Can I use ReportViewer 2010 from Visual Studio 2013

Hi
I wish to use the 2010 version of the ReportViewer control on a Windows form. This is from within Visual Studio 2013. How would I do this?
Thanks

Good idea. It did allow me add version 2010 to the Toolbox. You can see it as the second ReportViewer in the screenshot below.
But I can't drag it onto a form. It just appears down the end. Any idea why I can't drag it onto the form?

Similar Messages

Cannot install Selenium Components for Cross Browser Testing extension from Visual Studio 2013

Hello,
I am having some issues with installing Selenium Components for Cross Browser testing. I keep getting this error everytime. Yes, Visual Studio 2013 has been registered with a product key. However, I cannot seem to bypass this error. I tried to install
from http://visualstudiogallery.msdn.microsoft.com/11cfc881-f8c9-4f96-b303-a2780156628d and from Tools->Extensions and Updates from Visual Studio 2013. It just does not work. I have a copy of Visual Studio 2013. Yes, I already have Visual Studio
2012 Ultimate and Visual Studio 2013 Ultimate installed on my machine. What am I missing?

Hi Antwan,
Please uninstall the VS, then reinstall it.
On the other hand, this issue is in the extension, I suggest that you should post it in
Selenium components for Coded UI Cross Browser Testing site for efficient response. (Q AND A)
Thanks
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can I downgrade from Visual Studio 2013 Ultimate to VS 2013 professional

Hi have a few licences of Visual Studio 2013 Ultimate and to keep it in line with our other users who have VS 2010 Pro
Am I ok to downgrade the licence from 2013 ultimate to 2010 pro.
The software hasnt been installed on any PC as yet, its just a case of if licensing allows us to downgrade version and edition

@Rakesh Borhara,
By the way, the two products are different. If you only bought the key for your Visual Studio 2013, I don't think you can use the same key in Visual Studio 2010.
Anyway, you can consult the license specialists to ask whether there is a account type for you so that you can use both the two products.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't update SQL 2014 DB during web publish from Visual Studio 2013

According to Visual Studio 2013 I have "SQL Server Data Tool 12.0.40706.0" installed, which should allow me to update a SQL 2014 database but when I try to publish my web application I get the error: "Web deployment task failed. (Could not
generatedeployment script. Internal Error. The database platform service with type Microsoft.Data.Tools.Schema.Sql.Sql120DatabaseSchemaProvider is not valid. You must make sure the service is loaded, or you must provide the full type name of a valid database
platform service. Internal Error. The database platform service with type Microsoft.Data.Tools.Schema.Sql.Sql120DatabaseSchemaProvider is not valid. You must make sure the service isloaded, or you must provide the full type name of a valid database platform
service. Learn more at:
http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_EXECUTING_METHOD.)" I can update the database fine if I go into the package managment console and run -UPDATE-DATABASE but I don't want to have to go into myweb.config, update it to point to the production
database, run the update command, and then change my web.config back everytime I try to update my database. What do I have to do to getthis working? I had no problems when I was on an Azure DB.

Actually problem seems to be related when web publish to remote server. I tried local web publish to sql2014 db and it works.
For remote server web publish works to sql 2012 express db but when try with sql 2014 express db on same server get bellow error.
Error message "The database platform service with type Microsoft.Data.Tools.Schema.Sql.Sql120DatabaseSchemaProvider
is not valid. You must make sure the service is loaded, or you must provide the full type name of a valid database platform service."
Any ideea what may be causing it? I have installed the sql server 2014 express with advanced services x86, exact same version as on my local machine, and also restarted server after install. Need install/configure anything else on server like SSDT 2014 to
make this work?
Cheers!

Can't see table data from Visual Studio Express 2013 for Web

Hello!
I have a problem and I can't see neither the table data nor the table definition for my database inside Visual Studio Express 2013 for Web, Server Explorer. When I right click it just says refresh, copy or properies.
Does anyone know what's wrong?
Thanks a lot!

