Can i use same address pool for different remote access VPN tunnel groups and policy

Hi all,
i want to create a different remote access VPN profile in ASA. ihave one RA vpn already configured for some purpose.
can i use the same ip address pool used for the existing one for the new tunnel-group (to avoid add rotuing on internal devices for new pool) and its a temporary requirement)
thanks in advance
Shnail

Thanks Karsten..
but still i can have filtering right? iam planning to create a new group policy and tunnelgroup and use the existing pool for new RA and i have to do some filetring also. for the new RA i have to restrict access to a particualr server ,my existing RA have full access.
so iam planning to create new local usernames for the new RA and new group policy with vpn-filter value access-list to apply for that user as below, this will achive waht i need right??
access-list 15 extended permit tcp any host 192.168.205.134 eq 80
username test password password test
username test attributes
vpn-group-policy TEST
vpn-filter value 15
group-policy TEST internal
group-policy TEST attributes
dns-server value 192.168.200.16
vpn-filter value 15
vpn-tunnel-protocol IPSec
address-pools value existing-pool
tunnel-group RAVPN type ipsec-ra
tunnel-group RAVPN general-attributes
address-pool existing-pool
default-group-policy TEST
tunnel-group Payroll ipsec-attributes
pre-shared-key xxx

Similar Messages

Can we use same number range for different fields

can we use same number range for different fields. how can we see the number range defined for a particular field

Hai,
Yes you can have same number range for different fields by using the same domain to the data elements that are user to your two fields.
To see the range:
Go to SE11,Type table Name open it-->double click on the DataElement adjasent to the field name ,You will get Domian ,Double click on Domain You will get Domain.There See Value range option .Value range cam also be defined by Value Table which will also at the Doamin level.
<b>Reward points if it helps you.</b>
Regds,
Rama.Pammi

Can we use same Business Service for Sender and Receiver

Can we use same Business Service for Sender and Receiver

Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore

Find My Phone - can I use same user + password for 2 phones?

Just loaded the "Find My Phone" App on my new iPhone 4 and set it up. What a great tool for locating a lost iPhone. The only problem is that my wife and I have a joint mail and apple ID account.
So, my question is can I use Same user name (mail account) and password for TWO iPhone 4's (mine and wifes)? I assume that would work since each phone has a different serial number, and it seems to be ok when connected to my computer to sync each phone separately.
Any help would be appreciated, thanks.

My phone was stolen a few days ago. It must be flat by now, I have had it locked by my service provider, Find my Phone still works but says it's in Sydney, I live in Melbourne. Is this accurate? How can it still find the phone if it's not on?

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

Can we use same SOAP ACTION in different environments?

Hi All,
I have a doubt.
Can we use same SOAP Action URL in different environments i.e suppose say Quality, Production and Pre production.And the Target URL is different in both environments.
If yest what is the impact in different environment.

Hi ,
SOAP action is nothing but operation/method in webservice .
Usually at end system end as a good practice/std they will maintain the same soap action name in all their environments,but it's always better to cross check url and soap action with end system folks before configuring in PI .
We have faced an issue in production some time back ,at target system end they upgraded their server and used new wsdl which is almost similar to existing but one of the operation they duplicated by adding few addition fields but forgot to inform PI system.Though we are using new wsdl but pointed to old soap action .Interface got failed in PROD after investigation we come to know that we are using wrong soap action
Regards
Venkat

Message-Mapping: Use same RFC lookup for different target fields

Hello,
I need to apply an RFC Lookup which delivers a boolean flag back (true or false). This RFC lookup should be used for different target fields.
Is there a way to execute the RFC lookup just once and then store the result in an internediate variable that I can use for all futher checks for different target fields?
If this is not possible and I have to apply the RFC lookup for all necessary target fields is it then executed for each target field ? This is exactly what I want to avoid in order not to slow down performance.
The input parameter (=source field value) would be the same.
Thank you for your advice!

