Can I use the instrument I/O assistant express vi to communicate with a USB connected instrument ?
Can I use the instrument I/O assistant express vi to communicate with a USB connected instrument ? My PC is running Windows 2000 et Labview7 express.
where can I get information or examples on the assistant and USB communication ?
Yes you can - the Instrument I/O Assistant communicates with message-based instruments through VISA. VISA 3.0 supports USB instruments and VISA 3.0 is the version of VISA that installs with the Assistant.
Similar Messages
-
How can I use the parallel port as an input channel to communicate with a SPECTROMETER?
Hello,
The sensing system we use is called: FieldSpec Pro from www.asdi.com.
The spectrometer has a LPT terminal. I'd like to use LabVIEW to acquire signals from the spectrometer for further analysis.
Thank you!Dennis,
I appreciate your time.
I have asked the copmany for such infos, but it seems to be confidential.
Do I need an I/O DAQ-Card?
Dennis Knutson wrote:
About all that tells me is
that I'm located in the same town as the manufacturer. You'll need to
find some specification that describes the parallel port protocol.
Without that, you're just wasting your time. Even if the instrument is
constantly sending data, you'll need to know how to interpret the data
and there's nothing that says it has to be sending constantly. Maybe
you first have to write something to the port first. Talk to them and
tell them you want to replace their software with software of your own
and need to be able to read the data. -
Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI
Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI in without any additional software or graphics adaptor. I have a 520-1070
HP - 23" Touch-Screen TouchSmart All-In-One Computer - 8GB Memory - 2TB Hard Drive ? I used a HDMI to HDMI cable and the monitor was not recognized.Here are the specs for your HP TouchSmart 520-1070 Desktop Computer. As previously stated your computer Doesn't have a HDMI output, instead it has a HDMI input. This is designed to let you connect a game console, a DVD/Bluray player, etc. to use as a monitor.
If you wish to conect a second monitor to your computer, you will need to use a USB-to-video adapter such as the EVGA UV Plus+ UV39 or EVGA UV Plus+ UV19. Using an adapter like these with the touch feature of your computer may cause issues with pointer control and you may need to disable the touch feature to use "extended desktop".
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?
thanks
-
Can you use airplay to stream from an iPad to a TV with a network connection without internet access
Yes, you can use a network storage device for the storage of your content and use it on the Apple TV, but only as part of your iTunes library. So if your question is whether or not you can do this without using your computer or iTunes the answer is no.
-
I'm trying to use the PCI-GPIB controller to control lab equipment through MATLAB 6.1 (R12.1) under Linux. MATLAB's instrument toolbox seems to integrate with NI's board, but the MATLAB documentation says it requires the installation of a driver. I've downloaded the linux gpib driver, and I'm able to run the associated utilities (ibconf, ibic, ibsta), but MATLAB cannot interface to it. For example,
>> g=gpib('ni',0,1)
??? Error using ==> gpib/gpib
The specified VENDOR adaptor could not be found.
Where can I find a MATLAB driver and how can I install it?
Thanks,
RichardHello-
The knowledge base: "Can Matlab for Windows Call the National Instruments GPIB Driver?" Also applies to this question as well. This article is very extensive. Try searching on ni.com for "+matlab +gpib" for more details.
Randy Solomonson
Application Engineer
National Instruments -
Can I use the power supply from a 1.83GHz CD mini with a new 2.53GHz mini?
Because I'm too lazy to remove the old power supply, I just want to swap out my old mini for my new one.
I did this for a month, for the same reason as you. Both power supplies are are 110 watts -- although you can double-check that, if you like.
Eventually I did make the change, I guess because I didn't want to put "new wine in old skins". -
Ever since the IOS 7 update Siri speaks randomly. It's become more frequent sometimes every 5 mins. Very frustrating, I've done a full restore with Apple tech support which worked for about a month. Anyone else have this trouble? Thanks
What does Siri tell you?
Do you have Voice over activated in Settings/Genreral/Accessibility/VoiceOver ->off
Could also be "Raise to speak" in Settings/General/SIRI/Raise to speak ->off -
Can i use the same charger for a 4th generation ipod nano with a 5th generation ipod nano
I am buying a nano 5th generation ipod with no accessories> will my 4th generation charging lead work on it
Yes.
