Can I use the battery from 4gb Zen Micro Photo in the 8gb Zen Micro Pho

Can I use the 3.7V Li-ion Polymer Battery 680mAh in my 8gb Zen Microphoto? The 8gb came with a 3.7V Lithium Ion Battery 830mAh.

rrochlis,
The mAh is a measure of a battery's total capacity. The higher the number (ex. 600 mAh, ,500 mAh) the more charge the battery can hold and usually, the longer a battery will last under a certain load. If you're going to use a lower mAh battery, you will get shorter playback time.
Jason

Similar Messages

How can I remove the battery from my Iphone and Ipads?

How can I remove the battery from my iphone and ipad?

The iPhone and iPad do not have user serviceable batteries. Battery replacement is handled by Apple. Make an appointment at the Genius Bar if battery replacement is required.

How do i pull the battery from an iphone 5s

How do i pull the battery from an iphone 5s

If you open the phone, you will not get any support from Apple or the users at this site. You will not be able to get the phone serviced or replaced.
A google search will get you the answer you need.
~Lyssa

Can I use my iPad Mini while plugged in thus keeping the battery at 100%?

Can I use my iPad Mini while plugged in thus keeping the battery at 100%?
Or must I use it on battery all the time?

Copied from Texas Mac Man ...
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

I can no longer burn CDs from my iTunes (Macintosh) playlists. The format shows up as m4a - which never used to happen. Can you help? Thanks.

I can no longer burn CDs from my iTunes (Macintosh) playlists. The songs are now formatted as m4a, which might be making them unreadable by my CDs, although this never used to happen before. Can you help? Thanks very much.

After you select Burn, you need to select AudioCD in the pop-up window.

I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook?

I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook? The hard drive I am planning to install is a WD Scorpio Black 500GB SATA 2.5'' internal hard drive.

Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck

Can I use Final Cut Studio 3 - notably FCP 7 - on the lastest MacBook Pro (non Retina) (Z0MV-27-4GB-512-HRA Apple 15" MacBook Pro/2.7GHz Quadcore Intel Core i7/8 GB) running OS 10.8?

Can I use Final Cut Studio 3 - notably FCP 7 - on the lastest MacBook Pro (non Retina) (Z0MV-27-4GB-512-HRA Apple 15" MacBook Pro/2.7GHz Quadcore Intel Core i7/8 GB) running OS 10.8? If not, is there a work-around if I have to revisit work done in FCS 3?

I have it running on the latest NON-Retina MBP. And a good friend of mine has it running on his Retina model. Works fine.
Henry English wrote:
What if I have to revisit any one of them? What if I try FCP X and find I prefer FCS 3?
If you need to revisit them...that's why you install FCS3. That's really the only reason I have that on my system, to revisit old projects, and to deal with clients who still use FCP 7.
You really should look at moving on though...not sticking with FCP7. It's 4 years old...two years since it was EOL. Adobe Premiere Pro CC is a very good FCP replacement...although I don't like their "rental" method of paying a subscription to use it. Or you can buy Adobe CS6...but that just lacks enough to make it not quite tempting for me. Premiere CC is spot on...but **** if I don't hate that subscription model. But there's also Avid Media Composer. But that doesn't do a lot of things that I used FCP and Adobe for...

Got a new iPhone that I've been using for about a month now, so the question is how can I get the pictures from my old iPhone and keep the pictures I have on the new iPhone?

Got a new iPhone that I've been using for about a month now, so the question is how can I get the pictures from my old iPhone and keep the pictures I have on the new iPhone?

Connect old iPhone to computer and save the pictures on computer.
Connect new iPhone and sync the pictures to your new iPhone.

Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

Seems no one care about us .no one replied till no@!!!!@ strange

How can I stop my battery from running out in my in my iphone 5 with the new i0s7

how can I stop my battery from running at a super fast rate on my in my iphone 5 with the new i0s7, ever since I upgraded I am needing to charge up at least 3 times a day.

https://discussions.apple.com/message/23361957#23361957

Can I use my 3G from my Iphone with a hotspot to go on the internet with my Ipad (no 3G)?

