Can I use remote Drive sharing from my MBP to install OS X 10.6 on a White macbook

Hey all,
I have a 1st gen MBP 15" running OS X 10.6.8, and a White Macbook, The macbook's Drive s dead and its way out of warrenty, it as all the specks needed for snow leopard I just need to know if I can use the MBP disk drive remotly to install snow leopard?
Any answers or help would be much apprieciated.
Gary

If your MacBook and the MacBook Pro have FireWire ports you can install by Target Disk Mode. You'll need a retail version of SL .Start up your the MacBook Pro with your install disk. After you get to the install screen on the MacBook Pro connect your MacBook to the MacBook Pro in Target Disk Mode with a FireWire cable http://support.apple.com/kb/HT1661
Then open Disk Utility from the Utilities Menu on the Menu Bar on the install disk. You should see both your MacBook and the MacBook Pro hard drives in there. Erase and partition your MacBook drive and then choose that drive when you go back to the install screen

Similar Messages

  • Can I use hard drive cable from 15" MBP in 13" MBP?

    I'll start of with the tl;dr:
    My mid 2012 13" MBP is acting up and I believe it's the hard drive cable that is broken. Thing is, I've got an early 2011 15" MBP with broken GPU. Can I salvage that cable and use in my 13" or will something go to ****?
    Problem in general is my 13" MBP doesn't work properly with the connected hard drive. I can boot from an external drive without any issues and I can even see the internal one (luckily I could rescue all my files this way, albeit it transfering them was slow as ****) but I can't boot from the internal one, the computer just stucks on the apple logo forever.
    I've also tried reinstalling the OS and managed to start the installer but after installing for roughly 5 hours it got stuck at "less than one minute remaning" over the night so I killed it. Then I tried putting the hard drive in a USB-case and it worked fine. And then I tried another working hard drive as the internal drive and experienced the exact same problem.
    Edit: spelling From googling I've concluded that the mid 2012 13" MBP has had issues with broken hard drive cables, so I figured I'd try that. But it would be nice if I didn't have to buy a new one and wait for it to ship
    Any help is welcome!

    " I've got an early 2011 15" MBP with broken GPU."
    You know there's a recall on that model:
    Apple Recall:
    https://www.apple.com/support/macbookpro-videoissues/
    Yah don't think swapping the cables will work. Since there's a recall on your 15"  I wouldn't go messing around inside least you get rejected for recall for modding.

  • Can I backup a drive shared from (not to) an AE.

    I have a drive that I'm sharing via my AE. (Air drive) Is there anyway to backup this drive to one of my Mac's USB drives?
    KRR

    Yes. One option to do so is Prosoft Engineering's Data Backup 3.

  • How can i install windows on new macbook air using remote drive on the bootcamp partition

    Hi all, I just purchased a new macbook air mid - 2011 with OSX-Lion installed on it. I wish to install Windows XP on the boot camp partition but have not purchased the external super drive. Is there some way that I can install windows on boot camp using remote drive of my other macbook pro system.
    If this is possible, then please guide me.
    Thank you,

    Since I do NOT use anything from M$, I am afraid I am not right person to help you.
    I would suggest that you post your question for help over in the BootCamp forum loacted here
    https://discussions.apple.com/community/windows_software/boot_camp
    Allan

  • HT5287 Can I use remote disk on a 2008 unibody MacBook with no optical drive?

    Can I use remote disk on a 2008 unibody MacBook with no optical drive?

    According to the link you came from the only MacBooks this works with are MacBook Air and MacBook Pro with Retina display. If yours is not one of these I can see no harm in trying it.
    You could consider getting an external optical drive.

  • If i remove i-tunes then re-install it will i loose all my music? I accidently removed bonjour now can't use remote., If i remove i-tunes then re-install it will i loose all my music? I accidently removed bonjour now can't use remote.

    If i remove i-tunes then re-install it will i loose all my music? I accidently removed bonjour now can't use remote., If i remove i-tunes then re-install it will i loose all my music? I accidently removed bonjour now can't use remote.

    Hello Footr,
    The following article provides the answer to your question, as well as steps for completely removing iTunes and related components:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
    Thanks,
    Matt M.

  • Can't recognise remote drive

    I recently bought a MBA and turned on sharing with my MBP. However it can't seem to read Cds from the MBP. Can anyone help?

