Can i use the laser jet printer P1102w with the i pad2?

Can i use the P1102w printer with my i pad or i phone?
This question was solved.
View Solution.

Hi,
Your printer is Airprint Compatible with the latest firmware.
Make sure your iPhone / iPad have iOS version 4.2 and above to support Airprint.
Upgrade the printer firmware from your PC by using the tool below, by using the tool for your OS:
Windows / Mac OS
Then you will be able to print from the iOS built in Print function as long they are connected to the same network as your printer,
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • I just purchased a hp laser jet printer m1217 with AirPrint, i am unable to get it to connect to my time capsule wirelessly, i am currently using WPA2 personal any suggests

    I Just puchased a HP laserjet printer M1217, i am trying to print wirelessly , the printer doesnot recognise my network, i am using a apple timemachine using WPA2 personal, anyone have any ideas

    Don't know if you ever figured this out but here is the answer...
    I just spent the last two days on this and have finally sorted it out. It actually isn't that hard to do but for some reason, no one has consolidated the information in one place!
    First and foremost, make sure that you have all the latest and greatest firmware updates for your printer, your computer and your mobile devices.
    Next, you need to connect your printer to your network via an ethernet cable, this is the only way to get in to the printer softare to configure it for your wireless network.
    Navigate the printer menus on the keypad to Reports>Config Report and print this report. It will provide you with the IP adress and IPv4 address for the printer.
    With the printer connected to your network and powered on, point your browser to the IP address of the printer. If this doen't work (it didn't for me) use the IPv4 address.
    This will open the configuration panel for the printer and will let you configure the wireless for the printer so that it can join your wireless network. You will see various tabs across the top. Select network. Then along the left you will see wireless. Choose that. Now you should see a list of wireless networks available including your very own home network. Choose that one, enter your password and hit apply.
    Disconnect the ethernet cable and you should be ready to Airprint from all devices. This worked for me, I can't imagine it won't work for all...then again...

  • Where can I download an user guide for a HP laser jet printer p2055dn ?

    Where can I download an user guide for a HP laser jet printer p2055dn ?   [email protected] 
    This question was solved.
    View Solution.

    Hi,
    You may not be able to find the manual for it but this is the manual for the P2050 series:
      http://bizsupport1.austin.hp.com/bc/docs/support/S​upportManual/c01461642/c01461642.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My HP 3015 laser jet printer is 220V. How can I run it on household 110V ?

    I got a brand new HP P3015 laser jet printer.  Because they are a fast printer, they pull a lot of power to keep the fusers happy.  In fact, the printer I got is a 220V model and it is not happy on just 110V household current.  How can I convert it to 110V?  Or, how can I feed it 220V worth of power at home?

    Hello @ReggieWagstaff ,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • I am running Windows365 and I can't get my laser jet 2015 to print. It is labeled as "offline".

    I am running Windows365 and I can't get my laser jet 2015 to print.  It is labeled as "offline".

    Hello there,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - LaserJet.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How can I use the print module to print different size images on one large "canvas"?

    How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
    I was thinking the print module would do this automatically for me.

    You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

  • Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

    Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

    Hello stacksofamber and welcome to Apple Support Communities,
    You should be able to find a Mac OSX driver for that printer. Did you check with the manufacturer/'s website?

  • I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? photosmart cant see the iMac.

    I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.

    Hi Shlomi
    It worked!!! Thanks so much, I've been messing about with this for hours.
    As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
    Any thoughts you have would be much appriciated
    Rob

  • I can't use the function of "print to video".

