Can I use Solution Builder on newly created Client?

Dear Experts,
I have an existing SAP system and I created new client via SCC4 without doing any client copy (means it's blank).
Can I logon to the newly created client via SAP* (since there's no other user id) and run Solution Builder to activate those SAP best practices Building Block? Will that affect other existing client (what I mean, will there be a cross-client customizing?
regards,
Abraham

Hi Abraham,
Can I logon to the newly created client via SAP* (since there's no other user id) and run Solution Builder to activate those SAP best practices Building Block? Will that affect other existing client (what I mean, will there be a cross-client customizing?
Yes, You can login to newly created client via SAP*. However, running or activation on empty client is not advisable.
Please copy the Newly created client from 000 or 001 and start the activation.
Refer to below link for SAP best practices Activation.
http://help.sap.com/saap/sap_bp/HCM_ERP605_US/html/installation_page_EN_US.htm
IMPLEMENT - Solution Builder Simplified path to activate SAP Best Practices.
Graphical scenario selection; Standard scope templates
http://help.sap.com/bp_dm603/BBlibrary/General/SAP_Best_Practices_overview_EN.ppt
Regards,
Sravanthi

Similar Messages

Photoshop CS6 bug? Can't use brush tool on newly created layer.

Has anyone encountered this problem before - I'm using a Wacom intuos 2 and working up some illustraitons, but whenever I create a new layer, the brush tool goes completely defunct and makes absolutely no marks on the document. I have gotten in the habit of just restarting Photoshop, and then it works. Am I accidently hitting some setting that I missed?
Thanks.

Mylenium might be correct on the Wacom driver, and PS CS 6 (if you have not installed the latest driver from Wacom, I would do that), but to check things out, I would Reset the Brush Tool's Options. Next, I would verify that I had created a New Layer (a "regular Layer," and not, say a Shapes Layer), then check that I had no Selections active in that regular Layer. Those can be common reasons why some Tools do not function, as they should.
I also have an Intuos 2, but have not hooked that up to my PS CS 6, so cannot directly comment on the drivers for it, with CS 6. Maybe I will have time to install the drivers, and hook that up to my laptop next week. Will report on how it works for me.
Good luck,
Hunt

HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal accou

Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal account?

You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

Can I use Photoshop Elements 13 to create HTML file?

Can I use Photoshop Elements 13 to create HTML file?

See Barbara's answer in your duplicated post: How can I save a Photoshop Elements 12 file as HTML?
No difference with PSE13.

Can I use Adobe Illustrator symbol to create a logo identity?

Is it allowed to use an Adobe Illustrator default symbol (which is normally supplied with the program in the symbols library) to create a logo for a non-for-profit organisation? Is there a contact in Adobe for such enquiries to be officially addressed?
Many thanks,

Thanks, Mylenium. Actually it is for a non-for-profit ogranisation and I am not charging anything for it, it is totally on a probono basis. Also the symbol has been modified from its original form in terms of colour.
Date: Wed, 15 Jul 2009 12:02:57 -0600
From: [email protected]
To:
Subject: Illustrator Can I use Adobe Illustrator symbol to create a logo identity?
Read the Adobe EULA, section 2.7. Basically it says (in human language) that you can use any of the files that come with Adobe programs in your own work as long as you don't sell them 1:1, i.e. it's okay to use a symbol as part of a logo, but not use a unmodified symbol alone and sell it to clients.
Mylenium
>

How can a use a itunes soft. and create a new id

how can a use a itunes soft. and create a new id itunes ?
and
we are update the lattest version in my iphone 3gs 16gb ?
how can backup my iphone and install other application ?
pls. reply me .
jayesh panchal

It is not possible to delete an apple id completely. You can only delete information like credit card, adress, name... To do this, go to iTunes Store, click on your email adress in the upper right corner and enter your password. Now you can manage your account.
An apple id without password is not possible.

How can I use slideshows that I have created in Aperture 3 (complete with captions and music tracks) in my DVD through iDVD version 7.1.2 ? iDVD Manuals that I have read seem to avoid explaining that export process. Any advice will be greatly appreciate

How can I use slideshows that I have created in Aperture 3 (complete with captions and music tracks) in my DVD through iDVD version 7.1.2 ? iDVD Manuals that I have read seem to avoid explaining that export process. I'm using Aperture 3, Mac OS X (10.7.5), on a Any advice will be greatly appreciated. Anthony Zasadney, Bolingbrook IL.

Export the slideshow from Aperture as a .mov file and import it into iDVD.

How to login with ddic in newly created client

dear all,
I am using SAP NETWEAVER 7.0 EHP1. I have created a client 400 in production and i want to login with ddic but i dont understand what will be the password for that.As for sap* is pass and for ddic=? . I also use 19920706 for ddic but still it is not allowing to log on.please tell me is it possible to log on with ddic in newly created client. and sap* is working but not ddic.
thanks

Dear Abhishek,
Before you proceed to Create Jobs & Positions first you check whether the Personnel Actions (PA40) is configured or not. Then after uploading the employeee master data you can proceed to other process.
if PA40 is not configured then Configure in SPRO using PA/PM/Customizing procudures/ Infotype Menus etc. You can also maintain user profile using Tcode. SU3.
All the best.
Rgds,
Vikrant

Default username and password for newly created client in minisap

Hi all,
I am using the free SAP minisap provided by SAP. In this system i tried to create a user from tcode scc4 . when i try to login to the new client with the username SAP* and password minisap i am not able to login. What will be the default username and password for the newly created client in minisap.

