Can I use this DIMM in this Powerbook G4?
*My father has a Powerbook G4:*
Model Name: PowerBook G4 15"
Model Identifier: PowerBook5,2
Processor Name: PowerPC G4 (1.1)
Processor Speed: 1.25 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.7.1f1
Memory:
SODIMM0/J25LOWER:
Size: 256 MB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
SODIMM1/J25UPPER:
Size: 256 MB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
*....and I have an older 1GB Samsung DIMM that I'd like to install if possible.*
*The DIMM's label says:*
1GB 2Rx8 PC2-5300S-555-12-E3
Made in China M470T2953EZ3-CE6 0746
*Can it be used?*
*Also - just a general question - if a DIMM physically fits into the slot, is there a risk of permanently damaging the computer if the specs are wrong?*
Thanks
PC2-5300
No. It won't fit into the slot.
(55682)
Similar Messages
-
Apple Disk OS 10.4.2 PowerBook G4 can I use this on my Desk Top G4?
I have OS disk that is for a PowerBook G4 15inch and 17-inch, can I use this on my Desk Top G4? If not what disk do I need to get up to OS 10.4?
ThanksNo it won't work.
You need to get the retail Tiger disk* which looks like
These used and refurbished Mac shops*, and sometimes the Apple Store still have it available:
http://www.macmaps.com/usedrefurbished.html
- * Links to my pages may give me compensation.
Message was edited by: a brody -
New iMac user here, I recently bought a new iMac and Time capsule and have the whole network up and running now. I have connected another external HD to the time capsule as well and have a total of 3 TB of storage connected wireless to my new iMac. My question is can I use this location as the default location for iTunes? I doubt I am gonna run out of room considering the iMac has 1 TB of storage already, but I'd prefer to keep my movies and music off the Mac to keep it running smoothly. If this is possibly, I'd like to do this with iPhoto as well.
I would advise against placing your iTunes library on a Time Capsule.
The Time Capsule is designed as a backup device and not for wireless streaming of video.
Before you do anything more, can I suggest you put into place a reliable, redundant backup strategy.
Unless you are prepared to risk loss of your iTunes library due to a hard drive failure, I would not put iTunes on the Time Capsule.
Leave your iTunes library on your iMac until such time as your internal drive is full. Backup to Time Capsule using Time Machine and create a clone of your internal iMac HD to your external drive.
That's my 2 cents worth. Others may have a different opinion. -
I bought used iPhone and on this iPhone I'm not able to make new account on i Cloud'. How can I use this iCloud's on used iPhone Please help me
When I logging there it told me that maximum no of iCloud's Account already activated on this iPhone.
Please help me how can I open new iCloud's account on this iPhone
Regard
Faiz khanSet up the account using a desktop or laptop, then sign
into that account on your iPhone.
I am not aware of any method around the restriction once
the maximum has been created on any individual iPhne. -
Can i use this download and install on multiple computers?
Can i use this download and install on multiple computers?
I assume you're talking about the Lion installer? If so, yes, you're allowed to use it on any machines authorized with your Apple ID (which I believe means a maximum of five machines). This is, of course, meant for family use... I'm not sure about business use, but I'd suspect you need one copy per machine at a business. If you're in that situation, you may want to wait for the $69 Lion flash drive Apple will be releasing next month sometime, as that won't be tied to an Apple ID. But check with Apple to be sure on that.
-
I have a dollar amount balance on my itunes account... can i use this to purchase apps for my MacBook Pro?
You should be able to. As long as you are signed in to the same AppleID that has an available balance. The services are linked.
-
With the online package of PS/LR, how many machines can I use this on?
With the online package of PS/LR, how many machines can I use this on? Can I have it at work and home?
2 Computer License http://forums.adobe.com/thread/977272
-
I have a limited storage in iPhone so i bought 20g iCloud. how can i use this iCloud storage in my device to store music and photos?
Welcome to the Apple Community.
You could sign up for iTunes match and use iCloud photo library with optimisation enabled. The later will keep optimised photos on your device and iTunes match will let you access your whole collection and make room for newer content by removing older unplayed items. -
Updated to 10.6.8 and now safari, system preferences, address book say "can't use this version"
Got a new harddrive in my 2010 macbook pro and rebooted it with time machine back up from a older mac running 10.5.8. I loaded snow leopard 10.6 from disc then updated to 10.6.8 on new computer after restore from back up. Now the Safari icon, system preferences and address book won't open and a box opens saying you can't use this version of the application system preferences with this version of mac os X You have sytem preferences 5.2. or safari says you have safari 5.0.6 etc. How do i update the apps so i can make them actually open. I can get them open in a round about way but not from the icons on my sidebar.
