Can I use same IP to static to internal server from external dedicated ip?
M question is would it cause my problems if I had the outside interface external ip mapped to vlan2 with the same ip address as I am trying to create static route to my server? Or is this OK? Keep in mind these are imaginary ips.
I was trying to use this command but it was not letting me:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
Here is the front end of my config
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.333 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
Since you are using the outside interface ip address in your static PAT, you should use the keyword "interface" as follows:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
Similar Messages
-
Can i use same certificate on 2 different CAS Server across sites
Hi All
I have a question I have been playing with for a few days,
I have the following setup,
2 sites connected via a VPN and a DAG configured between sites.
Site 1-Head Office
2 exchange 2010 servers,
1 running CAS and Mailbox (this server is entry point to all clients for owa etc.)
1 running Hub, CAS, Mailbox. (this is the main server and a DAG Member)
We have a UNC certificate associated with all records pointing to remote access and its installed on both servers.
** Everything in this site works fine.
** The AD DNS server does not have a zone for the public domain with all the external records only the .local domain. Planning to change this soon.
Site 2.
1 exchange 2010 servers,
1 running Hub, CAS, Mailbox. (this is the main server for this site, a DAG Member and no entry point at this time but we intend to use it for redundancy)
** Currently all BD are on server in site 1.
** The AD DNS server does not have a zone for the public domain with all the external records only the .local domain. Planning to change this soon.
My questions are as follows:
1 on site 2’s the cas server can I use the same certificate I’m using onsite 1. in other words all clients currently use mail.domain.com which has an IP pointing to site 1, can I use that same certificate in site 2 and associate
it with the CAS server there? (in the event of a failover I just change the records IP)
2 All smtp traffic come through site 1, when I test moving active databases to site 2, all email stay in the ques of exchange server in site one, they don’t get delivered. (I have not set AD replication through smtp so don’t know
if this is a factor)
3 When I do set the active databases to site 2, webmail and remote services stop working, I get the infamous error when logging onto webmail, service unavailable because it’s been moved. I have read a lot about this being an internal
external url issue.
All these issues im starting to think they all interlinked, and would like some help.
CheersAnswers to your questions:
Yes. Understand that until you swap your external DNS so it points to Site 2, the mail.domain.com won't be accessed, but it will be there for when you want it to be.
AD replication is not the issue, so don't try to set it to use SMTP. If you have hub servers in both sites, your inbound Internet email should be delivered from the Site 1 hubs to the Site 2 hubs. We may need more information before we can give
you a good answer for this question. However, you may check the following TechNet article (and its links) for assistance.
http://technet.microsoft.com/en-us/library/aa998825(v=exchg.141).aspx
Web access requires that the CAS you connect to be either externally accessible and in the same site as your mailbox server, or that the CAS in the inaccessible Windows site needs to be configured as internal only and the accessible CAS needs to be configured
to proxy connections. For this, make sure you have followed the directions in the following TechNet article.
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
HTH ... -
How can I use same account in 2 iphone with diff contact list?
how can I use same account number but other all totally diff such as contact list, application, everything ..... I found that it's bad on IOS5.
when I used IOS4 .. old verison, I can keep my phone in diff data. Afte upgrade IOS 5, it's bad. Even take photo, it can not focus zoom in and out.how can I use same account number but other all totally diff such as contact list, application, everything ..... I found that it's bad on IOS5.
when I used IOS4 .. old verison, I can keep my phone in diff data. Afte upgrade IOS 5, it's bad. Even take photo, it can not focus zoom in and out. -
Can I use same Apple ID on my old and my new IPad....and if so, how do I name the new iPad. want to keep games on one iPad and use the other for emails etc. Many thanks
Hi,
Yes you can definitely use the same Apple ID regardless of how many apple devices you have. This way you can install the apps that you have already purchased.
It really does not matter what name your iPad is. You usually rename them under Settings>General>About>Name>
Just a note if you use the same icloud apple id as well, both devices will recieve the imessages and facetime calls.
Hope that helps! -
Find My Phone - can I use same user + password for 2 phones?
Just loaded the "Find My Phone" App on my new iPhone 4 and set it up. What a great tool for locating a lost iPhone. The only problem is that my wife and I have a joint mail and apple ID account.
So, my question is can I use Same user name (mail account) and password for TWO iPhone 4's (mine and wifes)? I assume that would work since each phone has a different serial number, and it seems to be ok when connected to my computer to sync each phone separately.