Can I use my 3G from my Iphone with a hotspot to go on the internet with my Ipad (no 3G)?

That is called "tethering" and you would have to contact your wireless carrier to set it up and find out the costs.
Hope this helps

Can I use Apple store from a country other than the country I live in. Example: I live in USA and want to use Apple store in Thailand to buy and download thai content.

Can I use Apple store from a country other than the country I live in. Example: I live in USA and want to use Apple store in Thailand to buy and download thai content.

No, you can only buy content from your own country's store - to be able to buy form another store you need a valid billing address in that country and be in that country when buying from it. You can try requesting that the content that you want be added to the US store, but ultimately it's the content providers (record companies, film studios etc) that will have to grant Apple a license to sell it there : http://www.apple.com/feedback/itunes.html

Is there a way of stopping the battery from charging?

Dear Apple Community,
Recently I installed iStat Menus and found that, over the course of this year, my Macbook's charging capacity has dropped 5%. I know this isn't a massive number, but battery performance has become a concern for me. I use my Macbook as a desktop replacement, on the main. It's sitting on a mStand, connected to a large monitor on my desk. I use my Macbook to play games, surf the internet, do work and all that good stuff - basically, I use it for everything. I rarely use the Macbook without it being plugged in. I read on the Apple website that they do not recommend leaving the Macbook on charge permanently and that I should use it on battery at least one a month. As I use my Macbook as a desktop replacement, I don't actually have a lot of opportunity to do this.
My question to you, the community, is: is there a way of stopping the battery from charging, either with the use of an app or a physical device? Ideally, I would love to have my power plugged in BUT only used when the battery drops below 10%. Is this possible with an app?
On the other hand, am I just worrying about nothing? Will my battery be damaged further if I leave the Macbook charging permanently?
Thanks for your help!
Jeremy Reid

Ideally, I would love to have my power plugged in BUT only used when the battery drops below 10%. Is this possible with an app?
The charging characteristics are handled in firmware. There is no app that would be able to do this. You actually would not want to do this anyway. Regularly discharging your battery to 10% will greatly decrease the life of your battery. While it is true that you should not use your system exclusively plugged in, allowing it to run on battery a few hours a week should be fine. Letting the battery regularly run down to (or below) 10% will cause you to use up cycles more quickly than is necessary (thereby reducing the life of your battery). It's really a only a matter of disconnecting your Magsafe connector once in a while.
Leaving it plugged in does not result in it being charged "permanently". It will charge until it is full and then charging will stop. It will only begin recharging when it reaches about 95%.

How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.

How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.
I tried to use the attached command through TERMINAL :
sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps WHERE title='Help';" && killall Dock
sqlite3: Error: too many options: "DELETE from apps WHERE title='Help';"
Use -help for a list of options.
But i didn't work as I got the above error message.
best regards
Jeroen

I'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job). What I think we need is the Education Volume Purchasing Program
http://www.apple.com/education/volume-purchase-program/faq.html
Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software. (The AppStore icons still show as needing the updates, and the version info reports the old version.) The documentation is also vague about which AppleID to use in which circumstance. I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers. When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install. We did! But they appear to have no way to enforce it.
So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them!

My iPad 2 home button has stopped working I have tried the swivel from landscape to portrait whilst holding the button, I have tried holding the off button then the home button and I was told I could create my own home button in the settings but I can't!

My iPad 2 home button has stopped working all together, I have tried the swivel from landscape to portrait whilst holding the home button, I've tried pressing the off switch then pressing the home button, the other thing I was advised to do was create a home button in the settings under the accessibility option but I don't have the option I was advised to use under there! Help! It's really frustrating having to turn the device off everytim I want to switch apps and I really can't afford to send it away to be mended! Many thanks in advance

The accessibilty setting that was mentioned is:
* Enable AssistiveTouch
Enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
Settings>General>Accessibility>AssistiveTouch: turn ON
*Note* If you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device *if your Sleep/Wake (power) button is not functioning*. You will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

Can I use the battery from 4gb Zen Micro Photo in the 8gb Zen Micro Pho

Similar Messages

Maybe you are looking for