Can I use SCXI 1000 (110v US model) in 220V 50Hz country?

Somebody is selling SCXI 1000 with couple modules to me at a very good
price. However, it is a US model(110V) while in my region we use 220V
50Hz.  Can I use a fransformer to convert 220V to 110V and use
with this chassis? Are there any know issues? This will be used for
hobby  projects. Not a mission critical task
Thank you.
Message Edited by System on 08-20-2005 01:35 AM

just4fun,
Let me start my response by saying that most likely there should not be
any problems with using a transformer.  If I were you, I would
purchase a voltage adaptor that also changes the frequency of the power
supply from 50 Hz to 60 Hz.  Neglecting to change the frequency
could cause problems in some devices that have power supplies not
intended for 60Hz VDC power (this could lead to a noisy DC power line).
With that said,  the newer SCXI chassis can handle the different
voltage levels without a voltage adaptor, but you are supposed to
change the fuse inside the power supply to a lower amp fuse if you
switch from 110 to 220.  You should be able to determine what
types of power you can connect to the scxi-1000 (110V/60Hz or
220V/50Hz) by reading the labels on the back of the SCXI chassis.
If the labels on the back of the SCXI chassis make no sense, feel free
to reply with the info from the labels in an email and I can help you
decipher them.
I hope this helps,
Lorne Hengst
Application Engineer
National Instruments

Similar Messages

  • Do I need to configure something different,​when I'm using SCXI-1000,​1102 and 1180, together.?

    I am wanting to use SCXI-1000 with 2 modules SCXI-1102, but I also want to access the DAQ (ni pci 6035), through the SCXI-1180, to access some Digital I/O. How can I do that? What cable type between the SCXI and DAQ (6035) do I need to use? Do I need to configure something different? When I only configure the SCXI-1000 and SCXI-1102, I use the cable with 68 pins in both extremities and I don't have problems. But when inserting SCXI-1180, a following error message it is generated:
    "Dev1" digital lines 0, 1, 2 & 4 are in use by the connected SCXI subsystem.
    It happens when observing DIGITAL I/O in Test Panel in M A X.
    thanks
    Brás

    Thanks for the information! The examples sent me, were useful, but always I use Digital functions, just after I can't perform tests with SCXI, it doesn't respond, it becomes inactive until I reset Traditional NI-DAQ Devices.What can I do to have the VI attached running well? Can you help me?
    thanks
    José Brás
    Attachments:
    E_ser_dig_test.vi ‏109 KB

  • Can we use custom RFC in creating models in Visual composer??

    Dear Experts,
    Can we use custom RFC in creating models in Visual composer??
    If yes, kindly provide some documents or links which would guide me how to achieve it.
    Warm Regards
    Upendra Agrawal

    Hi,
    Yes,you can do it.
    Configure the rfc and use like others Standard BAPI procedure.
    [https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc/connectivity]
    Regards,
    Govindu

  • Can I use the iPhone 5s unlocked model A1533 for LG U  in South Korea

    Can I use the iPhone 5s unlocked model A1533 for LG U  in South Korea

    you might go here http://www.everymac.com/systems/apple/iphone/index-iphone-specs.html to see if the specs for the US phone are compatible with that required in KR

  • Can i use my AT&T 3G Ipad 2 in other country with a local carrier SIM?

    can i use my AT&T 3G Ipad 2 in other country with a local carrier SIM?

    Yes, as long as that country supports GSM networks... most do, verify yours.  ATT iPads are not locked.

  • Can I use iMessage for free with someone in a different country?

    Can I use iMessage for free with someone in a different country?

