Can I use the tom tom app on my iPhone 4

I have a tom tom app on my iPad and want to know if I can use it on my iPhone 4?

I use it on mine. If you are wondering if you can use it on more than one device, then yes you can.

Similar Messages

  • Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help

    Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.

    Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?

  • Can I use the color splash app on my imac instead of my iphone?  How do you do that?

    can I use the color splash app on my imac instead of my iphone?   How do you do that?

    Software written for the iPhone and other iOS devices can't be run on a Mac.
    (61491)

  • Can i use the one apple id for my iphone

    Can i use the one apple id for my iphone & ipad...is there any demerrits to this

    what if i dont wanna use the same id.....
    sorry to be direct & asking you my ?
    Whenever i downlaod an app OR game ...it will NOT be shared on my wifes iphone4s..correct
    but when ever i take a pic from my ipad...will it be shared thru icloud....i want it to be shared (only pics)

  • How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

    How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

    If you purchased AppleCare + within 30 days of getting your iPhone 5 you are allowed 2 instances of breakage replacement with a $49 deductible. If you do not have AppleCare + accidental breakage is not covered under you warranty, you can do an out-of-warranty replacement for $229.

  • I can't connect to my iTunes library on my Macbook Pro using the Apple Remote app on my iPhone 4S. Why?

    Hi all,
    I've been looking through the forums for help with this problem. There are a couple of threads with similar problems, but no solved threads and the discussion doesn't seem to go anywhere... As far as I can tell, it's been causing a lot of annoyance for many users, including myself, but it looks like the community's in the dark about why it's happening!
    I'm trying to connect to my iTunes library using the Apple Remote app on my new iPhone 4S. As you may know, there are two ways to do this:
    Connect via Home Sharing by setting up Home Sharing on both iTunes and the iPhone, or
    Connecting directly to iTunes using a four digit passcode.
    I've tried both methods, and neither work!
    Here's what happens for each method:
    From the Remote app start screen, I tap the "Turn on Home Sharing" button. I enter my Apple ID details (which are definitely correct), and get a confirmation message on my phone saying "Home Sharing is on using [my email address]. To control iTunes: Choose Turn On Home Sharing from the Advanced menu in iTunes on your computer." I then go to iTunes, turn on Home Sharing, enter my Apple ID again and get a confirmation message saying "Home Sharing is now on", etc. However, there's no connection formed between my iPhone and my Macbook Pro - the Remote app just shows a message saying "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account [my email address].
    From the Remote app start screen, I tap "Add an iTunes Library", and the four digit passcode is shown on my phone. I select the new "Quintin's iPhone" item that appears in the iTunes sidebar under "Devices", and enter the passcode on the screen that appears. Once I've entered it, I get a confirmation message saying "Your Remote is now able to control iTunes" with an "Okay" button. Clicking the "Okay" button makes the screen and the sidebar item disappear completely. On my phone, a message that says "Looking for ..." is shown on the screen with a spinning loading wheel, but nothing happens. After a minute or two, it stops and simply says "Could not find".
    After trying both methods, I went through all of the troubleshooting steps here: http://support.apple.com/kb/ts1741 . Absolutely no effect.
    I should mention that I was experiencing similar problems on my old iPhone 3Gs with an older version of iTunes. I thought it might have been some kind of hardware fault and expected it to clear up once I got the new phone, but the problem is still there. It's a new phone, a new computer, a newer version an iTunes... even a different network I'm trying to connect to it on. Bizarre!
    I've even tried using the Mobile Air Mouse remote application instead. However again, the Mobile Air Mouse app on my phone can't pick up the Mobile Air Mouse server on my Mac.
    I'm kind of at the end of my rope here. Anyone?

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • Can I use the MSI Gaming App OC settings in Afterburner then uninstall Gaming Ap