If you have an os on the hdd, why not do a clean install of the os (erase the drive and reinstall osx snow leopard) For snow leopard you insert the osx disk, restart the machine while holding down the c key
http://support.apple.com/kb/HT3910
Message was edited by: victoryhat -
I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?
Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket. -
my iPhoto icon has a cross over it, when i open it, it You have “iPhoto” 9.2.1. you can't use this with this version of OSX? it used to work ?what's gone wrong?
iPhoto 9.2.3 is incompatible with MacOS 10.9.3 Mavericks. If you are running Mavericks on your system you need to update iPhoto to 9.5.1. Only, the problem is, that this version is no longer available at the App Store.
The easiest way to get a compatible iPhoto version in that case would be to upgrade to Yosemite, MacOS X 10.10, and then download the most recent iPhoto version from the AppStore, iiPhoto 9.6, like LarryHN suggested.
If you cannot download iPhoto after upgrading to iPhoto 9.6 post back. -
When I try to install Lion it tell's me "You can't use this version of the application install mac os x Lion with this version of Mac os X" even though I have the latest update 10.5.8 of Mac os X?
The install icon has this sign on itmoose0422 wrote:
You can't install Lion over Leopard. To install Lion, a requirement is Snow Leopard. So you can either upgrade to Snow Leopard first or you can make a bootable Lion install disc and use that to wipe your hard drive and install a fresh copy of Lion.
So to make a disk would require you to purchase Snow Leopard and upgrade to 10.6.8 so you can use the App Store, unless you have access to another computer to download it from with your Apple ID. Remember it is about a 3.4GB download.
Good Luck -
How can i use this function module
Hai
How can i use this function module /SAPHT/SALES_ORDER_READ, already apply the some parameters in this function module, but it shows the error , please tell me, how to declare the parameters in this function module ,
thanks
neelimaHi
For a particular sales order,you have to pass the order number and the item number in the sales order.
It will display the rest of the values which u can capture them using internal tables.
Regards,
Vishwa. -
i have a iphone 4,4.3.5 bought from uk i used this phone in uk,now i am in india how can i use this in another networks without jailbreak such type of softwares
Where did the phone come from as most of the UK carriers unlock phones, but the fact that you are now abroad may be a problem.
-
I purchased a iphone i USA. How can i use this iphone in india with vodafone.
I Purchased a iPhone 5s in USA. How can I use this phone in India with Vodafone.
<Edited By Host>First, the iPhone would need to be unlocked. That would depend on where you bought it. Next, the North American phone would not work with all of the networks outside of the US. Also, the warranty for the device is only good in the US, so if you have a problem with the phone, you would need to bring it back to the US to an Apple Store. Where did you purchase the phone?
-
Can i use this script in illustrator?
can i use this script in illustrator?
Newsgroup_User// This script exports extended layer.bounds information to [psd_file_name].xml
// by pattesdours
function docCheck() {
// ensure that there is at least one document open
if (!documents.length) {
alert('There are no documents open.');
return; // quit
docCheck();
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.PIXELS;
var docRef = activeDocument;
var docWidth = docRef.width.value;
var docHeight = docRef.height.value;
var mySourceFilePath = activeDocument.fullName.path + "/";
// Code to get layer index / descriptor
cTID = function(s) { return app.charIDToTypeID(s); };
sTID = function(s) { return app.stringIDToTypeID(s); };
function getLayerDescriptor (doc, layer) {
var ref = new ActionReference();
ref.putEnumerated(cTID("Lyr "), cTID("Ordn"), cTID("Trgt"));
return executeActionGet(ref)
function getLayerID(doc, layer) {
var d = getLayerDescriptor(doc, layer);