    Suzanne515 wrote:
    dj,
    That is good to know. Have you  ever turned off wi-fi and used your cellular data instead? I'd like to know if your carrier charges you for the iMessage? I will be travelling with a +44 number on my sim card (Teletial based in the Channel Islands I believe) and some places like South Korea & Japan charge about  $30USD/MB. ( or 19 GBP/MB). The devil is in the detail. 
    My carrier, 3, does not charge extra for cellular data.   I pay £34 per month for a cellular plan with unlimited data.  So, no, I do not get charged for sending iMessages whether I am on cellular data or wifi.  If I were to try to send an iMessage to an international number that did not belong to an Apple device, it would send as SMS and I am sure that standard international rates would apply.  Apple iMessage is a different protocol for users with an AppleID.  There is no way for the carrier to distinguish it from any other data traffic.

  • HT3529 can i use imessage to talk to someone in a different country?

    Can i use imessage to talk to someone in mexico if i live in the united states?

    If they have an i-Device or Mac with iMessage enabled, yes.
    Cheers,
    GB

  • Can't use my USB modem "HUAWEI model E156G" on my MACBook Pro

    I'm new to MAC (I used to be a windows user) and I'm a little bit frustrated for not being able to use my USB modem "Huawie E156G" for connecting my new MacBook Pro!
    I followed these steps:
    Got the USB modem drivers found on Huawei site that should support my USB modem model. there were 2 drivers, one for "Intel" and another one for "PowerPC" platforms
    First, I installed the "Intel" version succesfully. According to the steps, I tried to run the installed driver, but I got the following message:
                    "you cant open the app HuaweiDataCardApp because PowerPC app are no longer supported". 
    I repeated the installation procedure using the "PowerPC" version that finished succesfully (without removing the previous installed driver because dont know how to do that). I got the same message when running the driver application:
                     "you cant open the app HuaweiDataCardApp because PowerPC app are no longer supported".
    It would be much appreciated if anyone can help me
    Note: my MAC OS is MAC OS X Lion 10.7.2 (11C74), Processor Intel Core I5
    Thanks

    http://pasamio.com/2011/07/22/getting-your-huawei-modem-working-with-mac-os-x-li on/

  • Can I use my 27" late 2013 model iMac as a monitor for a gaming console through some sort of input cable?

    I just bought a 27" iMac for college and I was curious if it was possible for to use my iMac as a screen for a gaming console to forgo buying a TV.

    If the fuction is not addressed in this Apple article:
    http://support.apple.com/kb/HT3924
    you can't do it. Target Dispaly mode is a Mac-to-Mac function, and then only with late-model computers.

  • Can I use vouchers to purchase iTunes Store music in another country?

    Someone suggested that I can buy iTunes Store vouchers from eBay and then click "REDEEM" on iTunes Store to buy music EVEN IF I live in a country which does not have iTunes Store. But Apple is trying to make life really difficult for us. In the Q&A section of the iTunes website, Apple says:
    "Gift certificates and gift cards purchased on the iTunes Store are valid for use only in the country in which they were purchased. Gift certificates purchased in the United States may only be redeemed by residents of the United States."
    Not only that, those who have access to iTunes Store are making unreasonable profits from selling those vouchers. A US$15 iTunes Store voucher is sold for $18.
    Can someone advise what I should do?

    As I understand Apple's position - the update to the iPT is considered a major update - much like going from OSX 10.4 to 10.5 - hence the decision to require payment. I also understand that the iPT will work without the update - hence the device is still usable.
    I too am not a lawyer. To purchase via the legal outlets is the right thing to do and if I were a musician I would thank you for doing the right thing.
    To purchase a card via e-bay and complaining that there was a mark up - the mark up was not from Apple - it is from the person that is selling the card on e-bay. It may not be a violation of copyright - but it is possibly a violation of distribution rights.
    This discussion has been hashed out here in the forums many times so I will let you do a search if you want to know more about why Apple has to have different stores for different countries. If it were up to me the one-size-fits-all model would be my preference.
    MJ

  • Can i use a 3g/cellular wifi ipad mini in another country if i bought it in england?

    I would like to know if i was to buy a ipad mini which has 3g/ cellular wifi will it work in another country such as the US or Spain?

    You would have to ask the cellular carrier.

  • Using SCXI-1520 in Parallel Mode.

