Can I use the disk on my time machine 2TB to store data from iPhoto.  I want to take 250 GB and make it a disk

I have a time machine 2TB that is backing up my system.  Attached to the time machine is a 1T apple drive.  I would like to move the iPhoto file from my MacBook Air laptop to the time machine and use some of the disk as a storage area.  I plan to keep a backup on the secondary disk that is attached to the time machine is this possible? How do I make another partition on the time machine to handle my iPhotos.

Actually, it is possible to partition a Time Capsule, but it is not a practical procedure for most users, so that is likely what Kappy meant when he said that you cannot do this.
Consider that in order to partition the Time Capsule hard drive you must.......
o  Pull the drive from the Time Capsule (which voids the warranty)
o  Install the hard drive in a separate SATA to USB caddy or enclosure
o  Connect the caddy directly to your Mac to perform the partition procedure
o  Reinstall the drive back in the Time Capsule
o  Check to see if things work
In addition, the experts in the iPhoto support forum strongly recommend that you do NOT try to use the Time Capsule to store your working iPhoto Library. Apple warns against this as well in support documents.
Instead, as Kappy notes, the recommend solution would be to add a USB or Thunderbolt hard drive directly to your MacBook Air to store the iPhoto Library.

Similar Messages

  • The error that I am getting is this "Time Machine can't use the disk image because it can't be written to."  Any ideas on the fix for this?

    The error that I am getting is this "Time Machine can't use the disk image because it can't be written to."  Any ideas on the fix for this?  When I go to the Time Capsule my Macbook Pro shows that it is locked, I think I did something wrong, but can't figure how to unlock it to see if that fixes it.

    As far as we know, Time Machine cannot write to a disk image. It needs to write directly to the Time Capsule disk.

  • Time Machine can't use the disk image because it can't be written to.

    Time Machine can't use the disk image because it can't be written to. help!

    VictorSMiller wrote:
    I just started getting the same message.  I'm using a Western Digital My Book 3TB disk.  Normally I have the backups done with the disk attached to Airport Extreme.
    I hate to have to tell you this, but backing-up that way is unreliable and not supported by Apple.   See:  Using Time Machine with an Airport Extreme Air Disk.
    Backup failed with error: The target disk image volume is read-only.
    Most likely, you got this message before all this started:
    What that doesn't explicity say is, the backups failed the verification.  When that happens, Time Machine marks the sparse bundle as damaged and won't back up to it anymore (even if Repair Disk can't find the problem).  See #C13 in Time Machine - Troubleshooting for details.

  • My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

    My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
    The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
    I've run out of ideas. Help would be very much appreciated. Thanks.

    have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy....   google...." fcpx time machine problem"  Frist page link 
    http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
           You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
    booya!

  • Can I use the Disk Utility Application to backup bootcamp windows 7?

    Can I use the Disk Utility Application to backup Bootcamp that has Windows 7 on it?  If I install a new blank drive, I would like to know that using Time Machine I can get the MAC OS back and using the Disk Image Utility I can restore Bootcamp with Windows 7.

    NO.
    You have to use Windows or a Windows utility.
    There are programs that will clone an entire drive (sector) as well.
    DU does not though. Paragon does support Boot Camp.

  • Can I use the new Apple Thunderbolt  to Firewire adapter to download video from a video camera by firewire to my Macbook Air ?

    Can I use the new Apple Thunderbolt  to Firewire adapter to download video from a video camera by firewire to my Macbook Air ?

    Yes, you can use the 85 watt adaptor. You cannot use the new adaptors because your computer is not equipped with the proper MagSafe connector. But you can use the older MBP adaptors as well as a 60 watt replacement adaptor. All can be found at Apple's Online Store.

  • Can i use the ipad with 3G in egypt if i bought it from the US

    Dears
    Can I use the ipad with 3G in egypt if i bought it from the us

    You will need to get a local micro-sim, but yes you should be able to. 3G iPads bought in the US are not locked to a carrier, but in order to use a local micro-sim you'll need the AT&T version if buying from the US - the Verizon iPads are CDMA based and don't use sim cards (so are effectively locked to Verizon)

  • I lost everything in my iphoto library how can i restore the entire library with time machine?

    i lost everything in my iphoto library how can i restore the entire library with time machine? help!!!!