Exactly.
Here is a UDF example I have that you could adapt to your needs.
Set
public String setCounter(String a,String b,Container container){
/* Store values in global datacontainer
a: mapping value and return valueparameter
b: name for stored value parameter
GlobalContainer myGlobalContainer;
myGlobalContainer = container.getGlobalContainer();
myGlobalContainer.setParameter(b.toUpperCase(), a);
return a;
Get
public String getCounter(String a,Container container){
//write your code here
GlobalContainer gc = container.getGlobalContainer();
if (gc.getParameter(a) != null) {
return String.valueOf(gc.getParameter(a));
} else {
return "1";

Issues of using same enhancement set for different components

Hi experts,
I have an issue when using the same enhancement set(ZCRM_EHSET) for two different components IUICMD & IUICMRD. Component IUICMRD has two views IUICMRD/MainVS & IUICMRD/MeterReading and these views have been copied to Component IUICMD.
Now, i am getting the following error, when i try to access AccountSearch view of component IUICMD
Context initialization failed in view IUICMRD/MeterReading of UI Component IUICMD
An exception has occurredException Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=CL_IUICMD_BSPWDCOMPONENT_IMPL is not compatible, for the purposes of assignment, with target type \CLASS=CL_IUICMRD_BSPWDCOMPONENT_IMPL
Method: CL_IUICMRD_METERREADING_IMPL=>DO_INIT_CONTEXT
Source Text Row: 10
Let me know how i can solve this. Is there any precautions that i should have taken before using the same enhancement view for two different components.
Thanks in advance.......................
Regards,
Prabahar

Hi Bharathy,
Thank you for the reply which helped me to come close to the solution.
I hope you reply will solve the second part of my question where i get MOVE_CAST_ERROR.
My first Question is still unanswered and i request you to provide solution if you have any. I worked on CRM 4.0 and CRM 2007 is new to me.
My first question is below.
I have two components IUICMD & IUICMRD. I have enhanced 4 views in the first component IUICMD using enhancement set ZCRM_ENHSET. There is no problem with that. But when i try to use the same enhancement set ZCRM_ENHSET for enhancing the second component IUICMRD, it's enhanceable in enhancement set. But 2 views IUICRMD/Meterreading & IUICMRD/MainVS is also copied to first component and available as enhanceable views in First component.
Is it the std behaviour that views from one component is copied to other when you try to use the same enhancement set? Kindly let me know if you faced similar situation.
Best regards,
Prabahar

Can I use same result set for two queries?

Hi,
Can I use the same result set for two queries?
For example:
ResultSet rs = null;
rs = ps.executeQuery(query1);
while (rs.next()) {
rs = ps.executeQuery(query2);
while (rs.next()) {
Is it OK to use? or Is there any preformance issues?
Appreciate your help.
Thanks in advance.
Prasad Vagolu

Sure. You have a variable of ResultSet type. First you create a ResultSet and assign it to that variable. Then later you create another ResultSet and assign it to that same variable. Assigning an object reference to a variable takes essentially no time, and at any rate it isn't any faster to assign it to a different variable. Also, no matter whether you use one variable or two, you are still creating two ResultSets.
However, you really should be closing your ResultSets after you finish using them. That's nothing to do with the assigning-to-a-variable question.

Is it possible to use same sap script for different comp code with difflogo

I have 3 company codes. I need to use same sap script to all but each company code has different logo. I dnt want to go for 3 different sap script. Is it possible to change in coding
like this
If comp code = '100'
print ' logo1'
If comp code = '200'
print ' logo2'
If comp code = '300'
print ' logo3'
in same sapscript.If yes how ?

Hi,
Yes you can do it.
In Sap Script use:-
/: If Comp code='100'
INCLUDE ZHEX-LOGO100 OBJECT TEXT ID ST LANGUAGE EN
/:Elseif comp code = '200'
INCLUDE ZHEX-LOGO200 OBJECT TEXT ID ST LANGUAGE EN
/:Else
INCLUDE ZHEX-LOGO300 OBJECT TEXT ID ST
LANGUAGE EN
/:Endif
I hope this helps,
Regards
Raju Chitale

Can i use same certificate on 2 different CAS Server across sites

Hi All
I have a question I have been playing with for a few days,
I have the following setup,
2 sites connected via a VPN and a DAG configured between sites.
Site 1-Head Office
2 exchange 2010 servers,
1 running CAS and Mailbox (this server is entry point to all clients for owa etc.)
1 running Hub, CAS, Mailbox. (this is the main server and a DAG Member)
We have a UNC certificate associated with all records pointing to remote access and its installed on both servers.
** Everything in this site works fine.
** The AD DNS server does not have a zone for the public domain with all the external records only the .local domain. Planning to change this soon.
Site 2.
1 exchange 2010 servers,
1 running Hub, CAS, Mailbox. (this is the main server for this site, a DAG Member and no entry point at this time but we intend to use it for redundancy)
** Currently all BD are on server in site 1.
** The AD DNS server does not have a zone for the public domain with all the external records only the .local domain. Planning to change this soon.
My questions are as follows:
1      on site 2’s the cas server can I use the same certificate I’m using onsite 1. in other words all clients currently use mail.domain.com which has an IP pointing to site 1, can I use that same certificate in site 2 and associate
it with the CAS server there? (in the event of a failover I just change the records IP)
2      All smtp traffic come through site 1, when I test moving active databases to site 2, all email stay in the ques of exchange server in site one, they don’t get delivered. (I have not set AD replication through smtp so don’t know
if this is a factor)
3      When I do set the active databases to site 2, webmail and remote services stop working, I get the infamous error when logging onto webmail, service unavailable because it’s been moved. I have read a lot about this being an internal
external url issue.
All these issues im starting to think they all interlinked, and would like some help.
Cheers