return d.getInteger(cTID('LyrI'));
var stackorder = 0;
// function from Xbytor to traverse all layers
traverseLayers = function(doc, ftn, reverse) {
function _traverse(doc, layers, ftn, reverse) {
var ok = true;
for (var i = 1; i <= layers.length && ok != false; i++) {
var index = (reverse == true) ? layers.length-i : i - 1;
var layer = layers[index];
// alert("layer.typename >>> "+layer.typename );
if (layer.typename == "LayerSet") {
ok = _traverse(doc, layer.layers, ftn, reverse);
} else {
stackorder = stackorder + 1;
ok = ftn(doc, layer, stackorder);
return ok;
return _traverse(doc, doc.layers, ftn, reverse);
// create a string to hold the data
var str ="";
// class using a contructor
function cLayer(doc, layer) {
//this.layerID = Stdlib.getLayerID(doc, layer);
this.layerID = getLayerID(doc, layer);
//alert("layer ID: " + this.layerID);
this.layerWidth = layer.bounds[2].value - layer.bounds[0].value;
this.layerHeight = layer.bounds[3].value - layer.bounds[1].value;
// these return object coordinates relative to canvas
this.upperLeftX = layer.bounds[0].value;
this.upperLeftY = layer.bounds[1].value;
this.upperCenterX = this.layerWidth / 2 + layer.bounds[0].value;
this.upperCenterY = layer.bounds[1].value;
this.upperRightX = layer.bounds[2].value;
this.upperRightY = layer.bounds[1].value;
this.middleLeftX = layer.bounds[0].value;
this.middleLeftY = this.layerHeight / 2 + layer.bounds[1].value;
this.middleCenterX = this.layerWidth / 2 + layer.bounds[0].value;
this.middleCenterY = this.layerHeight / 2 + layer.bounds[1].value;
this.middleRightX = layer.bounds[2].value;
this.middleRightY = this.layerHeight / 2 + layer.bounds[1].value;
this.lowerLeftX = layer.bounds[0].value;
this.lowerLeftY = layer.bounds[3].value;
this.lowerCenterX = this.layerWidth / 2 + layer.bounds[0].value;
this.lowerCenterY = layer.bounds[3].value;
this.lowerRightX = layer.bounds[2].value;
this.lowerRightY = layer.bounds[3].value;
// I'm adding these for easier editing of flash symbol transformation point (outputs a 'x, y' format)
// because I like to assign shortcut keys that use the numeric pad keyboard, like such:
// 7 8 9
// 4 5 6
// 1 2 3
var windowW=2048;
var windowH=1536;
this.leftBottom = this.lowerLeftX + ", " + (windowH-this.lowerLeftY);
this.bottomCenter = this.lowerCenterX + ", " + (windowH-this.lowerCenterY);
this.rightBottom = this.lowerRightX + ", " + this.lowerRightY;
this.leftCenter = this.middleLeftX + ", " + this.middleLeftY;
this.center = this.middleCenterX + ", " + this.middleCenterY;
this.rightCenter = this.middleRightX + ", " + this.middleRightY;
this.leftTop = this.upperLeftX + ", " + this.upperLeftY;
this.topCenter = this.upperCenterX + ", " + this.upperCenterY;
this.rightTop = this.upperRightX + ", " + this.upperRightY;
// these return object coordinates relative to layer bounds
this.relUpperLeftX = layer.bounds[1].value - layer.bounds[1].value;
this.relUpperLeftY = layer.bounds[0].value - layer.bounds[0].value;
this.relUpperCenterX = this.layerWidth / 2;
this.relUpperCenterY = layer.bounds[0].value - layer.bounds[0].value;
this.relUpperRightX = this.layerWidth;
this.relUpperRightY = layer.bounds[0].value - layer.bounds[0].value;
this.relMiddleLeftX = layer.bounds[1].value - layer.bounds[1].value;
this.relMiddleLeftY = this.layerHeight / 2;
this.relMiddleCenterX = this.layerWidth / 2;
this.relMiddleCenterY = this.layerHeight / 2;
this.relMiddleRightX = this.layerWidth;
this.relMiddleRightY = this.layerHeight / 2;
this.relLowerLeftX = layer.bounds[1].value - layer.bounds[1].value;
this.relLowerLeftY = this.layerHeight;
this.relLowerCenterX = this.layerWidth / 2;
this.relLowerCenterY = this.layerHeight / 2;
this.relLowerRightY = this.layerHeight;
this.relLowerRightX = this.layerWidth;
this.relLowerRightY = this.layerHeight;
return this;
// add header line
str = "<psd filename=\"" + docRef.name + "\" path=\"" + mySourceFilePath + "\" width=\"" + docWidth + "\" height=\"" + docHeight + "\">\n";
// now a function to collect the data
var isParentAvailable=false;
var prevLayerSetName="";
function exportBounds(doc, layer, i) {
var isVisible = layer.visible;
