Can I use sound blaster for win 2003 serv

I have a dell poweredge 800 xeon intel. I install win server 2003. Just wondering are there any sound card that compatable for my server.

Yes ! I install a SB Li've 5. over W2003 ST. Only use the WINXP Drivers for this ! The EAX and all programs will function very well.

Similar Messages

Oracle 9i release 2 for Win 2003 Server 32 bit

From the Oracle download site, do I need to download Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP 32 bit before administering the Release 2 for Win 2003 Server. (approx. 180 Meg)

Interesting. I've been using APEX 3.2 with Firefox 3.5 for several months now without any issues and I know several other developers doing the same. Can you test it from another client machine to see if it's something with the PC or the install of Firefox? You might also try [a href="http://portableapps.com/apps/internet/firefox_portable"]Firefox 3.5 Portable[a], as it will basically give you a clean, fresh install of 3.5 without uninstalling your current 3.5. Just make sure you close all instances of Firefox before you start up the portable one.
On a totally unrelated note, just wanted to make sure you know the 9.2 is no longer a supported database (unless you pay for extended support) and the upcoming 4.0 release of APEX will not work with 9.2 at all.
Tyler Muth
http://tylermuth.wordpress.com

Can i use vps's for linux edge server's???

I can stream to edge server on fme------>windows7-edge ------> origin-linux-dedicated--and or--vps------>website works...
but cant do fme---->linix-edge-vps------>linux-orgin-dedicated--or----vps------>website Doesnt work
nore can i do fme------>linux-edge-vps--->windows7-origin---->website Doesnt work
All using latest centos tried and same results with ununtu
so am i out of luck for using vps's?
any help would be great thanks

yeah no that doesn't work but get this...
when i publish to windows edge server the signal gets sent to origin vps then to viewers...
but if i make windows origin and vps edge server is does not work dont understand why this is happening
Date: Wed, 22 Dec 2010 01:45:19 -0700
From: [email protected]
To: [email protected]
Subject: can i use vps's for linux edge server's???
I agree load balancing part but load balancing should be done in context of subscribing and not in terms of publishing. You can do failover in context of publishing using Multi-point publish.
If you publish directly to origin and then introduce edge servers for subscribing do you still face issue.
I mean if you set up your linux VPS as edge and then subscriber goes through that edge - say like rtmp://linuxedge/?rtmp://origin/live - does this work?
Can you try that out and let me know.
>

Help me! can not using JDBC driver for MS SQL server

I can test sucess in connection, but create EJB when have follow error.
04/05/19 12:23:04 SQL error: No suitable driver
04/05/19 12:23:10 Error creating table: No suitable driver
500 Internal Server Error
java.lang.NoClassDefFoundError: oracle/jbo/html/HtmlServices
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:182)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)

HI All,
I am using JDBC driver to pull data from MS SQL Server
2000 for my application Liaison Content Exchange, and
which only accepts JDBC drivers to talk to databases.
I dowloaded the driver from Microsoft website, and had
a successful installation.What do you call "a successful installation"? Where was the JAR file places?
But the application ask me for Driver Name, Class, URL, Time out and Data Source.What application do you mean? Liaison Content Exchange? I'm not familiar with that product.
By default no driver is available in the drop down combo box. After using
"com.microsoft.jdbcx.sqlserver.SQLServerDataSource" as
class and
jdbc:microsoft:sqlserver://192.168.17.2:1433; as url,
the application throw me a error which states "Unable
to instantiate an instance of the application driver"Sounds like it could be one of several things:
(1) The JDBC JAR is not in the CLASSPATH where Liaison Content Exchange expects to find it.
(2) You need to do something else to tell Liaison Content Exchange more information to define the data source.
(3) The URL might be incorrect. Only you can know if the IP address of the host is correct. You don't supply a database name - perhaps you should. Are you sure that 1433 is the correct port number? I know that's true for SQL Server 7.0, but I remember that the default was changed to something else for SQL Server 2000. Ask your database admin what port this listener is assigned to for SQL Server 2000.
(4) You might want to append ";selectmethod=cursor" to the end of your URL. (See the docs for this.)
(5) Make sure you can connect to the database with something other than Java (e.g., the M$ SQL Server client).
. I am not able to trouble shoot this problem, any one
pls help me ASAP at [email protected]
Thx.Bad idea to post an e-mail address. You're not supposed to communicate outside the forum. it's against the guidelines for using the forum.