Any help would be appreciated, thanks.My phone was stolen a few days ago. It must be flat by now, I have had it locked by my service provider, Find my Phone still works but says it's in Sydney, I live in Melbourne. Is this accurate? How can it still find the phone if it's not on?
-
How can I use same iTunes on iPad 64GB and iPhone 5 16 GB memory
How can I use same iTunes account on iPad 64GB and iPhone 5 16 GB memory
Just connect them your computer. iTunes will treat each device separately. Or if you mean iTunes Store account, you can choose what you download to each device, either directly from the iTunes Store or in synching from iTunes on your computer, as long as you don't have automatic downloads turned on.
Regards.
Forum Tip: This forum is for questions about using iPads in companies and organizations. Questions about the general use of iPads will normally best be posted in the Using iPad forum. -
Can I use same account for android and PC and how ...
Can I use same account for android tablet and PC and how do I link both?
You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.
-
i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??
You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.
-
In Bte can i use same Product for 2 different process
in Bte can i use same Product for 2 different process
hi
as per i know yes but since there r two type of interface behaviour is defferent .
For
Publish & Subscribe interfaces
if any event occur in this type both the process can work simultaneously and they will not intervene each other
whereas in
Process interfaces
at an time any one process can be active.
Reward if usefull
Cheers
Snehi -
I have a windows vision for Adobe Creative Suite 4 Design Standard, Can I use same serial number with Mac?
Unfortunately, no. Creative Suite serial numbers are platform specific: Windows only or Mac only.
-
Can i use same apple id with 2 iphones
can i use same apple id with 2 iphones
Welcome to Apple Support Communities
Of course. Furthermore, you should do this if both phones are yours, so all your content will get synced and you can use all your purchases in both iPhones -
Can we use same Business Service for Sender and Receiver
Can we use same Business Service for Sender and Receiver
Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore -
Can we use same SOAP ACTION in different environments?
Hi All,
I have a doubt.
Can we use same SOAP Action URL in different environments i.e suppose say Quality, Production and Pre production.And the Target URL is different in both environments.
If yest what is the impact in different environment.Hi ,
SOAP action is nothing but operation/method in webservice .
Usually at end system end as a good practice/std they will maintain the same soap action name in all their environments,but it's always better to cross check url and soap action with end system folks before configuring in PI .
We have faced an issue in production some time back ,at target system end they upgraded their server and used new wsdl which is almost similar to existing but one of the operation they duplicated by adding few addition fields but forgot to inform PI system.Though we are using new wsdl but pointed to old soap action .Interface got failed in PROD after investigation we come to know that we are using wrong soap action
Regards
Venkat -
Why can someone use same icloud e-mail address as mine?
Why can someone use same icloud e-mail address as mine?
I Have found that the new facebook account has been set up in someone's name using my iclound e-mail.Do a backup.
Try System Preferences/iCloud and sign out. Then sign in with your new Apple ID. -
f i am using skype on my lap top should i download skype on the ipad, can i use same id and password??
Of course you must download Skyoe to any device you want to use it on. And the Skype name and password must be the same on each in order to access your account, contacts, etc.
Maybe you are looking for
-
Please help me out . . . I'm not a novice with either video production, fcp, or computers. I'm starting to wish I was back on my PC with premiere. First of all computer specs: G5 Quad 2.5ghz 4gb RAM approx 2tb spread across 5 HD's (internal and exter
-
FM to calculate discount based on Payment Terms (for Accounting document)
Hi- I am refering to Cash discount calculated on an accounting document. Discount is calculated based on Payment Terms. [ Baseline date: date from which discount period starts; Cash discount terms ; Cash discount percentage rates.] Is there a standar
-
Macbook Pro 2103 Keeps Dropping Wifi Everywhere
Hi! I have a 2013 Macbook Pro, OSX 10.9.4, that keeps dropping the wifi connection after minutes of nonuse. If I don't use it for two minutes, it drops. It does this no matter where I am, or whose wifi I am using. I tried changing channels on my r
-
Problem in displaying two fields in dropdown on selection screen
Hi All, I have a reqmt where i need to display the dropdown list for certain field. For this perticular fields there is a description attached to it. Please let me know teh way where i can display the field with description in dropdown. Like field1
-
When I open a new window (App etc) the windows already open disappear. How can I fix this ?