-
HT4614 How can i use the Thunderbolt cable to link my Mac computers
How can i use the Thunderbolt cable to link my Mac computers
Connect them with it and start up one computer with the T key held down.
(76624) -
Can you use the I pad power adapter with the I phone 5 lightning cord?
Can you use the I pad or I phone 4 power adapter with the I phone 5 lightning cord to charge your I phone 5 without damaging it?
Yes, the iPad charger has more wattage so it would charge your iPhone faster then the square iPhone charger.
-
I recently bought iphone6, My imessage and face time is not working and still it charged me for normal text message multiple times and still not able to authorise the usage. Let me know how I can start using the same.
Hello vinay34,
If you are having issues with activating your Apple ID for FaceTime and iMessage, then take a look at the article below to get it sorted out. Make sure that you have the Date and Time set to Automatic as well as any other steps listed in the article.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/en-us/ts4268
Regards,
-Norm G. -
VISA Assistant can not find the instrument.
I tried to control Agilent 34970A through RS232,
but the VISA Assistant can not find the instrument,
and there is no respond when I send a command to
the instrument. I am sure that the instrument is
good, and is set to RS232 interface, the cable is
right(verified), and the parameter such as baud
rate is the same as the computer.
(I am using LabVIEW 6.1)
Can anyone give me an explain about my problem?
Thank you very much!> "VISA Assistant" is the name of a utility that ships with Agilent VISA. I am not sure if it can work with NI-VISA.
Agilent VISA does work with NI-VISA -- provided everything is installed correctly. A user may wish to use both Agilent VISA and NI-VISA together if they have a mix of IO cards. If NI-VISA is present, then Agilent VISA should be installed in the side-by-side mode, and NI-MAX should set the Passport to On. Then LabVIEW will see all the Agilent cards, and Agilent VISA Assistant will see all the NI-Cards. (The last time I tried this though, NI-MAX didn't see the Agilent cards.)
What was not mentioned in the original question is what VISA configuration is being used. If more specifics are provided a more specific answer can be given.
[email protected] -
I'm tring to install a d2 quadra external drive but can't use the setup assistant because "PowerPC Applications are no longer supported". Anyone have any ideas?
You shouldn't need to install anything just to use the drive. Just connect it to your Mac and it should mount. If it's the Intego Backup Assistant you're trying to install, try the latest version which you can download here:
http://www.lacie.com/products/product.htm?id=10323
Regards. -
How can i use the amp designer or pedalboard for software instruments in garageband 10
how can i use the amp designer or pedalboard for software instruments in garageband 10?
and how can i customize the effects for the master track? in different factory presets are different effects, but how can i choose them manually?hongconga wrote:
I want to record a podcast using my Mackie mixer and have the mix sent to Garageband through the USB I/0, but it doesn't seem to give me the option.
i think the first thing to do would be to check with Mackie support. two things noted on Mackie's website:
DRIVERS::
No Driver Required for Supported Windows (PC) or OS X (Mac) Versions
(note "supported")
and
For the Mac::
Mac OS X 10.4.11 – 10.7.1
ask if their firmware currently supports OS X 10.9.x
Maybe you are looking for
-
RFC connection error between BW 3.5 and ECC 6.0
Hi gurus, We've defined an RFC destination between BW 3.5 and ECC 6.0. Connection test (SM59) is ok, but authorization one fails and ALEREMOTE users block. These users on both systems have good profiles. We look ST22 and find a runtime error on CALL
-
Has this happened to anyone else? if so how did you fix it?
my computer doesn't start up right. I start it, goes to startup screen and then either stays there or a black screen pops up and says "job reset will occur after ## more consecutive failures" and then it stops doing everything.
-
My special characters screen for pages is running in the background no matter what I do. It randomly pops up and then goes away. I can't close it even though I have closed pages and restarted my computer. How can I stop this.
-
Need some help in developing reports
hi, I want to develop some reports in java. I dont know how to develop them.can any one help me??
-
Error Ora-02068, Ora-03135
Hi all, I am using a database link from between oracle 10g enterprise & oracle 10g express edition on window based system. We are getting below given error at one client system and others clients system is working fine.. ORA-02068: following server e