks and desktops were given downgrade rights to XP due to the risk of companies operations grinding to a halt because of software incompatiblities with some programs and Vista.
Personally, it would be better anyway to move on up to Windows 7.
Since your notebook came with Vista, it can run Windows 7. For any missing drivers you may have you can normally use the Vista drivers on your notebook's support and driver page.
Additionally, you may want to read through this dv2000 upgrade guide for Windows 7.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Windows-7-Upgrade-Guide-for-dv2000-model...
Paul

Can I use LINUX Drivers in Solaris 10...

As a beginner, I have installed Solaris 10 version 08/07 onto my system. The motherboard is ASUS M2A-VM, with integrated graphics, network interface, audio, etc...
My audio and network interface are not working... The motherboard came with a cd which has windows drivers and additional software.
It also has linux drivers for:
Audio:
Core5
Core6
Linux
RHEL4
SUSE10
Other
realtek-linux-audiopack-4.05f
LAN
FreeBSD
Linux
SCO_OpenServer6
Unixware7.x
Chipset, and RAID!
Has anyone used any of these ASUS Linux drivers with Solaris...
If so what steps do I need to take to get them to work on my system! (I hate to ask, I know you all have better things to do) Maybe you can point me to a good book that explains how to go step by step...
My question is how do I get my NIC to work (What steps do I need to follow? the sound is not an issue, as, I can do with out that. Will any of the drivers mentioned above work?) thank you in advance for your answers...

Drivers are the "connective tissue" between the Operating System and the hardware. The connections from the drivers to the OS are not compatible between different operating systems, so no, you cannot use Linux drivers in Solaris.
If the OS is similar enough you can sometimes get away with it -- example, using Solaris 9 drivers in Solaris 10. But between completely different OSes? Won't work.

How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
But reading more on it, I think I was supposed to use Bootcamp to do it for me...
I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
I had a partition so thought Bootcamp wasn't required for my needs.
But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
So I need to know the following:
1) How to know I'm broadcasting my SSID - where do I find this in settings?
2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
And that is my main task - getting the Internet up and running in Windows 7.
Other Info:
I'm running Mac OS X 10.6.8 with 2 GB of memory.
I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
Hope you can help.
Thanks.

I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others.

Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
MSI P-35 Platinum
Q6600 Core 2 Quad
Presently XP 32Bit
NVidia geforce 8600GT
8GB DDR2 SDRAM PC6400-800MHz
Windows 7..waiting to be installed.
Hello,
I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista. Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers? When do i install these drivers....before the OS install, or after?
Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?
Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.? People tell me that there is a chance of the OS installing sometimes on the other drives.
Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
Thx

I've never had this much trouble hooking up a HDD.
I have two IDE DVD/CD ROMS. (My RAID MODE was IDE in XP OS, and still is with WIN7.)
I have three SATA HDD's.
After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor. Seems no matter what I change in the boot sequence,it never wants to boot properly
....AND THEN,
I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy. Win. Explorer also listed them in that folder, in device manager, it listed all three too.
The managed window showed this:
74GB (system,active,Primary partition) Storage
2TB (Primary partition) Excessive Storage
500GB (Boot, page files,crash-Dump, Primary partition) Operating system
Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
Before I just got online, I tried RESTART, and it opened Windows the usual way, so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS. Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE. My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.
So what is the preferred boot sequence?

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded?

When plugging in my iPhone to my PC, I get message "The registry settings used by Itunes drivers for importing and burning CD'd and DVD's are missing..." Can I uninstall and reinstall the iTunes app without losing all the tunes I've purchased/loaded

many thanks.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Can I use / find drivers for an HP Deskjet 3520e on OSX 10.4.11

Can I use / find drivers for an HP Deskjet 3520e on OSX 10.4.11

Thanks for suggestion but HP Support Center don't support the HP Deskjet 3520 e.
Our old iMac wont upgrade to "snow-leopard" - the drivers supplied with the printer are not backwards compatible beyond IOS 10.6. We are max-updated at 10.4.11.
Tried a "gimp" (?) set of drivers which goes through an auto-install but I can't see or select the drivers.
Find it hard to believe that there is no solution

Can i use oracle 7.3 drivers against oracle 8 database.

When i'm executing a stored procedure with 8i driver i'm having a problem saying "Cannot Save or Rollback in distributed transaction". But when i use oracle 7.3 drivers i'm not having any problem.My question is , Can I use oracle 7.3 dirvers with oracle 8 database.
null

I tried disabling MTS. That doesnt look to work. Somehow 8i drivers are working in a distributed transaction mode by default. I resolved configuring 8i drivers as not to use distributed mode and works fine for me.
For other who had this same kind of errors Solution is :
Disable distribution transaction off if you are managing manual transactions from your scripts. Example: connectstring= DNS=...;"DistribTx=0.
Justin,Thanks for your concerns and reply.

Windows 8.1 can't use older Brother DCP8040 network scanner drivers

There are a lot of older multifunction centers and scanners that will not scan across a network to a windows 8.1 pc. Upon migration to 8.1 many of us are losing our ability to scan across our networks. I have a lot of Brother DCP8040 machines
out there. Brother refuses to rewrite and support network scanning capabilities under win 8.1 for its older machines. The drivers we now have support network scanning under XP, Vista and win 7... but not under win 8.1. Win 8.1 cannot
find the scanner on the network. I can connect a DCP8040 directly to a win 8.1 pc, load the drivers and both print and scan. I can print across the network, but cannot scan. Again, windows 8.1 cannot find the scanner on the network.
Anyone know of any 3rd party solution where the older scanner drivers can be used under win 8.1? My clients refuse to migrate to win 8.1 as it means they have to trash the older MFC's and make considerable investments in new equipment.
I am reading that the same problems are being experienced with older HP, Epson, and Cannon scanners. Someone has to come up with a generic solution.

