Can I use thumbnails rather than the {sitename} to load different galleries?

Hi all-
I'm new to Spry and all things Javascripting but I'm attempting to construct a image gallery using Spry in Dreamweaver CS3. I've used the "Original Photo Gallery" from the Spry Demo folder as a jumping off point and everything works correctly.
I would like to know if it is possible to use representative thumbnails rather than the select dropdown to launch the different galleries? I'm sure it is, but I'm a total neophyte and have no idea what to do. I'd like to set up a AP Div with 9 thumbnails in a table that would each launch a different gallery. How do I do that?
Jimmy

Hello, because you're SELECTing tournament.tourtype in the SELECT list, the answer is not really. If you didn't need t.tourtype in the SELECT list, you could have:
select m.memberid, m.lastname, m.firstname
from member m
where exists (select 1
        from entry e inner join tournament t on (e.tourid=t.tourid)
        where m.memberid=e.memberid
            and upper(t.tourtype)='OPEN');And you know the t.tourtype is 'OPEN' anyway, so you don't need to SELECT it. So you could have this, and the answer is yes:
select m.memberid, m.lastname, m.firstname, 'OPEN' tourtype
from member m
where exists (select 1
        from entry e inner join tournament t on (e.tourid=t.tourid)
        where m.memberid=e.memberid
            and upper(t.tourtype)='OPEN');Edited by: SeánMacGC on May 7, 2009 2:09 AM

Similar Messages

  • Can I use CS4 rather than flex to program with stratus?

    Yeah it is all as3, but I need to know since it said "Flex or Flexbuild" which scares me. Can I use Stratus with flash cs4?

    I can.
    So I think you can too, just try.
    UPD: ando also try this http://forums.adobe.com/thread/26104

  • Mail - why does it use Firefox rather than the default, Safari?

    Hi,
    I have both Safari and Firefox on this iMac that's running 10.6.8.  Safari is my default browser.
    Within Mail Preferences, the Default RSS Reader is set up to use Safari.  However,  Mail always links to Firefox.  Why is this and how do I change it?
    Thank you,
    reluctantuser

    Nevermind, I've figured it out!
    Thanks,
    reluctantuser

  • How can I make ringtones show in my Tones tab rather than the Music tab?

    I just bought my first iPhone 4 and uploaded a bunch of music ringtone files to iTunes and changed the default preference to display the Tones tab. However, the ringtones all got added to the Music tab rather than the Tones tab. I have a number of questions:
    I'm used to other phones where any music file can be set as a ringtone for a particular contact. Is this the case for iPhones too?
    If so, how can I set a ringtone for a contact from these music files?
    If not, how can I get the ringtones to appear in the Tones tab? I assume that I would have to do that to sync ringtones to my iPhone ringtone "folder".
    Is there another alternative? I read on the forum something about dragging ringtone files to the iPhone. Not sure I understood that! Does this mean I can drag a music file from the Music tab to the iPhone icon and have that file end up in the iPhone ringtone "folder"? If it ends up in the Music "folder", how do I access it to set it as a contact ringtone?
    Thank you for any light you can shed on this.

    It would be good if this was made a user-defined Option (Tools -> Options -> Tabs) in the next update of Firefox rather than having to install an add-on. I currently keep Firefox open to view my Accuweather.com add-on running or because I know that I will be returning to Firefox in short order. (I do close Firefox if I have visited a sensitive or secure site to ensure better security.) Every time I want to go to a bookmark, I must open a new "(Untitled)" tab before selecting my bookmark using the keyboard (I'm a dedicated keystroker; it's much faster for me). This way, when I close the website, I have an "(Untitled)" tab displaying so that Firefox doesn't close. Why can't I set an Option parameter that will result in me not having to go through this? Alternatively, allow users to set an option to keep Firefox loaded and open in the event only one tab is open and maybe if only one Firefox application window is running (I avoid having more than one Firefox window open as much as possible). I've addressed this last issue in the past but have seen no change when one closes the last tab in a Firefox window. As general practice, I would think that Firefox would run better if options, like I have described above, were part of the Firefox application code and not given to needing an add-on which may cause instability in Firefox as they have in the past, even with author verification and certification.

  • I presently use iCloud and run a laptop PC plus an iPad2 and an iPhone 4.  I plan to travel and want to take my netbook, rather than the laptop PC for travelling.  How do I get my apple tools to work mwith a new, temporary PC?

    I presently use iCloud and run a laptop PC plus an iPad2 and an iPhone 4.  I plan to travel and want to take my netbook, rather than the laptop PC for travelling.  How do I get my apple tools to work mwith a new, temporary PC?

    ayorico15 wrote:
    It's not the pictures I'm worried about. I can get them off my phone without iTunes. 
    You can export ONLY Camera Roll photos and videos.
    ayorico15 wrote:
    All my apps were downloaded from my new apple ID. Not his.
    Sign in to iTunes Store (on desktop itunes) with your ID. Plug your iphone to itunes, right click on it and choose transfer purchases.Right click again and choose backup. Then you can sync with iTunes.
    ayorico15 wrote:
    It's not the pictures I'm worried about.  It's all my saved conversations
    Your conversations will not deleted if you sync with your iTunes.
    What is the problem with iCloud? iCloud has nothing to do with iTunes syncing.