Answers to your questions:
Yes. Understand that until you swap your external DNS so it points to Site 2, the mail.domain.com won't be accessed, but it will be there for when you want it to be.
AD replication is not the issue, so don't try to set it to use SMTP. If you have hub servers in both sites, your inbound Internet email should be delivered from the Site 1 hubs to the Site 2 hubs. We may need more information before we can give
you a good answer for this question. However, you may check the following TechNet article (and its links) for assistance.
http://technet.microsoft.com/en-us/library/aa998825(v=exchg.141).aspx
Web access requires that the CAS you connect to be either externally accessible and in the same site as your mailbox server, or that the CAS in the inaccessible Windows site needs to be configured as internal only and the accessible CAS needs to be configured
to proxy connections. For this, make sure you have followed the directions in the following TechNet article.
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
HTH ...

HT204053 Can I use one Apple ID for different itune stores in different regions?

I have itune store account in the UK. I can I use the same account to download an app. from a different store in a different region?

You cannot use other countries itunes stores.
Sorry

Can I use same connection pool on multiple web app?

Hi,
I have several web applications on my domain, and they all share the same database.
I am using TOMCAT 4, and I've wrote my own pool, but the problem is that there are also some other domains on the server, so I can't put my connection pool in the tomcat's share or common directory.
Right now, I am thinking of switching to use tomcat's datasource implementation. How do I configure the datasource so that all my web apps will use the same connection pool?
Thanks!

There's no actual webapp configuration when using Datasources... your Java code accesses the Datasource through JNDI:
     Connection con = null;
     String dataSourceName = "someDataSource"
     try {
          Hashtable parms = new Hashtable();
          parms.put(Context.INITIAL_CONTEXT_FACTORY, "com.ibm.ejs.ns.jndi.CNInitialContextFactory");
          Context ctx = new InitialContext(parms);
          javax.sql.DataSource ds = (javax.sql.DataSource)ctx.lookup(dataSourceName);
          con = ds.getConnection();
     } catch (NamingException e) {
          throw new SQLException("NamingException - " + e.toString());
     }If you want, you can keep the DataSource name in the application's ServletContext, so that you don't hard code it into your Java code.

Can we use same item category as a default in both scenarios(Sales and STO)

Dear Friends,
can any one help m for the following
shall we go with same item category as a default in both scenarios (Sales and STO) if yes please guid me how to go ahead.
Regards
Nischal

Hi,
I am bit confused here Sales item categories are different and STO is come in MM module & in mm item categories are diffrent.
Can you explain from which point of view you considering STO
kapil

How can we use same material code for two different sales area

Hello friendsu2026
Hope you all doing well
I am facing a problem and I will be thankful to all of you, for your suggestions
Issue:
I have a *material created in 3000/10/19 for domestic purpose *,now our company has decided to export it for that we have created a new sales are 3000/13/20 for export,we cannot create the salesa are as 3000/13/19 due to some company issues,
Is there any way how I can use the material already in 3000/10/19 into new sales area 3000/13/20.
Will common distribution channel and division concept will be applicable here
As the material is same,and we donu2019t want to go for any more new material code. *
Thanks
Siddharth Sharma

Hi Sharma,
when a material is used in domestic and exports.....i hope it should be seggreagated based on dist chnl.......but not division.
because material is Division specific. it can be there in only one division. like mother child relation.
that is the reason why...... it is maintained inside BASIC DATA...... but not in input screen while creating material master.[unlike dist chnl]
because a material can be in multiple dist chnl....but not multiple division.
I feel only alternative is creating new material if you are already decided to devide the sales by division for domestic and foriegn.
Purpose of common dist chnl/div is to maintain pricing/condition in one common whenever you change master data.......
hope this gives you the clarity
regards
Satya.SCM

Can i use same address pool for different remote access VPN tunnel groups and policy

Similar Messages

Maybe you are looking for