SoundMax Integrated Digital HD Audio for Win 2003 Server x64 bits

Can anyone give me a link to the audio drivers?
i can't find them!!
Thanx
(mod edit: corrected typo in title)

lenovo doesn't offer a 64-bit XP/2003 driver for the soundmax card. the only one available is linked below. it might be worth trying but it's difficult to say whether or not it will install. you may have to unpack the executable and manually install the driver.
http://www-307.ibm.com/pc/support/site.wss/MIGR-67816.html
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Can't install Sound Blaster live 5.1 on Windows XP machine

Hi,
I've been using?Sound Blaster Li've! Platinum 5. on my pc running Win ME for years. I've just formatted the PC and installed Windows XP Professional on it and now when I try to install Sound Blaster from the original installation CD, I get the error "Sound blaster li've 5. is incompatible with this version of windows". It still allows me to install but then I get all sorts of errors when playing back audio files etc.
I've now?re-installed XP but obviously can't use Sound Blaster and I would really like to!
I'm a musician and not?technically minded?at all so any ideas would be greatly appreciated.
Thanks - Abrie

>Re: Can't install Sound Blaster li've 5. on Windows XP machine: Hi Abrie,
Is your sound card was preinstalled or was it come in a retail box?
If it is a retail version then you get the driver and applications (Win XP Professional 64 bit) from the below link.
http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=572 &prodName=Li've! Platinum 5.&subCatName=Li've!&CatName=Sound+Blaster&VARSET= prodfaq:PRODFAQ_572,VARSET=CategoryID:
Please copy the entire tag (entire 2 lines)?above and paste it in the web browser and hit entre.
Please let me know whether it works fine or not.
Cheers
AW

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Trying to configure a Win 2003 Server to use TLS server authentication . . .

I am trying to
configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
Method 2: By using the Certificate Request Wizard
The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
You want to request a certificate from an Enterprise Certification Authority.
You want to request a certificate that is based on a template where the subject name is generated by Windows.
You want to obtain a certificate that does not require administrator approval before the certificate is issued.
To obtain a certificate, follow these steps:
Click Start, click Run, type mmc, and then click OK.
On the File menu, click Add/Remove Snap-in.
Click Add, click Certificates, and then click Add.
Click Computer account, and then click Next.
If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
computer, and then type the name of that remote computer in the Another computer box.
Click Finish.
In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
Snap-in dialog box.
Under Console Root, click Certificates (Local Computer).
Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
On the View menu, click Options.
In the View Options dialog box, click Certificate purpose, and then click OK.
In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
In the Certificate Request Wizard that starts, click Next.
In the Certificate types list, click Server Authentication, click to select the Advanced check box,
and then click Next.
In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
I get as far as step 11 and I get the error message:-
The wizard cannot be started because of one or more of the following conditions:
- There are no trusted certification authorities (CAs) available.
- You do not have the permissions to request certificates from the available CAs.
- The available CAs issue certificates for which you do not have permissions.
This is covered in KB 927066 – see below:-
To resolve the problem, follow these steps:
Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
To do this, follow these steps:
Click Start, click Run,
type Dsa.msc, and then click OK.
In the left pane, click the Users container.
Verify that the CERTSVC_DCOM_ACCESS group is in the right
pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
Domain Users
Domain Computers
If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4.
Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
do not have sufficient DCOM permissions.
Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
authority.
Click Start, point to Program,
point to Administrative Tools, and then click Component Services.
Expand the Component Services node.
Expand the Computers node.
Right-click the My Computer node, and
then click Properties.
Click the COM Security tab.
Under Access Permission, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
Remote Access permissions, and then click Cancel.
Under Launch and Activation Permissions, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
Remote Activationpermissions, and then click Cancel.
Click Cancel, and then close the Component
Services console.
Settings may be incorrect if any one of the following conditions is true:
The CERTSVC_DCOM_ACCESS group does not exist.
The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
net stop certsvc
net start certsvc
Repeat steps 1 through 3 to verify that all the settings are correct.
Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
The only part of the above instructions which I have not been able to complete is:-
“you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.

Hi Nick,
Have you successfully set up an enterprise CA?
If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
Best Regards,
Amy

User Unable to RDP in Win 2008R2 Due to Multiple Group Membership But Can RDP in Win 2003 Server

We have built a new application server with Windows 2008R2 where set of users are local admin (application owners) and we have same kind of application server
in Windows 2003 SP2 with same users as local admin.
Now in Windows 2008R2 servers these local admins are unable
to RDP and get ACCESS
DENIED whenever user tries to login but can login successfully in 2003 server.
Now, strange case is, I found these admin users group membership with more than 600 groups and they are able to login win 2008 server as well if I remove their
group membership to a minimum level say around 300.
This is so confusing for me as user can login in WIn 2003 server with highest group membership but not in WIn 2008.
We have applied Maxtoken registry also through GPO.
Any idea what are we missing here.