Maybe you've been at it too long. That is an answer/comment in typical MS big business mentality. You are dramatizing the whole thing to suit your premise. You are overestimating the time necessary to write the driver and you are understating
the significance/size of the problem and the potential return. Stocks of the Brother DCP8040 are still being sold new and refurnished. Literally millions of other brands and models are being affected. So it is not like these machines wont be around
tomorrow. Its not like the problem is not significant enough to draw attention.
If you've really been around that long, go back and think about when you started. If I had a dime for every solution that was sold as freeware "as is" with no support and the condition "if it works, if works, if not,
sorry". But so many have worked and have provided a solution.
I am not suggesting that anyone should jeopardize their personal or corporate well being or devote their entire work week to solve the problem. There are many out there who will write the thing and put it out there as freeware, collecting
donations, just to see if they can do it or help the situation. There are those who even relax buy doing such things, "solving the problem." I mean, if it takes 5-40 hours work, I would be surprised. I myself can write, but I just don't
understand enough about the workings of a printer driver across a network to do the job.
Again, WHERE ARE YOU? And the proof in my words would be for someone to take the task and do it. Again, HEY, WHERE ARE YOU GUYS?

I have installed nvidia graphics drivers on windows 7 (bootcamp) now i can't use windows, it's just a black screen, how do i resolve this?

I have installed nvidia drivers from nvidias website for my geforce gt 650m on my early 2013 macbook pro retina 15", now i can't use windows in bootcamp, whenever i go into windows it turns into a black screen before i can see my desktop. How do i resolve this?

From the home screen, double click the home button to bring up the Recently used App list. Find the App with the problem and hold your finger on it untl the Apps start to shake. When that happens tap on the (x) on the right side corner of the app to close it.
Tap the home button again to get back to the home screen, and try to open the App again.
If that doesn't work, try resetting the iPad. (there should be no data loss):
Press and Hold the Power and home buttons until the Apple Logo shows up. Ignore any sliders that may appear.
When the iPad turns back on, try opening the App again.

Can you use Windows 7 Support software (drivers) for Windows XP on bootcamp?

I'm just wondering, I'm installing windows XP on my mac running lion. I don't have my lion install disk but Im able to install 'windows 7 support software' from bootcamp which I put on a usb flash drive. My friend says I can use that for Windows XP drivers but i'd just like to ask here.
So basically, can I use windows 7 mac drivers for windows XP? If not is there anywhere I can download them?
THANKS

http://support.apple.com/kb/HT5634

Can I use my Dell EP disk, or is it laden wth Dell Drivers and I must buy 1

I didn't check all 15,476 mesages, so if it was asked a dozen or so times.please forgive. Simple questiøn, can I use the XP OS from MY dell disk, and ˆif yes, what if anything do I need tstrip off., and then add back on?
Thanks,

You don't need to read all 15,000+ messages. The next time you can use the Search Discussions feature (upper right corner) to narrow the scope of messages specific to your question. Many folks can answer their own questions without the need for repeating what's already been asked.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.8)

How can I use bluetooth on my Satellite C850-B906

Please help me. How can I use bluetooth on my C850-B906 Satellite. I can't find it on the search bottom and even in PC Device, bluetooth is not there. This laptop has bluetooth according to its specs. (Bluetooth / W-LAN (802.11B/G/N).
Any good answer will be highly appreciated.
Thanks in advance!

Hi
First of all: you are right: the Satellite C850-B906 supports Bluetooth
http://www.toshibamea.com/CSPDF/Satellite_C850-B906-52424.pdf?ran=4qmi69d8z1
But the notebook was not preinstalled with an Windows system and therefore I guess you installed the Windows OS (which one?) at you own hand.
Probably you did not install the essential software / drivers which would allow you to use the BT
The Realtek WLan module supports BT and therefore you have to install the Bluetooth Filter Driver Package a well as the BT stack from Toshiba driver page.
After that you have to use the function key combination to enable the BT.

MSI 975X with Realtek HD drivers - cannot adjust recordin levels, stereo mix gra

Called MSI and they could not help me.
Have XP and 975X Power up board. I know there is a shortcoming in the Realtek software drivers as per what I read on Google. Have not found a fix, wonder if others have.
Recording Sliders (volume) are grayed out and not move-able (locked) for recording volume for anything except Master Volume.
Cannot adjust line-in volume or stereo mix for recording.
Ideas without putting in a 3rd party card?
Thought I had this working once but perhaps I never did.
Tried uninstall, reinstall, safe mode install, old drivers, new drivers, blowing away drivers, every checkbox under the sun. Thought I found a registry fix somewhere but I cannot find now.
Thanks so much
Peter

Hello Peter,
Quote
Recording Sliders (volume) are grayed out and not move-able (locked) for recording volume for anything except Master Volume.
This does not have anything to do with your mainboard. It is basically a limitation of the Realtek Sound Drivers for Windows XP. Google "Realtek Mixer XP" and look at the images you find. No individual recording sliders to be seen, no matter what board. Here is an ASUS Example Screenshot:
If you need to adjust microphone input volume, go to the Playback part of the mixer and scroll it to the right using the <> buttons until you find a slider for the jack you microphone is plugged in (compare picture above, I don't have an MSI Screenshot at hand). You can enable microphone boost here and adjust the input volume. The same is true for Line-In.
In case of microphone problems, make sure you microphone is calibrated. There is an application in the Realtek installation folders called "miccal.exe". Run it to calibrate your microphone.

Can i use Realtek 8139 drivers

Similar Messages

Maybe you are looking for