    Hi all,
    I am using SCXI-1000 chassis and PCI-1024E DAQ card.
    I want to use my SCXI-1520 in Parallel mode.
    Is there any other way to configure my 1520 in parallel mode other than directly connecting to DAQ board using SCXI-1180 feed through panel and SCXi-1302?
    Some of my friends are telling that there are some Patch files, through which we can use the scxi-1520 in parallel mode. Is it true? If it is true please give me how use the Patch files( or alternative solutions).
    Thanq
    Regards
    Preetam

    Preetam,
    As explained in the SCXI-1520 user manual, Traditional NI-DAQ does not support true parallel mode operation of the SCXI-1520. However, NI-DAQmx does. I would recommend installing NI-DAQ 7.2, which includes the latest version of both Traditional NI-DAQ and NI-DAQmx. Then you can use the NI-DAQmx driver to control your SCXI-1520 in parallel mode. To configure the SCXI-1520 in parallel mode with NI-DAQmx, simply select the Parallel Mode check box when setting up your chassis and modules in MAX. I hope this information helps.
    SCXI-1520 User Manual
    NI-DAQ 7.2 Download

  • Can I use an unlocked Sprint iPhone 5 (A1429 CDMA) on EE's 4G LTE network?

    I want to use my unlocked Sprint iPhone 5 (model# A1429 CDMA) when I travel in the UK. The only 4G LTE carrier is EE.
    They recommend you use an unlocked iPhone 5 (model# A1429 GSM), but I don't wish to purchase a new phone for such a short duration.
    So can I use a unlocked  iPhone 5 (model# A1429 CDMA) on EE's network or not?

    If you purchase the device unlocked, it can be used on any supported GSM carrier around the world.
    There are no guarantees with LTE.  It may work on their LTE network, it may not.

  • Can I use my original iphone 1 in foreign country?

    Can I use my original iphone 1 (cost $499) in foreign country?  Thanks.

    You can certainly use it.  You would need an international roaming plan.
    It is very unlikely that you can use a foreign SIM card.  Almost all, if not all, original iphones are carrier locked.
    Depending on in what country you reside, then your carrier may unlock it.  No U.S. carrier provides unlocking at all.

  • Can I connect a SCXI 1000 with PCI 6025 ?

    Can I connect a SCXI 1000 with PCI 6025 and use Virtual Banch with PCI 6025 ?

    Bley,
    Yes, you can use your PCI-6025E and SCXI-1000 with Virtual Bench. Do you have a more specific concern? Have you tried this setup, and it is not working?
    Spencer S.

Maybe you are looking for

  • Looking for a director consultant

    Hello there! I'm not sure if this is posted in the right place; if it's not, please don't flame me -- just let me know and I'll remove it. I am an academic, working with two colleagues to produce a DVD-Rom for the academic market (we have a publishin

  • Switching from PC to MAC -Will I have a problem with Lightroom?

    I am getting ready to switch from a PC to a MAC ( I think).  I know I will need new Lightroom software.  Other than that, will I have any problems.  Will it read my files automatically?  Sepcifically, will it maintain my key words, ratings, metadata,

  • Transfer iTunes library from a Dell PC to a new MacBook

    I just got a new MacBook about two months ago and I was wondering how I can transfer my entire iTunes library from my Dell to my MacBook.

  • How to enter the database in oracle 11g!!

    Hi all, I have installed Oracle 11g , and the SCOTT,SYS,SYSTEM account are locked ( I guess) as i am UNABLE TO ENTER THE DATABASE. When I open SQL+ , a cmd prompt will appear requesting username ( for which I tried SYS,SYSTEM,SCOTT) upon pressing ent

  • Why are files viewed in Bridge a lot brighter than Mac Finder window?

    Why do my camera raw files appear a lot brighter when viewed in Adobe Bridge than when viewed in the Mac Finder Window?  Like a lot brighter.  I'm not really sure which is the 'correct' brightness. Thanks!