    Dan Burk1
    Welcome to the Discussions.
    There are a lot of questions about prior history of the 520 that could have useful diagnostic answers here, but let's take it that this is a new behaviour after a period of normal behaviour. Inactivity plays merry **** with PBs of that vintage, especially when they are not attached to the AC mains and are allowed to exhaust not only the main battery but also the backup. The Power Manager then simply lapses into coma.
    Non-recognition of a drive can be caused by no or wrong formatting of the drive, or corrupted driver, boot blocks or System Folder. Presumably the HDD spins up (or rather, rattles up) if Norton can see it. The inbuilt SCSI Disk mode, which resides entirely in ROM, can be useful here. Do you have a desktop Mac from which you can attack the PB through a HDI-30 to DB-25 cable? If you do, you can backup the drive (if it can be mounted on the desktop's Desktop) and then give the PB's HDD a total going-over.
    Alternatively, since you already have accessibility by way of the Zip drive, if you have the means to install software onto your Zip disk, a suite including a new OS (for the PB), and included disk utilities with more oomph than Apple's, may be all that you need.

  • What device can I use to transfer photos from Iphone5s. Don't want to use my computer.

    What external device besides my computer can I use to transfer photos from
    my Iphone 5s.  Do I have to transfer to my computer and then external device?

    Normally the transfer is to your computer, treating the phone as a digital camera. However, you can also enable Photo Sharing. Or use Box.com or Dropbox. Or a 3rd party app such as MyPics that can save them to a Google Picasa site, or Shutterfly that can save them to Shutterfly albums.

  • Can I use iCloud Drive online only?

    Can I use iCloud Drive online only? I don't want to store everything on my macbook pro. I only have 128 GB SSD and I don't want to fill it up with photos, music, etc. I still want to see everything in finder in the iCloud Drive folder, but I don't want it to be saved on my macbook.

    Yes I know, but I want it to be used as external storage, not something where I store copies of stuff that I have already on my macbook
    But iCloud Drive is not an external storage. It is a common storage that is synced and shared between all connected devices, and it is always available, even when you are not connected to the internet.
    What you want to do is not possible with iCloud Drive.

  • Can I use the installation disc from a 15"macbook pro to restore my 17" since I can't find the discs

    can I use the installation disc from a 15"macbook pro to restore my 17" since I can't find the discs

    There's nothing at the Apple Store. Whatever you need you will have to get elsewhere. You can download Mountain Lion if you have Snow Leopard 10.6.8 and an Apple ID. See:
    Upgrading to Snow Leopard, Lion, or Mountain Lion
    Upgrading to Snow Leopard
    You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    Before upgrading check that you computer meets the minimum requirements:
    Snow Leopard General requirements
      1. Mac computer with an Intel processor
      2. 1GB of memory
      3. 5GB of available disk space
      4. DVD drive for installation
      5. Some features require a compatible Internet service provider; fees may
          apply.
      6. Some features require Apple’s MobileMe service; fees and terms apply.
    Upgrading to Lion
    First, you need to upgrade to Snow Leopard 10.6.8 as stated above.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
    Before upgrading check that you computer meets the minimum requirements:
    Lion System Requirements
      1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
          Xeon processor
      2. 2GB of memory
      3. OS X v10.6.6 or later (v10.6.8 recommended)
      4. 7GB of available space
      5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    Be sure your computer meets the minimum requirements:
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
      1. iMac (Mid 2007 or newer)
      2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
      3. MacBook Pro (Mid/Late 2007 or newer)
      4. MacBook Air (Late 2008 or newer)
      5. Mac mini (Early 2009 or newer)
      6. Mac Pro (Early 2008 or newer)
      7. Xserve (Early 2009)
    Are my applications compatible?
    See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
    Am I eligible for the free upgrade?
    See Apple - Free OS X Mountain Lion upgrade Program.
    For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

  • How can I use remote disk?

    I just installed bootcamp on my Macbook Air. How can I use remote disk so that I can put a disc in my Mac Mini and use it in Windows 7 on my Air?

