Can i use the recovery of a different computer to recover my hp dv 6015tx?

os of my dv 6015tx has just crashed...i tried to install windows 7 professional....so can i use the recovery discs of any other computer to recover it??

Hi,
This is not going to work since some hardware "tattoos" have been done. Let's put this way if we could do that how Bill becomes a billionair ???
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Can I use my account on a different computer?

Can I use my account on a different computer?

As Manish suggested please elaborate on what you are trying to accomplish.
Thanks
Nikhil

My configuration audio "output" is only numerique and I would like listen to audio by integrated loudspeaker. I can't use the keys "sound on my computer. If I click on I have a icon "forbiden". Can you help me

my configuration audio "output" is only numerique and I would like listen to audio by integrated loudspeaker. I can't use the keys "sound on my computer. If I click on I have a icon "forbiden". Can you help me

Si vous tappez sûr le cle <<option>> et cliquez vôtre souris de l'icon de haut-parleur
de le haut partie de sa Desktop, vous pouvez voir les choix pour le son: les haut-parleurs internales, Line out et Digital Out. C'est tout ! Ou cliquez de la Pomme a gauche, choissisez Préferences, et Son, et voila..... le meme chose.....
Merci d'avoir choisi Apple
John B

Satellite L500-19X - Can't use the recovery disk

Well I got this laptop two days ago and used it once after installing fire fox and my mobile broadband drvier's and going back home to boot up and find it was going to happen,
I had tried safe mode (all three) and repair and all I got was a black screen with the cursor up where there should have been a language screen (I used the recovery disk that came along with the laptop) so anyway after finding out I wasnt going to be able to repair it I tried to install but of course that didn't work either so I put my XP 64 bit OS on and worked perfectly fine, then I upgraded (using my own upgrade windows 7) and that works fine no problems, so I tried again with the original windows 7 that came pre-installed on the laptop's hard drive and all went find untill it starts installing driver's or updates (I'm not 100% sure on this but it is at and/or after the face recognition installation,
Then it shuts it's self down and boots back up to automatically restart and asking me if I want to repair due to a bad start-up so I do the repair boots back up and still says I need to repair and finds nothing wrong and carrys on in that circle.
Now I have been told that it could be the register or it is a graphics problem, I myself am getting pretty fed up of having to install/reinstall/format this laptop.
So if there is anyone who know's what is wrong or what to do or even if it needs to be sent back to be fixed that will be very helpful.
I thank anyone in advance.
Happy new year :)

Hi
Well, I think its really hard to say what the reason is. Maybe the recovery disk is scratchy or the files corrupt there.
At the moment I cant imagine that its a hardware problem because other Windows disk working properly.
In your case I would try to install Windows 7 from a Microsoft disk and then see what happens. If it works properly and you can install all drivers & tools you should order a new recovery disk from Toshiba directly.
Bye

Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)
I expect your support...
thank you very much...

> how can I be sure that the disk is properly recognized before I buy it???
What do you mean exactly? Did you mean the HDD???
The A300 supports and 2.5 SATA HDD and all 2.5 HDD should be recognized properly since the SATA HDD controller hasnt any limitations.
Bye

Can we use the Portal of a different BW system than we get the data from?

Hi Guys,
we use a BW on HANA ABAP System with a Business Objects Server Connection in a proof of concept scenario. The BW system HS1 has Usage Type ABAP only. Besides of this we have a “normal” BW System, P70with a Usage Type ABAP as well as Usage Type JAVA (J70). As a third component we do have a BO Server, where we have stored some DesignStudio Reports with Data from HS1.
We would like to use the existing J70 Portal of our “productive” BW Portal as an access point to the design studio reports.
What I am wondering:
Can we use the SSO Ticket that we get when we log in our portal environment to connect to our BO server?
Are we able to use then BO Reports that are connected to another BW System?
How we do this or do we have to take something into account?
Regards,
Cemal Aslan.

hey Cemal,
it might depend on your releases... we currently have a test scenario with a Portal that is being used to display reports from a 7.31 BW system as well as the embedded 7.31 BW system of an ECC6 (EHP6) ERP system (as far as the Portal is concerned, that's just another BW system). The Portal is a 7.31 system as well.
I don't know too many (technical) details as anything beyond the BW server is out of my hands. I think this was not possible in older versions of the Portal though...
Cheers,
Raf

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

How can I use the same session for different components acroos application ?

I am trying to include the components(chat, filesharing, whitboard) in different parts of my application. User should be able to access any of the component. We would like to have a single "ConnectSessionContainer" so that we don't see same user creating a seperate session for each component.
Is there a better way of dealing with this other than declaring the "ConnectSessionContainer" in the main application ? Is there a way to check if we have a "ConnectSessionContainer" session already established ? Please help . Thanks.

Thanks for the response. Let me explain what I am trying to do..
I am trying to create components at different places(screens) of the flex application (not in the same .mxml file).
Each time I create a component, I am using a "AdobeHSAuthenticator" and "ConnectSessionContainer" which is resulting a new participant in the room.
For example
screen1.mxml -
<mx:Panel>
<rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
<rtc:ConnectSessionContainer id="mySession" >
        <rtc:Roster id="myRoster" width="100%" height="100%" />
        <rtc:Chat id="mychat" width="100%" height="100%" />
</rtc:ConnectSessionContainer>
</mx:Panel>
screen2.mxml (in the same application) -
<mx:Panel>
<rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
<rtc:ConnectSessionContainer id="mySession" >
        <rtc:SharedWhiteBoard id="wb" width="100%" height="100%" />
</rtc:ConnectSessionContainer>
</mx:Panel>
Here, I open a screen1 and authenticate as UserA and when I try to open screen2 flex is considering me as another user though I am in the same application.
1) How can I use different components which are in different flex files as a same User ?
2) Should I place my <rtc:AdobeHSAuthenticator> and <rtc:ConnectSessionContainer> in the main application which calls the screen.mxml?
3) What is the best way to do it ?
Thanks for your time !