    Hello all,
    I finally bought an MSI GTX 760 TF OC Gaming Edition GPU last week. Unfortunately the OC isn't programmed into the BIOS and to get the highest Factory OC I need to use the MSI Gaming App. The problem is it does not start with Windows or remember your last Clock Selection.
    I know Afterburner can start with Windows and apply your last selected profile.
    So can I......
    1. Open Gaming App and select OC.
     Open GPU-Z and see how much the Clock Speed has increased.
     Restore the default Clock (Gaming).
     Open Afterburner and apply the same increase to the clock value as the Gaming App gave me.
    Save the profile.
     Tick the 'Start with Windows' box.
     Uninstall the Gaming App.
    2. Will the above effectively apply the same OC as the gaming App and therfore make the Gaming App obsolete?
    3. Also I've read on some forums that Afterburner will only OC the MSI card if the gaming App is installed. I'm away from home so cannot test any of this. Maybe this was the case with the original version of the gaming app. can anyone confirm?
    4. Also I've read people reporting that once the OC has been applied it is locked at this high clock and doesn't downclock when idle. From what I've seen the Gaming App does downclock depending on GPU demand. As does Afterburner. Can anyone confirm?
    I don't know why MSI did things this way. It's a Gaming Edition card so there should be a way of applying the factory OC and leaving it set that way. The Gaming App is a nice simple little tool but as a bare minimum they should let us start it with Windows and automatically apply the last selected Clock profile.
    Dragging the shortcut into the start-up folder doesn't work for me. And even if it did, the last profile selection is not remembered.
    To be honest, the Gaming App is ideal for me but only if I can set it and forget it. There should be a box (like there is in Afterburner) that starts the Gaming App when Windows starts and applies the last Clock profile selected.
    Now that would be simple. Afterburner is great and gives you lots of control. But I just want the OC that MSI have created. It should be set at BIOS level for a so-called OC Gaming Edition card.
    From the official Afterburner Guide on this forum....
    "Another thing which needs to be kept in mind is that maximum clockrates for the latest GeForce GTX7xx Gaming requires running >>Gaming APP<<. Switch to Gaming Mode (N770 TF 2GD5/OC (GeForce GTX 770 GAMING)) or OC Mode (N780 TF 3GD5/OC (GeForce GTX 780 GAMING)) to allow maximum boost clockrates."
    Many thanks in advance,

    Sure you can set these settings (clock rate etc) in afterburner and you should be good to go. Just for stability, run a benchmark. It should be same OC as Gaming App applies, but GApp might change voltages (never used it so not sure).
    Afterburner works with ANY brand's card. However MSI Gaming App not.
    However if you change settings in Nvidia control panel in : 3D settings -> Global Settings -> Power management mode -> change from Adaptive to Prefer max performance. After this card will neved downclock even at idle.

  • Can I use the same Apple ID for two iPhone's?

    Can I use the same Apple ID on both mine and my partners iPhones? and will there be any troubles or problems that may occur?
    Thank you

    Yes, but there will be quirks. See: http://support.apple.com/kb/HT1495
    What isn't obvious is that you can use different Apple IDs for different functions on your iPhone; for example iCloud, iTunes & App Stores, Game Center, iMessage and FaceTime can all have different Apple IDs from each other.
    If you use the same Apple ID for Find my iPhone then both phone's locations will show up at https://icloud.com/find. Which can be good or bad, depending on your situation.
    If you use the same Apple ID for iTunes & App Stores you can have the same apps and music on both phones; some or all of them.
    You probably want different Apple IDs for iMessage and FaceTime; otherwise, you will get each other's messages
    Also different for Game Center.

  • How can I use the "open file" alarm on an iPhone?

    In the iCal program on a Mac, I can set an alarm to open a webpage at a specified time each morning automatically by using the "open file" feature in iCal and using a .webloc file for the URL.  However, the event, when synced through iCloud, does not open the webpage on my iPhone.  Is there a way for me to use the "open file" feature on my iPhone?
    If not by using the "open file" feature, is there a way (through an app or other setting) for me to open a website or a program at a specified time each morning?  Thanks!

    timl006 wrote:
    Hi all,
    I have an iPhone 4, running the latest IOS 4.x revision.  Like many of you, I have installed 3rd party apps to replace the existing default apps from Apple in order to get improved functionality.  Chief among them is the calendar app "Week Cal".  I had already switched to my various Google calendars for my appointments exclusively.  I then made my principal Google calendar my default calendar on both my iPhone and iCal on my Mac.
    The problem is that even though I deleted all local calendars on my mac and told the default iPhone Calendar app to hide all calendars, occasionally it somehow "finds" my Google calendar. Once found, the Calendar app is the one that pops up upon calendar alerts and not Week Cal.  The switch does not seem to be linked to syncing.
    Question #1:  How can I tell my iPhone what my default apps are?  Do I need to do something on my Mac as well?
    I'm guessing that Week Cal has some sort of setting that you use to point it to your calendar, yes?
    If so:
    #1 make sure that Sync iCal Calendars is unchecked in iTunes.
    #2 on your iPhone... Settings > Mail, Contacts, Calendars > turn OFF Calendars for all accounts.
    Now the iOS should no be looking to make contact with any data for Calendar.

  • Can I use the new Photos app with Lightroom?

    I have been a user of Aperture but with the new Photos app I can no longer do that.  Will Lightroom work with the new Photos app?  I want better editing tools than Photos offers.

    No, Lightroom and Photos cannot share a Library. They are both Photo Managers (neither is actually an editor) with non-destructive processing. The only way to get from one to another is to export to the Finder then import to the second app. It's hard to see a workflow that encompasses both apps.
    Really you need to decide which app you want to use to manage your Photos: Photos is a free app geared at the consumer with a phone or point and shoot. Lightroom is geared for the serious hobbyist or Pro with a DSLR, Which photographer are you? Best to pick one horse and ride it.   