This has nothing to do with Directory Services so I will move to the General forum.
One thing to look at is to make sure that you have RDP enabled on these new 2012 servers.
http://winplat.net/post/2012/07/16/How-to-enable-Remote-Desktop-on-Windows-%E2%80%988%E2%80%99.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Can i use create function for MSSql scalar and table valude function.

Hi,
1) Can i use create function for MSSql scalar and table valued function?
2) How many type of user defined function are there in oracle 11g express?
3) And can i reture any "type" form user defined function?
yourse sincerely

944768 wrote:
Q1)That means even if i return predefined types like integer, varchar2 then also PGA is used ?The data type does not determine where the variable is stored. A string (called a varchar2 in Oracle) can be stored in stack space, heap space, on disk, in a memory mapped file, in a shared memory, in an atom table, etc.
It is the who and what is defining and using that string, that determines where and how it is stored.
The Oracle sever supports 2 languages in PL/SQL. The PL (Programming Logic) language is a procedural/declarative language. It is NOT SQL. SQL is integrated with it. The PL/SQL engine uses private process memory (PGA). So PL/SQL variables exist in the PGA (but there are exceptions such as LOBs).
Q2) So please suggest me solution in oracle.Sounds to me you are looking at how to implement a T-SQL style function as an Oracle function, and once implemented, do joins on the function.
Do not use PL/SQL in SQL in place of a SQL select. It is not T-SQL.
One cannot use PL/SQL to create functions along the style of T-SQL, where the function executes a SQL using some conditional logic, and then return as if the function was a native SQL select.
T-SQL is an extension to the SQL language - making it a hybrid and very impure language implementation. PL is based on ADA - part of the Pascal family of languages. The E-SQL (embedded SQL) approach used in languages like C/C++, Cobol and Ada, has been transparently done in PL/SQL. You can write and mix PL code and variables with SQL code. And the PL/SQL engine figures out how to make the call from the PL/SQL engine to the SQL engine.
But PL/SQL is not "part" of the SQL language and does not "extend" the SQL language in a T-SQL fashion.
So you need to check your SQL-Server preconcepts in at the door, as they are not only irrelevant in Oracle, they are WRONG in Oracle.
The correct way in Oracle, in a nutshell - Use the SQL language to do data processing. Use PL/SQL to manage conditional process flow and the handling of errors.

Need download link for for Win 2003 R2 enterprise 32 ISO

Hey,
I am looking for ISO for Win 2003 R2 enterprise 32..
Its not even available on volume licensing site any more.
Thanks

check out this link:
Windows Server 2003 Service Pack 2 (32-bit x86) - ISO-9660 CD Image File
http://www.microsoft.com/en-sg/download/details.aspx?id=21700
Every second counts..make use of it.

I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time .

CAN'T DOWNLOAD SOUND BLASTER

CAN SOMEBODY HELP ME TO DOWNLOAD THE SOFTWARE OF SOUND BLASTER LIVE 5. I LOST INSTALLATION'S CD...... THANKS.

>Re: Can't install Sound Blaster li've 5. on Windows XP machine: Hi Abrie,
Is your sound card was preinstalled or was it come in a retail box?
If it is a retail version then you get the driver and applications (Win XP Professional 64 bit) from the below link.
http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=572 &prodName=Li've! Platinum 5.&subCatName=Li've!&CatName=Sound+Blaster&VARSET= prodfaq:PRODFAQ_572,VARSET=CategoryID:
Please copy the entire tag (entire 2 lines)?above and paste it in the web browser and hit entre.
Please let me know whether it works fine or not.
Cheers
AW

Bus-Master DMA using Common Buffer for Win XP driver

Explain the basic steps required for Bus-Master DMA using Common Buffer for Win XP driver.Explain the device description struture "MaximumLength" field usage also.Explain the usage of addresses returned by
AllocateCommonBuffer. Provide sample code if any.

amar wrote:
> Explain the basic steps required for Bus-Master DMA using Common
> Buffer for Win XP driver.Explain the device description struture
> "MaximumLength" field usage also.Explain the usage of addresses
> returned by
> AllocateCommonBuffer. Provide sample code if any.
Sounds like a task assignment in high school to me.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Can I use one account for both my labtop and my ho...

can I use one account for both my labtop and my home computer?
Solved!
Go to Solution.

Softthunder wrote:
can I use one account for both my labtop and my home computer?
Hello,
Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Can I use sound blaster for win 2003 serv

Similar Messages

Maybe you are looking for