    Open the folder that contained the library and then enter Time Machine.  Select the most recent date that contains the library and then restore.

  • Can I use the "same" button multiple times for multiple galleries?

    OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
    stop();
    next_btn .addEventListener(MouseEvent.CLICK, nextImage);
    var imageNumber: Number=1;
    function checkNumber(): void{
        next_btn.visible=true;
        back_btn.visible=true;
        if(imageNumber==15){
            trace(imageNumber);
        next_btn.visible=false;
        if(imageNumber==1){
            trace(imageNumber);
        back_btn.visible=false;
    function nextImage(evtObj:MouseEvent):void {
        imageNumber++;
        mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
        mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
        mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
        mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
        mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
        mc_animals.source= "design/animals/an"+imageNumber+".png";
        mc_icons.source= "design/icons/icon0"+imageNumber+".png";
        mc_objects.source= "design/objects/pc"+imageNumber+".png";
        mc_typography.source= "design/typography/type"+imageNumber+".png";
        checkNumber();
    back_btn .addEventListener(MouseEvent.CLICK, backImage);
    function backImage(evtObj:MouseEvent):void {
        imageNumber--;
        mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
        mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
        mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
        mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
        mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
        mc_animals.source= "design/animals/an"+imageNumber+".png";
        mc_icons.source= "design/icons/icon0"+imageNumber+".png";
        mc_objects.source= "design/objects/pc"+imageNumber+".png";
        mc_typography.source= "design/typography/type"+imageNumber+".png";
        checkNumber();

    I'm still a novice with Flash myself, but I have two comments.
    First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
    Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

  • Can I use an external drive for Time Machine and storing other data?

    At the moment I have one external drive, a 500gb LaCie. My internal drive is 160gb. I don't think I'll be using all 500 of those gigabytes for a while, so I want to put them to good use. Can I make a partition on this drive and use that for Time Machine, leaving the rest of the drive for my documents and other files? If so, how would I partition the drive? I'm not fluent in Disk Utility and even though I'm pretty sure I know how to do it, I don't want to screw up. Also, how big a partition would you recommend?
    While we're here, I have a second question, somewhat relevant to the first. Could I move my Time Machine backups to a second drive if I wanted to? Also, if I used a big drive (say 1tb) could I use Time Machine to backup my current LaCie to a partition on that drive? Thanks in advance.

    videoCWK wrote:
    Does that also mean that I could back them both up on a very big drive?
    Yes. Time Machine will, by default, back up all of your external drives unless you specifically exclude them.
    Also, will Time Machine backups eat all my space after a lot of usage?
    It depends on what you do on your Mac. If you work often with very large files (video editing, heavy photo editing, big disk images, Microsoft Entourage data file, Parallels disk image file, etc) then your backup drive could fill up very quickly.
    I use my Mac mostly for e-mail, web browsing, iTunes, iPhoto, and the occasional iMovie project. I have 92 GB on my main hard drive (60 GB of which are my iTunes and iPhoto libraries, and one iMovie project.) My Time Machine backups consume 155GB on my backup drive, and that's after using Time Machine for a full year.

  • Can I split the hard drive with Time Machine.

    Just bought a new 1TB drive. I want to back up my MacBook. Time Machine formats the drive. Can I use the remaining 800GB for other things or does it have to be dedicated to Time Machine?

    Can I use the remaining 800GB for other things
    Yes. Just copy the other files to the drive.
    (45681)

  • How can I change the frequency of when Time Machine reminds me to backup?

    I used to get a pop up every ten days telling me that it's been ten days since I backed up Time Machine, but since the last time I backed it up, it's started notifitying me everyday. I'm just wondering if there's a way I can change the frequency, since I usually just back it up every few months and I don't keep my external hardrive hooked up all the time.
    Thanks!