  • I have a new mail update and it won't even open, and now I can't use the old mail app either.

    I have a new mail upgrade and it won't even open. How do I fix this?

    You mean the Apple Mail app? Updated through software Update in the Apple Menu?.
    Or maybe you downloaded Mail from another source?
    Do you still have Snow Leopard or didn't you update your profile?

  • How can I use the same apple id on 2 iphones yet have the owner contact different?

    My husband and I both share apps, contacts, calendars, etc and use same apple id...We both own iPhone 5's. When we each set up our iphones, on setting in siri setting and mail, contacts, calendars setting we each put contact for our info... Well the problem is that if I change mine to my info it changes it to his, and same if he changes it to his name on his iphone it changes 'my info' on my iPhone's setting.... so when using siri or mail... we cant identify each phone.... So can we still use same apple id and have separate "my info" settings.....

    Short term solution, do this on both devices
    Settings > iCloud > Shut off anything you don't want shared
    Long term solution (actual solution)
    You need seperate Apple IDs for iCloud. iTunes and iCloud are not the same.
    Create a new Apple ID > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    On one of the devices go Settings > iCloud > Delete Account > Sign in with the new Apple ID
    This will seperate your Contacts, Calendars, Messages etc.
    You both can continue to use the same Apple ID for iTunes and share apps and music

  • Can I use the same apple ID on my iphone and ipod touch

    I have been successfully using the same apple ID on itunes, my iphone and ipod touch
    I upgraded both my ihpone and ipod to iOS5 and now both devices are telling me that my apple ID is already being used when I try to sign in
    any ideas? I have always used the same ID so I can have purchased apps on both devices
    can I carry on doing this now icloud has been launched? I'm a bit confused!
    Emma

    Look at :
    http://support.apple.com/kb/HT4627?viewlocale=en_US
    Yvan KOENIG (VALLAURIS, France) samedi 15 octobre 2011 11:04:54
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Can I remove the apple watch app from my iphone?

    With all the apps that Apple requires to be downloaded, it leaves little room for the apps I want or pictures or music.  Is there a way to delete this app or other apps I don't want/use that Apple puts on there?

    It is a little different than the PC "bloatware" The Apple provided apps go back to the first iPhone and prior to Apple allowing third party apps. At that time the smartphones available (Blackberry, Treo) all included Mail, a browser, weather, and stocks apps so Apple did too. Apple also included the iTunes Store and Music apps since they operated a music store. Since then they have continued to offer these apps and have added Newsstand (really a folder), Passport ( a new feature that has to be tied to the OS due to sandboxing restrictions,a Clock, and Apple Watch. Stocks is included since the Blackberry was primarily used by businesses and Apple wanted to be able to include this market.
    Once Apple opened up to 3rd party apps they could have dropped some of the included apps but they really don't take a lot of space and I would guess they are widely used. I know I use the included Stocks and Weather, they meet my simple needs and I have no reason to download another and learn it. Oddly if you read the iPad community when it was first released one of the biggest complaints (and it still pops up) is not included clock (now not applicable), weather and calculator apps. You just can't win.

  • Can i use the same itunes account for 2 iphones?

    CAN YOU USE 2 IPHONES WITH 1 ITUNES ACCT?

    Yes.  You can share an Apple ID for purchasing.  You should avoid, however, sharing one for iMessage or iCloud.  This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/.

Maybe you are looking for

  • Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

    Anything known on this issue? Solutions? Even importing files from memory card is a problem. In import window images are not diplayed as images but all the same blue mini images. vertical files are changed into landscape positions and more. Mac versi

  • How to set up port configurations under Tomcat

    Hi Friends, I want to run 3 different jsp/servlets applications on a single Tomcat instance installed on my system.I want all of them to listen to different ports say for eg. 3000,3005 and 3010.So can someone pls tell me what changes I need to make i

  • Ipod corrupted - Error -53 when attempting to sync 160gb ipod classic

    Every time I attach my ipod to my PC (Vista) I get a windows message that the drive is corrupted. I also get to various points of the syncing process in itunes and it fails to complete as I get an itunes error message number -53. I seem to have tried

  • Is DAQmx and LV 8.0 compatible with vista

    I think I know the unfortunate answer but I made some minor (mostly cosmetic changes) to an application previously developed with LV 8.0 daq mx 8.4? (HS-DIO calls) and windows XP.  I recompiled under 8.0 and Vista (New daq drivers as well 8.5?) and s

  • Adding Assignment Block to Sales Order Screen

    Hi We enhanced the SAP GUI CRMD_ORDER screen to have a new tab and added custom fields to it. This was done using easy enhancement workbench. Now we want to do the same thing to the Sales Order Screen in Webclient UI. I have  seen a lot of discussion