Hi J1m,
According to your description, I make a test on my computer and I am able to reproduce your issue. Firstly, I install the Visual Studio 2013 express for web successfully, create a project and connect to SQL Server database. Then I right click one table,
and I can see all the options including ‘Show Table Data ’, ‘Open Table Definition ’, ‘Copy’, ‘Refresh’, and ‘Properties’. Next, I uninstall the SQL Server data tools, and restart the Visual Studio, right click on table, and only find the three options
‘Copy’, ‘Refresh’, ‘Properties’ as the following screenshot, which is the same scenario with yours.
Based on my test, the issue could be due to the missing or corrupt SQL Server Data Tools. To work around the issue, you should install the latest SQL Server data tools for Visual Studio 2013. You could download the
ISO file for SQL Server data tools and extract the ISO files to your hard drive following the methods in this
article, and install the data tools. Please restart your computer after you complete the installation.
Regards,
Michelle Li

Can't Create New Excel Project Visual Studio 2013 Office Tools The Project Cannot Be Created

I am having this issue on two computers. If I try to create an Excel 2013 Workbook C# in new projects, and choose create a new workbook, it starts to open Excel, and then I get this error in VS
I have tried:
Uninstall & Reinstall of VSTO from the Visual Studio Installer
Uninstall & Reinstall of Visual Studio 2013 Ultimate, (manually removing anything with visual studio that was left over)
Manually turning on the add-on Visual Studio Tools for Office Design-Time Adapter for Excel
Installing VSTO by hand
Enabling Macros
Running VS as administrator
Uninstalling & Reinstalling Office 2013 Pro Plus OLP
I have made this change to excel:
Like I said, this problem occurs on TWO pc's. I have tried 2013 Visual Studio R1 and R2. Does anyone have any ideas?
Edit 3-1-2015
There is still no answer to this, I have tried target frameworks:
4.0
4.5
4.51
And Running as Administrator. Recently I upgraded to the CTP of Visual Studio 2015 Ultimate and the same problem exists.

Thanks for the reply.
The issue is not reproducible for me and I can confirm this not a known issue. We might need to do deeper troubleshooting at the repro machines.
Because of its complexity your question falls into the paid support category which requires a more in-depth level of support. If the support engineer determines that the issue is the result
of a bug the service request will be a no-charge case and you won't be charged. Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Sangeeth,MSFT

Publish cloud service fails from Visual Studio 2013 Update 4: Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.

I have a cloud service project with two roles (service and worker). In Visual Studio 2013 Update 4 when I choose "Publish..." from the "Solution Explorer", it opens "Microsoft Azure Activity Log" and quickly terminates.
Here the log:
9:43:47 AM - Applying Diagnostics extension.
9:44:09 AM - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
All works fine when uploading the package and updating from https://manage.windowsazure.com/. It only fails from within Visual Studio.
What can I do to get it working?

I have the same problem with our Azure project. Two web roles (service and worker). Just updated from SDK2.2 to SDK2.5 and Visual Studio 2013 Update 2 to Update 4. The main reason behind this was to move from log4net to WAD and in doing so, of course directly
move to the new diagnostics version.
Now, I get the same error message in Visual Studio:
11:45:24 - Checking for Remote Desktop certificate...
11:45:25 - Applying Diagnostics extension.
11:45:45 - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
With my small testing project - also two roles (service and worker) - everything is fine. However, I'm looking for a solution to make by existing production service working.
Also the test project shows no Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml,
but this is no problem - so what's the meaning of or solution to this error messages?
What I found so far:
I deployed the Azure project from the same development environment to another Azure test service: Deployment
showed no errors and the service is running fine! So the problem is not with the source, the development environment, library dependencies etc.
Trying Azure cmdlets for PowerShell also work fine for the new service and fails for the production service with almost the same error message:
Following http://blogs.msdn.com/b/kwill/archive/2014/12/02/windows-azure-diagnostics-upgrading-from-azure-sdk-2-4-to-azure-sdk-2-5.aspx
I tried:
PS C:\> Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config -ServiceName $service_name -Slot 'Staging' -Role $role_name
VERBOSE: Setting PaaSDiagnostics configuration for MyWebRole.
Set-AzureServiceDiagnosticsExtension : BadRequest : Published Asset Entry for Image
Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
At line:1 char:1
+ Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -Diagnostic ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-AzureServiceDiagnosticsExtension], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.CloudException,Microsoft.WindowsAzure.Commands.ServiceManagement.
Extensions.SetAzureServiceDiagnosticsExtensionCommand
The problem seems to be related to those service configuration parts in the cloud which are not replaced
by a new deployment... So what are possible reasons or fixes for this behaviour?
Best regards,
Andreas

Can't login to Azure from Visual Studio when creating new app.