var layerData = cLayer(doc, layer);
//alert("layer.name >>> "+layer.name );
//alert("typename >>> "+layer.typename);
/*if(layer.parent.name == "ParentTest"){
for(var i in layer.parent){
alert(" III >>> "+i+"<<<layer.parent>>"+layer.parent[i]);
if(isVisible){
// Layer object main coordinates relative to its active pixels
var startStr="";
if(layer.parent.typename=="LayerSet"){
if(prevLayerSetName!="LayerSet") {
startStr="\t<parentlayer id='"+layer.parent.name+"'>\n\t";
}else{
startStr="\t";
// endStr="\t</parentlayer>\n";
prevLayerSetName=layer.parent.typename;
}else{
if(prevLayerSetName=="LayerSet"){
startStr="\t</parentlayer>\n";
prevLayerSetName="";
var positionStr=layer.name.split(".")[0].substr(layer.name.split(".")[0].length-3,layer.name. split(".")[0].length);
var assetPosition=leftTop;
if(positionStr=="L_B"){
assetPosition=leftBottom;
}else if(positionStr=="B_C"){
assetPosition=bottomCenter;
}else if(positionStr=="R_B"){
assetPosition=rightBottom;
}else if(positionStr=="L_C"){
assetPosition=leftCenter;
}else if(positionStr=="C"){
assetPosition=center;
}else if(positionStr=="R_C"){
assetPosition=rightCenter;
}else if(positionStr=="L_T"){
assetPosition=leftTop;
}else if(positionStr=="T_C"){
assetPosition=topCenter;
}else if(positionStr=="R_T"){
assetPosition=rightTop;
var str2 =startStr+ "\t<layer name=\"" + layer.name
+ "\" stack=\"" + (i - 1) // order in which layers are stacked, starting with zero for the bottom-most layer
+ "\" position=\"" + assetPosition // this is the
+ "\" layerwidth=\"" + layerData.layerWidth
+ "\" layerheight=\"" + layerData.layerHeight
+ "\" transformpoint=\"" + "center" + "\">" // hard-coding 'center' as the default transformation point
+ layer.name + ".png" + "</layer>\n" // I have to put some content here otherwise sometimes tags are ignored
str += str2.toString();
// call X's function using the one above
traverseLayers(app.activeDocument, exportBounds, true);
// Use this to export XML file to same directory where PSD file is located
var mySourceFilePath = activeDocument.fullName.path + "/";
// create a reference to a file for output
var csvFile = new File(mySourceFilePath.toString().match(/([^\.]+)/)[1] + app.activeDocument.name.match(/([^\.]+)/)[1] + ".xml");
// open the file, write the data, then close the file
csvFile.open('w');
csvFile.writeln(str + "</psd>");
csvFile.close();
preferences.rulerUnits = originalRulerUnits;
// Confirm that operation has completed
alert("Operation Complete!" + "\n" + "Layer coordinates were successfully exported to:" + "\n" + "\n" + mySourceFilePath.toString().match(/([^\.]+)/)[1] + app.activeDocument.name.match(/([^\.]+)/)[1] + ".xml");
Maybe you are looking for
-
Windows XP, Office 2007, Adobe Pro 9. PDF printer previously functioned without issue. System has recently had fresh OS installed. When "Save As" is selected, the mapped network drive that is available to Windows is not available as a part of the dr
-
Posting Intercompany Vendor invoice
Hi All, While posting the intercompany vendor invoice via VF01 the Idoc generated by RD04 output is errored out with the below error: Field BSEG-MWSKZ . does not exist in the screen SAPMF05A 0302 Please advice...... Rgds Prasad
-
Please review my network configuration.
I am having some problems with my network which may be malicious. My router DHCP is assinging hosts at local IP's that don't seem to exist. I'm not looking for direct solutions to this mystery right now, rather I would like some of you to take a look
-
Brand New Mac Mini drops network after a few minutes
My new Mac Mini (Core Duo) arrived a couple of days back and I couldn't wait to set it up. The next thing I did was to download all the latest updates but the network connection kept dropping after a few minutes (seemingly randomly). This is the wire
-
&RNT_PREV ( ALV GRID USING Classes )
Hi, I am using the above function code to display print preview . I am able to display that successfully, but the 'Question' I have here is Can i customize the Print Preview. For Example if i have 10 rows in the Data and i select a Few rows and displ