    That's not a particularly wise backup strategy. You should backup at least once per week. Time Machine is designed to backup hourly if left alone. You should have a permanent backup drive that remains connected to the computer at all times except, perhaps, when you are traveling.
    If you disconnect the backup drive then Time Machine will start to save snapshots on your computer until the backup drive is reconnected at which time the snapshots are transferred to your backup drive and erased from the computer's drive.
    You can use a utility such as TimeMachineEditor 3.0.3 to change Time Machine's backup interval.

  • Can I use the airport express with a desktop computer that is not wire less- I want to have wifi in the house for an iphone

    Can i use the airport express with a desktop computer not wifi- I want wifi for my iphone

    I can't seem to find any information anywhere.  It seems like it should work since the AX is showing up on his wifi settings on both his iPhone and iPod.  Not to mention the Apple "Genius" told him that it should work.  However, they also told him that it came with an ethernet, USB and the stereo patch cables...

  • Can I use the WAN port on my AirPortExpress to extend my WiFi from my Time Capsule?

    OK folks, here's what I want to do.  I have a Time Capsule not only supplying WiFi, but also connected to the ethernet in my home.  What I want to do is use the ethernet to connect my AirPort Express and extend the WiFi signal.  I've tried various settings configurations and the closest I get is a duplicate network.  This causes problems for Home Sharing of iTunes accounts to my 2 Apple TV's, one that is connected to ethernet and the other WiFi.  Plus, it seems to confuse our iPhones and another WiFi computer from time to time.
    So can this even be done, is there another option I'm missing? We are trying to use this in a room for the AirPlay feature and the original WiFi signal drops pretty regularly, so moving it closer to the TC is a last resort.
    Thanks in advance for the help!

    Hi - if what you want to do is have the Express produce a wireless network with a new name then you need to configure it in the following way - it should be set to connect via ethernet in bridge mode and set to "create a wireless network" with a new name and password of your choice - if you need specific steps let me know.

  • Can I use the available space on Time Capsule to store media files?

    I recently bought Time Capsule and set it up to do backups of my iMac (Snow Leopard).
    Since, the Time Capsule has a 1TB HDD, I decided to use the Time capsule to store media files. However, when trying to resolve a Time Capsule issue with the Apple Care technician, he informed me that storing media files on Time Capsule is not recommended. He suggested buying an additional portable disk to store the media files. Wanted to confirm if this is truly the recommendation for Time Capsule.

    The Time Capsule was designed for Time Machine backups and that is the recommended use for the device.
    If you have plenty of space on the drive, there is probably no harm in using the drive for other data, but as space becomes tight, there is going to be struggle between Time Machine and other files regarding space allocation.
    But if you are storing your media files on the Time Capsule disk.....how are you backing up these files?
    The advantage in having a separate drive for your media files is that Time Machine will back up both your computer and the separate hard drive. Then you have backups for everything when....not if....a drive fails.

Maybe you are looking for

  • How do i convert an iTunes music file to a tone file

    how do i convert an iTunes music file to a tone file on a macbook air

  • BAM: Problem with 'Binding' while creating event linkage

    Hello colleagues. We have an ECC 6.0  and a PI 7.1 system. I want to create a prototype using the features of BAM. In transaction SWF_BAM, i tried to create a binding for the OB proxy parameters and the event object parameters. Unfortunately, the pro

  • My sony DCR-SR68 will not connect, stuck on "preparing"

    I have tried to connect my sony DCR-SR68 via USB cable, the camera displays proper screen (to choose USB connection for the internal HD), I choose the USB connect, then the screen stays stuck on "preparing." It's supposed to be communicating with the

  • Change in CST form 3% to 2%

    Hi, Our Company has recently go-live with MySAP-ECC-6.0 & TAXINN. The Govt of India changed CST form 3% to 2% recently. I have two options to change the same. a) By Creating New Tax Code -- this is OK with New PO but what to do with existing PO. b) I

  • Shopping for PCI cards

    I'm looking for :: USB 2.0 Firewire 800 SATA controller Gigabit ethernet I'd love to get combo cards if possible. i.e. USB/firewire and Gigabit/SATA. Really any combination of those 4 would be fantastic. any recomendations? I'm tired of searching eBa