    I've recently purchased FCPX and Blackmagic Design Decklink HD Extreme 3(version 7.5.2) but I already know this combination looks quite weird because I'm using only DSR. This is the first time I have installed FCP.
    I installed FCPX and figured out there's no way to get the video from Decklink on FCPX so that I deleted FCPX, installed FCP 2009 instead and installed FCPX again on the same disk as Final Cut Pro 7... It's a shame to get rid of it.
    At first, I could get a good result when printing to tape. There's no problem. But it's not long before I failed to get what i wanted. VCR detects input signal from FCP 7 through Decklink but the monitor of VCR shows only noise. For now, I can't use the function of "print to video".
    Also, I connect the input of Decklink to the output of DSR and the output of Decklink to the input of DSR at the same time and monitor w/ the output of DSR. However, the output on the monitor shows something weird when I capture the video from DSR as if the signal is fed back.
    Someone told me that I have to use other version of decklink but i'm not sure it would be better if I just change the version.
    What's wrong?
    What should I do for fixing these all mess?

    I've recently purchased FCPX and Blackmagic Design Decklink HD Extreme 3(version 7.5.2) but I already know this combination looks quite weird because I'm using only DSR. This is the first time I have installed FCP.
    I installed FCPX and figured out there's no way to get the video from Decklink on FCPX so that I deleted FCPX, installed FCP 2009 instead and installed FCPX again on the same disk as Final Cut Pro 7... It's a shame to get rid of it.
    At first, I could get a good result when printing to tape. There's no problem. But it's not long before I failed to get what i wanted. VCR detects input signal from FCP 7 through Decklink but the monitor of VCR shows only noise. For now, I can't use the function of "print to video".
    Also, I connect the input of Decklink to the output of DSR and the output of Decklink to the input of DSR at the same time and monitor w/ the output of DSR. However, the output on the monitor shows something weird when I capture the video from DSR as if the signal is fed back.
    Someone told me that I have to use other version of decklink but i'm not sure it would be better if I just change the version.
    What's wrong?
    What should I do for fixing these all mess?

  • I have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they r printed?

    i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?

    why can't you use the keyboard the way it is printed?

  • Can I use the old generation rebuilt ink cartridges in my hp 1513 all-in-one printer

    Can I use the old generation rebuilt ink cartridges in my hp 1513 all-in-one printer.

    phantom3 wrote:
    Can I use the old generation rebuilt ink cartridges in my hp 1513 all-in-one printer.
    Hi,
    Well, your printer simply won't print.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT4356 Can I use a 'pc' network printer connected via ethernet to the home wifi network ?

    Can I use a 'pc' network printer connected via ethernet to the home wifi network ?
    or must the printer I want to use also have a wifi connection ?
    I have a home network using ethernet connected devices to a router, also attached to th erouter is a WiFi unit. We are using the WiFi unit to connect to the network and hence to the big wide WWW.  We now want to print from our IPads pereferable to our netowk connected HP Officejet Pro 8500 A909a series. (not the wireless model).
    I was using the HP ePrint app to print from the Ipad, but I do not fully understand how this works. It seems that you must use the app to do the printing which is fine for basic email and photos, but I can not access the drawing package I have, and want to print from it. Please what is it that I do not understand.

    You must use an airprint printer directly connected to wifi through it's own wifi card.
    See here for info:
    http://support.apple.com/kb/ht4356

  • How do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

    how do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

    Did you look on the HP website?
    Click the picture to go to the page.

  • Can I use the computer and printer during download as it says it takes 9 hours to download?

    can I use the computer and the printer during the download as it says it takes 9 hours to download?

    Yes.  It will still download in the background.

  • HP2420 Laser Jet printer only printing black pages

    I have an HP2420 laser jet printer that is only printing black pages.  I have tried 3 different toner cartridges so the cartridge is not the issue.  I saw that there are maintenance kits.  Could these help solve my problem and if so, how do I use them?
    Many thanks

    Okay, now where was the paper jam located? Was there any paper torn off when you cleared the jam? As I stated before, almost sounds like a voltage problem, might be one of the contacts might be having an issue. Also, since the machine is new, I would suggest contacting HP, the machine should still be under warranty, if it is in fact new, and see if they can either provide service for it or just replace it. That is of course if you do not get it resolved.

Maybe you are looking for