Hi,
I already tried this at two different computers.
Install VS 2013
Get VS Update 2
Get VS Web Essentials
Get Azure SDK 2.3
Launch VS, Log-in with MSDN acc.
File-New Project - ASP.NET Web Application (pick MVC + Web API)
Use "Create remote resource - Web Site"
OK
Get asked for Azure login again (sigh..)..I log in.
Get error message: "Unable to create remote resource. 'One or more errors occured'" .. really? eh.. :D
Ok, so now i try the Manage Subscriptions link to check the azure account.
Nothing is there.so I guess I need to sign in again because my previous login got forgotten
I log inagain.
Get dialog with "The task argument contains no tasks. Parameter name: tasks"
Ok, no Azure for me I guess.
btw: I then logged into web Azure portal and noticed I am over the spending limit now, so my subscription was disabled, but if this is the case why I can't login to Azure from VS, then just tell me. Skip those unrelated (for me) error messages.
Screenshot:
https://www.dropbox.com/s/06olj5icdn9brbo/Screenshot%202014-04-12%2013.23.00.png

Hi,
Based on your description, it seems that your azure subscription was over the spending limit, about this account issue, I suggest you contact with azure support, it's the best choice for you. Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
About this incorrect error message, I suggest you submit this feedback at:
http://feedback.azure.com/forums/34192--general-feedback
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Upgrade from Visual Studio 2013 to Vs 2015 ends with unrelsoved external error

Hello,
I've installed VS 2015 CTP 6.
We used to work with with VS 2013.
When i try to compile our projects i get unresolved error for memset.
It is related to the change of the run time libs.
When i add vcruntime.lib as additional lib the error resolved.
it means that linker did no search at vcruntime.lib (probably look only at msvcrt.lib)
When i create a new project with VS2015 it worked(it was looking for vcruntime.lib).
I can add thos libs to all projects, but i thought(hoped :) ) there is a better way to do it.
thanks,
Lior

Hello liorb,
It seems your issue is related to C++ 2015 so I moved it here. If your VS2015 and VS2013 are both on the same machine I recommend you follow pvdg42's advice to report this issue to connect and share the link back to here. Maybe it is a problem with
this beta version.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't publish to Azure Cloud Service from Visual Studio 2013

I have a VS project that I upgraded from VS 2012 to VS 2013. I can run it locally, and had no issues publishing to Azure when I was using VS 2012. When I attempt to publish the upgraded app to an Azure Cloud Service that already exists, I am getting this
error. Note that I have checked the Service Config files and did a search on the entire solution and can not find any reference to "LocalStorage1" anywhere in the Project or Solution. I have another VS 20113 Project that publishes just fine
to Azure Cloud Service. Any ideas on how to fix this?
PUBLISH ERROR:
Windows Azure could not find the resource LocalStorage1 in the service package. To upgrade the deployment, you must add the resource. Otherwise, perform a new deployment.

That's actually what I meant in my first post. When publishing to a new service, it is fine, because the deployment does not have to compare what is already there (it is a new service, so nothing is there) and what is in your package. But while upgrading
a service, bunch of settings have to match between an existing service and the package you are trying to upload. So the error you got wasn't about you having something extra in your package, but having something extra in your existing service and missing in
the package you were uploading. Hope that helps.
Anyway, please move this question to cloud services forums (this one is for web sites only), as there are experts in that area and they might be able to help you better.
Thanks,
Petr

Deployment Error from Visual Studio 2013

I have been publishing my Azure web role and worker roles once or twice per week for the last year. 3 days ago I began getting this when publishing from VS:
8:44:19 AM - Checking for Remote Desktop certificate...
8:44:21 AM - Applying Diagnostics extension.
8:45:13 AM - The server encountered an internal error. Please retry the request.
Always the same three lines. I have tried 20x over the last 3 days. The only posts I can find that sound related deal with intermittent network issues. Since this has been going on for 3 days and I see no service issues listed on
http://azure.microsoft.com/en-us/status/, I do not think my problem is related to a network issue.
I am able to successfully package from VS, then publish via the Azure web portal.
Does anyone know how I can troubleshoot problems publishing? Thanks.