    Here are instructions directly from Apple: http://support.apple.com/kb/HT1777?viewlocale=en_US

  • Storage spaces can only use whole drives

    One of the features that I was really interested in with WS2012E is storage spaces as it replaces the old driver extender of WHS v1. Having now installed WS2012E onto my WHS2011 box I am bit staggered to find that it can only use whole drives. My box came
    with 2 * 2Tb drives, the first partitioned as boot, then a 60G of OS followed by the rest allocated as storage. I have successfully created a Storage space pool of the second drive but cannot find any way to add the remaining storage from the large partition
    on the other drive into the pool. As the UI just shows me drives rather than partitions, I am bit challenged. I thought that storage spaces was meant to be flexible about adding drives just like the old drive extender. Even add on technolgies like DriveBender
    for WHS2011 allows for a storage space to be made up from this type of set up. So we seem to be going backwards.
    Plus when creating the drive pool it defaulted on a 2Tb drive to a 2Gb size! How useful is that? As soon as I started copying data to the drive it ran out of space. I then had to go in and expand it.

    I note that you did this with Windows Server 2012 Essentials.  I cannot seem to do this with Windows 2012 Standard.  I have two 500 GB disks and 40GB of the first disk, PhysicalDisk0 is partitioned for the OS.  Nothing I do makes PhysicalDisk0
    show up in the Storage Pool area of Server Manager - all I can see is PhysicalDisk1.  (Refer to 'Physical Disks' in the bottom right corner of the previous poster's first screen shot above.  I can only see 'PhysicalDisk1', not 'PhysicalDisk0'.)  If
    I click 'Disks' just under 'Volumes' in the same screenshot above, I can see PhysicalDisk0, and it shows 466 GB capacity, 423 GB unallocated.  PhysicalDisk1 shows 466 GB capacity, 466 GB unallocated.  My intent was to mirror the remaining 423 GB
    on PhysicalDisk0 with 423 GB on PhysicalDisk1.  I would then allocate the leftover 43 GB on PhysicalDisk1 as a 'scratch' disk.  I have tried leaving everything unallocated and have tried all variations of creating volumes and virtual disks, but nothing
    I do makes a difference.  I found other threads related to this issue which indicated there was a flaw in the 2012 GUI and that this process could be done via Powershell.  However, there seems to be a mix of Windows 8 and Windows 2012 in these threads
    and, apparently the Powershell commands I've found apply to 8 and not 2012, as I get invalid command errors when I try to use them.
    Can anybody tell me how to mirror the unallocated portion of the primary disk PhysicalDisk0 (which has a partition for the OS) with a same-sized portion of PhysicalDisk1 with Windows Server 2012?  Thanks!

  • How many apple tvs can i use on one network from one apple account ?

    how many apple tvs can i use on one network from one apple account ?
    if i have 16 in each of my rooms connected to a network switch and a good fiber internet line
    will this work ok from my one account ? or would i neeed a mac book mini with raid storage set up ?
    any help would be very gratfully recived !
    james

    Welcome to the Apple Community.
    Homesharing allows up to 5 computers to be authorised and a total of 10 computers and devices to be associated with a single Apple ID.

  • How can i use my iphone 4 from japan in india

    how can i use my iphone 4 from japan in india

    The only way to use an iPhone from Japan in India is to pay your Japanese carrier for international roaming. Japanese iPhones can not be unlocked.

  • HT1689 Can I use iTunes store credit (from a gift card) to purchase an app for a friend?

    Can I use iTunes store credit (from a gift card) to purchase an app for a friend?

    No.
    (71262)

Maybe you are looking for

  • Paypal code not working in iWeb?

    I designed a website in Dreamweaver on my Windows PC. On it I was selling a book and payment could be made using Paypal so I got the code from the Paypal website, inserted into the DW website and it has been working great for years now. I have today,

  • SAP Purchase requisition (s) for component already archived in  MM

    Hi All, How do i get rid of the messega on cj20n, it comes every time when creating wbs. I suspect the purchase requisition was deleted,and everytime the wbs is created this messega pop out. the user does not want to see it Please help me. Thank you,

  • SAP XI advantages

    Hello XI experts, My company is in the process of evaluating the ETL tools and want to find out the What are the advantages of using SAP XI. Can you people help me convience them to sue SAP XI. I am a BW dev, not much of idea of XI comparisions to ot

  • Accessibility and Pdf Portfolios

    Everything we put on the Internet must be ADA compliant. There was some discussion with previous versions of LiveCycle forms inside a PDF portfolio possibly not being compliant because of the navigation issues inside the portfolio itself. Does anyone

  • ExtJS Create new panel programatically

    Good morning, I am trying to create a widget in a TabPanel extending Multifield Widget, when a field in the multifield is created this one creates a new Tabpanel in the Dialog. But the Tabpanel created, its content is not looking like if the tabpanel