HELP can't install lion can't use the recovery HD

After lion has sat there for an hour installing with the installation bar and after it had completed installing and restarted. When it boots back up it just sits there with a grey screen, apple logo and a little rotating circle. I have let that rotating circle sit there for an hour and nothing is happening. I did a force shut down and booted it up in the recovery HD. I went to reinstall lion, everytime there is nothing left on the bar a message pops up "Do you want to cancel this download?" and I never touched anything. After pressing cancel twice to continue the reinstallation it goes back to the menu it start with. What can I do?
Thanks for any help

I was too optimistic. Now I was able to install PS again from the Download link in the CC website.
I followed as PS was installed in CC console's "Find new apps" section. Everything OK here.
I can see "You installed Photoshop CC" in CC console/home. Everything OK here.
I can't fint the actual program anywhere. Nothing on Launchpad. Theres a folder "Adobe photoshop CC" in Finder/Applications. But it's relatively empty. Nothing to start the actual program with.
I restarted already. Problem remains.

Removing a WINDOWS partition, and using the OS on a different computer..

Hello All,
I am debacled at the thought of this question. I use a partition of my hard drive to run Windows 7; to run older games and the sort. I purchased an actual retail copy/disk from best buy and did all the necessary work to intall it on my Mac. My question is, first, can you utilize the same copy on a different PC, while still being on my partitioned hard drive of my Mac? Second, if not, could I remove the partition form my Mac and simply install it on a brand new PC, built from scratch?

gabegrant1 wrote:
My question is, first, can you utilize the same copy on a different PC, while still being on my partitioned hard drive of my Mac?
Not for long. in 30 days and you'll have problems.
Second, if not, could I remove the partition form my Mac and simply install it on a brand new PC, built from scratch?
Yes you can.
When Windows is installed it takes the hardware configuration into the copy protection and sends that to Microsoft with the license key you enter.
So when you install your license of Windows on the new machine, it's going to require jumping through Microsoft's hoops to activate, then a few days for validation before you can download all the security updates required.
In the meanwhile any time your new machine is connected to the Internet, even for a short period, it could be pwned good by malware as they are roaming around looking for unsecured boxes awaiting activation for instance.
Perhaps it would be best to install Windows offline, then find their way of activating it without going online, then download a combo update from them on your Mac, then apply it to the PC offline, that way when it connects the first time it's not immediately pwned.
Make sure the anti-malware is installed before you go online as well.
If you install fresh and updates online, it's going to take days and days to get all the updates current, anytime you could get pwned too.

How can I use my ipod on a different computer

The original computer I set my ipod up on no longer has internet access. How can i set up my ipod on another computer so I can download from itunes without having to delete all my songs?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

New computer, can I use the disc on my new computer to install it there?

Can I install it on my new computer after it's already been installed in my old one?

If you do not plan on using the old computer, you are better off deactivating your suite, then uninstall. But as far as the license goes you are allowed to have it installed on two computers but only one copy can run at a time. This is meant to allow you to have it on your desktop and laptop as that is the most common senerio.
If you already have it installed on two systems and can not access one of them to deactivate it, you can call adobe and see if they can do it for you, not sure if they will but it is worth a try.

Can you use the same form for different datasheets?

Hello! Thanks in advance for your time.
To keep this short, I have created a form at my place of work to do a type of process audit. The form has worked extremely well and now other areas of the business would like to use it. For example, let's say I wanted to perform the exact same process audit
at a supplier, but I want a separate datasheet on my SharePoint page to separate in house audits from supplier audits. The form I created for in house audits took an extremely long time and has tons and tons of fields and tons and tons of rules.
Can I simply save the form to a new location, and somehow publish the form to a datasheet view so all fields from the form appear as columns and the form submits data to the new datasheet? If so, can somebody explain how? I would be eternally greatful!
Mitch

Would this be an InfoPath form?
One option would be to extend your current form to have a 'Type' field that has 'Internal' and 'Supplier' as choices. You could then create views to show 'All', 'Supplier only' and 'Internal only' subsets of the data.
Alternatively you may be able to save the list as a template and then re-use it but I can't remember how well if at all that works.

Deleted emails on Thunderbird, message said can't use the recovery option with Firefox 30.

Accidently held the delete button down too long. Deleted all emails. Not in the trash nor I caouldn't find them anywhere on Thunderbird.
Please help me recover them.
Thank you

sometimes this add-on will bring mails back. https://nic-nac-project.org/~kaosmos/index-en.html#recDelMsg

I had a Creative Cloud Fotografielidmaatschap Student and Teacher Edition (één jaar). It was expired. I renewed it under Bestellingnummer AD001809782EDBE but I cannot download photoshop. Neither can I use the Photoshop already on my computer Dell XPS One

.

Hi There,
Kindly the below mentioned steps.
Sign in, Sign out | Creative Cloud desktop app
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Thanks,
Atul Saini

Can i use the recovery of a different computer to recover my hp dv 6015tx?

Similar Messages

Maybe you are looking for