Sowmya,
I opened a support ticket but was told since it did not have to due with billing that they cannot help since I have not paid for technical support. Is there any way I can troubleshoot the problem that I am having? I generally solve things myself,
but since I am not getting any indication of what the problem is, I do not know where to look. Again I can manually package the solution, upload to BLOB storage, and update my cloud services through the control panel. So it is a fine workaround for now,
but it takes much longer than simply publishing from VS2013 which is what I had always done in the past. But now I get this "an internal error has occurred". It is hard to believe someone coded the system to even give such a useless message.
Any other options?
Thanks,
Denis

How can i see the output in Visual Studio 2013

Below is some code rearrange a array, i want to see the result after it's sorted so i add a loop of cout myself, But after runing the code, nothing happened, i didn't see any result from the widow before it closed, any help?
#include<iostream>
const int Red = 1, White = 2, Blue = 3;
void main()
int arr[] = { 1, 1, 2, 2, 1, 3, 1, 2, 3, 3, 1, 1, 3, 2, 1, 2, 1, 3, 2, 1, 1, 3, 2, 1, 3, 1, 3, 2, 2, 3, 3, 3, 1, 2, 1, 2, 1, 3, 1, 2, 3, 3, 1, 2, 1, 2, 1, 2, 2, 1 };
int n = sizeof(arr) / sizeof(int);
int Insert_Red = 0, Insert_White = 0, i;
for (int i = 0; i < n;i++)
if (arr[i]==White)
arr[i] = arr[Insert_White];
arr[Insert_White] = White;
Insert_White++;
if (arr[i]==Red)
arr[i] = arr[Insert_White];
arr[Insert_White] = arr[Insert_Red];
arr[Insert_Red] = Red;
Insert_Red++;
Insert_White++;
for (int i = 0; i < n; i++)
std::cout << arr[i];

i didn't see any result from the widow before it closed
Other choices which don't require any changes to your code:
(1) Set a breakpoint at the last closing brace (assuming that there isn't a
return statement before it - if there is then set the breakpoint on that
return statement).
(2) Put the cursor as described in (1) but instead of setting a breakpoint
use "Run To Cursor" from the menu that pops up when you right-click the
mouse. (Or use Ctrl-F10)
(3) Run your program in the IDE using Ctrl-F5 (Run Without Debugging)
Note that when using these methods, focus *may* remain on the IDE editor. If it
does then your console window with the output will be a background window. You
will then need to switch to it manually from the Taskbar, etc.
Non-related observation:
Standard C and C ++ require that the main() function return an int. e.g. -
int main()
Some compilers will accept void main() so as not to break old code, but new
code should always return an int.
- Wayne

Visual Studio 2013 slows down + crashes when using Source Control features.

I have spent two full days trying to resolve this issue but no luck so here we go,
I have created a project using Visual Studio Team Foundation Server plug-in in the past. Later on I switched to
Microsoft Git Provider.
Now when I connect to that project in the Team Explorer and double click on the solution to work on it locally it somehow changes the plug in to Microsoft Git Provider automatically and of course I can't
Commit/Commit and Push since I receive following error in the Team Explorer,
An error occurred. Detailed message: Failed to open directory 'C:/Users/.../AppData/Local/Application Data/'
Manually changing the plug-in to the Visual Studio Team Foundation Server
results in a broken Team Explorer as below,
With Settings leading to an empty pane, and also a warning in the Team Explorer's Changes page telling me the message below if I click on Pending Changes...
Microsoft Git Provider is not the current Source Control plug-in. Change Plug-in
And manually selecting the solution from Solution Explorer, right click and
Add Solution to Source Control, leads to never ending hour glass and (Not responding) visual studio.
New Projects
Creating a new project is straight forward, unless I "Add to Source Control" is checked. If so, again never ending process if Microsoft TFS plug-in is selected in the tools and eventually me Ending the Visual Studio task. And a VERY long process
(40+ mins) if I have chosen Microsoft Git but that finishes successfully rather.
New TFS project from Team Explorer
If I create a new project in my Online Web Studio
Click on Open with Visual Studio Link => Opens and connects to a my newly created TFS in team explorer.
Clicking new in Team Explorer under Solutions to create a new solution and bind it to this Repo
leads to straight crash of Visual Studio and restarting attempt of VS.
So I really can't use Source Control from visual studio other than cloning GitHub's existing repo's on Visual Studio and Committing my current Microsoft Git managed projects.
I have attempted
Repairing Visual Studio (no luck in results)
Devenv.exe /setup (no luck)
Trying to scrap the SCC info on my solution then at least it won't get picked up by source control then I can Check it in as a new project. (no luck and the solution picks the Microsoft Git upon opening it by clicking on the .sln file.) I have followed
these steps in this stack overflow answer.
And lots of mucking around like removing my workspaces almost Thousand times and putting them back, binding and etc.
I am really stuck on this and it's holding me back from staring a new project (which is problematic using Adding to Source Control) and unfortunately is dependent on the old project (which is developed under Visual Studio Team Foundation Server Plug-in which
is throwing tantrums)
Would like to hear you pro-s input on this
Using
Visual Studio 2013 Community edition (recently switched from Pro to Express to Community)
Windows 7 (64-bit)
Git tools
Git windows installation
Nuget Package manager
Visual Studio Log File
http://filesave.me/file/50620/log-txt.html
Mehradzie