In the new installation
The parameter
login/no_automatic_user_sapstar is set to " 1"
You create the parameter with value "0" & restart application server.
& Try to login into New client as SAP* with password "pass" - ( For a Standard System) - I don't what will be the default password in minisap.
Rgds
PR

How can I use XMLBeans in a Web Services client?

How can I use XMLBeans in a standalone Java client with a Web Service?
I posted the message below earlier in the year, but have not yet been successful
in my
attempts.
regards
Eddie
Hi,
I'm trying to using XMLBeans to send a document to a web service from a standalone
Java client. I'm using the PurchaseOrder (easypo) example document, and the service
expects a parameter of type PurchaseOrderDocument. The client proxy class generated
by WebLogic Workshop, however, expects to send a parameter of type PurchaseOrder.
In the client, I can instantiate a PurchaseOrderDocument, and then obtain a PurchaseOrder
(e.g. pod.getPurchaseOrder() ), but the returned class is not compatible with
the PurchaseOrder type that the client proxy expects.
In a previous attempt (not using Workshop), the client would not compile because
it expected to send a non-abstract class with a public default constructor (presumably
a JAX-RPC requirement), and XMLBeans had generated an interface.
Any help would be greatly appreciated!
thanks & regards
Eddie

I have been experiencing similar problems with the HTML Editor and have managed to find an answer that should start to answer some of my questions. The Apex HTML Editor Standard is actually an HTML editor called FCKeditor. The FCKeditor has a Javascript API that can be found at http://docs.fckeditor.net/FCKeditor_2.x/Developers_Guide/JavaScript_API. Unfortuately this doesn't seem to give the whole answer and I found more at http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:49607.
I needed to get the text entered within my html editor standard (e.g. P1_MYTEXT) and use it within my javascript function. I did this by using the following script
<script language="JavaScript" type="text/javascript">
function showtext(){
var oEditor = FCKeditorAPI.GetInstance('P1_MYTEXT');
var editortext = escape(oEditor.GetXHTML(oEditor.FormatOutput));
alert(editortext);
</script>
Hope this helps.
Matthew

To offer integrated forms, so like Jotform, there are templates that can be used and upload options to FTP client as well as other built in widgets.

To offer integrated forms, so like Jotform, there are templates that can be used and upload options to FTP client as well as other built in widgets.

What you need is merged help.
You generate a parent and all the child projects. You always install the parent and then whichever child projects you require. The TOC, search and index automatically adjust. See the pages on my site.
Note though that many people take another view to your Product Development. Show all the help and then people see information about something and realise they need it!
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Can I use action build to fade one table row as I move to the next row in the table?

I have built a table with 6 rows. Right now,I am building the table row by row when I play the slide. Is there a way to fade or dissolve one row when I move to the next row in the table? I want to be able to de-emphasize the row I just discussed when I move to the next row in the table. I can fade the entire table by invoking that action but I do not seem to be able to use this action one row at a time. Thanks for your comments and assistance.

you will have to use a workaround to get the exact effect you described
create a table with out any text
use text tool to add text and position in each table cell
select the text boxes( command click) in the first row and group them (arrange > group)
use a, build in, to display text and then a, build out, to remove it
repeat the above for the other rows

How can I use cutom build icons in labview as a switch ?

I have two questions:
I am trying to make a user interface, using custom-build icons.
-How can I load/copy my icons into labview?
What would be the best sollution for the usibility of the icons:
-should I try to use the icon as a new overlay for labviews excisting push-buttons?
-or... make a shape(icon) a clickable item/button.
Either way, I do not have a clue how to accomplish this task.
Every comment on this item is appreciated.
Kind regards,
Ronald (The Netherlands)

Hello Ronald,
here is a link which does engage with this topic.
http://zone.ni.com/reference/en-XX/help/lv/71/lvhelp/Impt_Graph_in_Bool_Contrl/
Regards ThomasD

How can I protect formulae in a newly created spreadsheet without locking the whole sheet ?

How can I protect formulae from being overwritten on a newly created spreadsheet without locking the whole sheet ?

Olly,
I'll be picky here on nomenclature ;-)
Tables and other Obects can be locked, but Sheets can't be locked.
If you wish to shield some parts of your content from accidental modification, arrange your layout to put that sensitive content in tables separate from the tables that need to be accessed, and lock the sensitive ones. It's also possible, but rather clunky, to place shields over the sensitive area. A shield can be made by Inserting a Shape and positioning the shape over the sensitive area. With the shape selected, go to the Graphics Inpector and set the Opacity of the shape to zero. You will then be able to see through the shape but will no be able to Click through it to get at the cells below. This method is inconvenient because you have to worry about keeping the shape aligned with the table should the table need to change size or shape.
Jerry

Can I use conditional build tags in CSS files?

I am using RoboHelp X5.0.2 and building CHM files.
I use conditional build tags to output different Help files
for the different products we have that all have similarities.
In the past I have setup the CSS file to show headers, links
etc in the color scheme we use to keep the look and feel of our
branding. One of the new products uses a different branding color
scheme.
I was wondering if there is a way I can use conditional build
tags in the CSS file so that when I build one type of help it uses
header in one color and when I build another help it uses a
different header color. Does anyone know how to do this? If it is
not possible in my current version, is it possible in the latest
version of Robohelp?

[WORKAROUND ALERT IN X502]
For .chm output, you could:
1. In the Topics pane, select all the topics (click on one
topic and press Ctrl+A).
2. Right click in the highlighted area and select Properties.
3. In the Appearance tab, select the different style sheet.
4. Click Save.
5. Generate the .chm file.
6. (optional) Repeat steps 1-4 to revert to previous style
sheet setting.
Good luck,
Leon

Can I use Solution Builder on newly created Client?

Similar Messages

Maybe you are looking for