Can I use the ipad2 cable to synch my iPod touch
Thanks..
Yes.
All iOS devices use the same 30-pin Dock Connector for data transfer and charging, with the exception of the iPod shuffle and very old models of iPod (that haven't been around for seven or eight years)
Similar Messages
-
Just purchased an ipad, can I use the same charger as for my ipod touch?
I just purchased an Ipad2 and wonder if I can use the same charger for it as my Ipod touch uses?
I doubt it, as my ipod recharger doesn't seem to charge my iPad at all hence the (Not Charging) where the battery would be.
Hope this helps -
Can i use the new iphone 5c as a ipod touch
I want to buy the iphone 5c but only use it as a ipod and will i still be forced to pay monthly bills?
I believe it has to be activated by a cellular carrier upon purchase. I do know that after you've done this and have used it as a valid cell phone that it can be used as an "iPod touch" type of device with no further issues...I'm doing exactly that with an older iPhone 4.
See the following (this is for an iPhone 4S):
http://www.maclife.com/article/howtos/using_new_iphone_ipod_touch
Seems as if it's possible but you'd need to buy the phone unlocked and contract-free. These can be very expensive. -
Can I use my old firewire charger with my iPod Touch
I've recently got an 8GB iPod Touch which obviously only came with a USB cable to charge and sync with my laptop.
However, I've also got an old 4th generation 20GB iPod which came with a firewire lead that connects to a firewire mains charger. Can I use this to charge my iPod touch from the mains? Also can I use either the firewire or the old USB cable to connect to my laptop??
Thanks very much.You can use the firewire charger to connect your Touch to the mains. I use my old one and it works just fine. I suppose you can also use it to charge using your computer though I can't say I've tried. However, as the newer iPods don't have any kind of firewire circuitry, you can't use the firewire cable to sync you iPod.
Best of luck. -
Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable? I have a double ended USB connector if necessary.
No.
You need to use this.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a
or this
http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a -
HT4614 How can i use the Thunderbolt cable to link my Mac computers
How can i use the Thunderbolt cable to link my Mac computers
Connect them with it and start up one computer with the T key held down.
(76624) -
Can i use the ipad2 3 G to make voice calls ?
can i use the ipad2 3 G to make voice calls ?
The iPhone version of Skype will work on an iPad and allows you to use 3G.
Skype's new iPhone application introduces 3G calling functionality ...
S. -
Can i use my ipad2 ac charger with my ipod nano
can i use my ipad2 ac charger with my ipod nano?
Yes - this article says that it can be used with all iPhone and iPod models : http://support.apple.com/kb/HT4327
-
Can I use the iPad 3 charger on my iPod classic?
Can I use the iPad 3 charger on my iPod classic?
Yes, according to this article.
iPhone and iPod: Using the iPad 10W USB Power Adapter
B-rock -
I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
How can I restore the game data from an old ipod touch to a new one?
How can I restore the game data from an old ipod touch to a new one?
Restore it from the backup of the old ipod.
-
I can´t remember the security code to unblock my iPod touch and when I try to synchronize it with iTunes I can´t because it ask me to introduce the code that I don´t remember. In my iPod says that it is desactivated and I need to connect to iTunes...so It returns me to the begining...
I already tried to reset the iPod, but it did´t work....
I need to activate again my iPod...Help!!Place the iPod in Recovery mode and connect to your computer and restore via iTunes.
Recovery mode -
How can I use my old iPhone 3G as an iPod touch?
How can I use my old iPhone 3G as an iPod touch?
See Here for Details...
Use iPhone as an iPod
http://support.apple.com/kb/HT3406 -
Can i use all ios 5 features on my ipod touch 4g
can i use all ios 5 features on my ipod touch 4g?
Since we are all only end users here like yourself, we would know of no such information. All we know is that iOS 5 will be compatible with your 4G iPod Touch.
B-rock -
How Can We Change The Quality Of Youtube app on ipod touch 6.1
How Can We Change The Quality Of Youtube app on ipod touch 6.1 like from hd to 240p i just cant get it when ever my video's play they're in HD and i have slow connection
Previous to iOS 6, Apple provided the YouTube app. For iOS 6, the YouTube app is made/developed by Google. It is now like any other third-party app.
Maybe you are looking for
-
Does IPC require an SAP CRM system ?
Hello, we need to install the SAP Internet Pricing and Configurator (IPC). Does this IPC require a CRM landscape ? As we have ERP usage type... Many thanks!
-
Purchase order line item block
Hi, Need to understand in what circumstance Purchase order line item gets blocked automatically. I have a situation in which net price is 0.01 and line item has got blocked automatically. This is through conversion objects(using BAPI_PO_CREATE). When
-
Save button in PO screen in display mode
Hi Friends, I am creating purchase order with reference to purchase requisition. In purchase order screen all data has pull-up but save button is in display mode, i can not save purchase order. I have gone through to spro purchase requisition/ order
-
I have a form Item which contains RadioButtonGroup and a Repeater which dynamically loads up RadioButtons from model data: <mx:FormItem direction="horizontal"> <mx:Label text="Status:"/> <mx:RadioButtonGroup id="statusType" selectedValue="{model.sele
-
Escaping of special signs, once it works, once not
Hi all, I would like to ask a simple question, I believe some of you know this issue already and know how to solve it, I googled an hour, changed the code 100 times, but with the first $query I get always "Execute not successful." Does anyone know ho