Hi Mehradzie,
Based on the description, seems you're working with Git team project in Visual Studio Online(formerly Team Foundation Service). I'd like to know whether you mean Visual Studio Git command tool as the plug-in, and if you're trying to create solutions/projects
with Visual Studio and add them to the created Git team project.
From the screenshot, you're not connect to the Git team project by using Team Explorer. To work with Git team project locally, you can follow the instructions as below:
Connect to Git team project by using Team Explorer, after that you might install Git tools if you connect to the team project for the first time
Clone the remote Git repository to a local git repository and set the path to local git repository
Create a solution and select Git source control, also saved to the local path of the local git repository
Select your branch, and then click "Changes" and Commit the changes
Click "unsynced commits" and push the commit to remote git repository
You can also refer to the links below for more information about getting started with Git in Visual Studio Online.
http://www.visualstudio.com/en-us/get-started/share-your-code-in-git-vs.aspx
http://blogs.msdn.com/b/visualstudioalm/archive/2013/01/30/getting-started-with-git-in-visual-studio-and-team-foundation-service.aspx
If you still have any other concerns, please elaborate more details about your scenario. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Automatic Code generation from UML for C++ in Visual Studio 2013 Ultimate

Hi all,
I am using Visual Studio 2013 Ultimate to design UML diagrams and want to use the class diagram to generate C++ code,
however I found that there seems only support C# generation.
Is there any way to do the code generation (even round-trip engineering with C++/UML model) from Visual Studio 2013 Ultimate?
There is a way to do C++ code generation by customize the text template file right? but it is time consuming and we don't have much time to do it.:(
Thanks a lot!

Hello Grib,
>>is there anyway to integrate an STE code generator to Visual Studio 2013. I know there is EF5.x STE Generator but only for VS 2012.
Yes, you can.
Since the STEs are T4 template and you can just take template and code any changes or improvements you require yourselves! As you mentions, there is a EF5.x STE generator, you could download it and edit it. You could check this article:
Upgrading to EF6, we could see that from EF5 to EF6, the team moves classes to a new namespace, so we need to modify the T4 template to generate the new namespace.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error importing result file from Visual Studio Online load test - Incorrect Syntax near ')'

We are seeing the exact same issue as reported in:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/4a338992-1a46-47ae-9f13-10a53a6264b5/error-downloading-load-test-report-from-visual-studio-service-load-test-incorrect-syntax-near?forum=TFService#cb43383b-c60d-4dcc-a353-352ac6908b35
When clicking on the "Download report" after running a load test using Visual Studio Online an error occurs. The download completes, but the import fails at 15% with the following:
This is happening for 2 different users on 2 different systems.
Any assistance in resolving this would be greatly appreciated!
Let me know if additional information is needed.
Thanks!

Hi,
We are researching your issue. Please clarify my question with detailed information:
1. Do you get the error in your first post when you click ‘Download report’ after you run load test from
Visual Studio 2013 on
team foundation service?
2 You said that ‘I am trying to import the test results into a Visual Studio 2012 (Update 3) on-prem instance’, what and where is
your load test result repository? A SQL Server database or the default database:LoadTest2010 in SQL Express on the same machine with Visual Studio 2013?
3 Whether you specify the load test result repository under Load Test->Manage Test Controller?
4. What error do you get? Please provide us more detailed information about the error message or share us with a screenshot.
5 Whether you can run the load test successfully locally and get the load test result with the same load test result database?
6 You said that your co-worker can work fine. Please check whether your account has enough permissions for load test result database and download load test result from TFS to load test result database based on the account
permission of your co-work.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can I use ReportViewer 2010 from Visual Studio 2013

Similar Messages

Maybe you are looking for