  • How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

    How can I create a slideshow that depicts only a version of a photo rather than the original?   Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

    There are two things we use the name "Slideshow" for in Aperture:  a Slideshow Album, used for making Slideshows, and the Slideshow that is made.  (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
    The Slideshow will use the Album Pick from any Stack.  A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack.  This makes it the Stack Pick, and will be the default Album Pick.  If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album.  Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick".  (Note the keyboard shortcut; there is also a Toolbar icon for this.)  The change is immediate.  The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

  • How do I download a campaign font for use in iBooks Authoring rather than the standard fonts available?

    Is it possible to use a campaign font when authoring an iBook rather than the standard font menu?

    The font menu in the toolbar includes supported iOS fonts on the iPad. You are obligated to work with those fonts only.
    While apps have a way to add additional fonts, iBooks Author does not provide support otherwise, sorry.
    As an alternative, you can use any font you like and generate an image instead.

  • I am setting up ipads for use in an elementary, and I would like the "home screen" to be the apps, rather than the default with the chat, mail, etc icons.  how do I change that?

    Can anyone answer this question?
    I am setting up ipads for use in an elementary, and I would like the "home screen" to be the apps, rather than the default with the chat, mail, etc icons.  how do I change that?

    Depending on exactly what you want to do, there are a couple of ways of handling this. You may want to access teh user guide for some ideas: http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
    In particular, check the sections on Customizing iPad and Settings > Restrictions.

  • How can i have bookmarks automatically in a new tab rather than the tab i am in when i select a bookmark?

    How can I get book marks to automatically open in a new tab rather than the tab I am in when I select the bookmark?

    It would be good if this was made a user-defined Option (Tools -> Options -> Tabs) in the next update of Firefox rather than having to install an add-on. I currently keep Firefox open to view my Accuweather.com add-on running or because I know that I will be returning to Firefox in short order. (I do close Firefox if I have visited a sensitive or secure site to ensure better security.) Every time I want to go to a bookmark, I must open a new "(Untitled)" tab before selecting my bookmark using the keyboard (I'm a dedicated keystroker; it's much faster for me). This way, when I close the website, I have an "(Untitled)" tab displaying so that Firefox doesn't close. Why can't I set an Option parameter that will result in me not having to go through this? Alternatively, allow users to set an option to keep Firefox loaded and open in the event only one tab is open and maybe if only one Firefox application window is running (I avoid having more than one Firefox window open as much as possible). I've addressed this last issue in the past but have seen no change when one closes the last tab in a Firefox window. As general practice, I would think that Firefox would run better if options, like I have described above, were part of the Firefox application code and not given to needing an add-on which may cause instability in Firefox as they have in the past, even with author verification and certification.

  • My iPhone has suddenly started sending emails in Courier New (rather than the standard Arial).  They appear in Arial when I compose them, but turn to Courier new in the sent folder and when displayed to the recipient.  I use Yahoo Mobile Mail.  Help!

    My iPhone has suddenly started sending emails in Courier New (rather than the standard Arial).  They appear in Arial when I compose them, but turn to Courier new in the sent folder and when displayed to the recipient.  I use Yahoo Mobile Mail.  Help!  How can I change the settings so that the sent emails go back to Arial?  Thank you!

    I'm not sure if it's a Yahoo Mobile mail or an iphone issue... have asked the Yahoo forum but no replies yet...  Any help appreciated!

  • When recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?

    when recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?

    when recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?
    The basic answer is that Apple has not programmed the capture routine with this capability. As such, you can always send QT feedback requesting this feature be added as a future enhancement.

  • Why use Protected Overide Sub OnPaint rather than the standard Paint_Event ?

    I notice many good programmers use this following method rather than the usual Paint_Event when painting to the form.
    Protected Overrides Sub OnPaint(e As PaintEventArgs)
    Dim g As Graphics = e.Graphics
    g.SmoothingMode = Drawing2D.SmoothingMode.HighQuality
    g.InterpolationMode = Drawing2D.InterpolationMode.HighQualityBicubic
    MyBase.OnPaint(e)
    End Sub
    Can anybody share the reasons why? Thanks 
    Top Tip: Toothache? Cut paper towel to 2"square. Smear with olive oil. Sprinkle on Cayenne Pepper. Fold over few times to form small wad. Tuck in between wall of mouth and gum. Leave 1 - 2 hrs. You will thank me!

    OK Crazypennie, maybe you are right. I tend to rant on a bit sometimes.
    Also, maybe the jumpy graphics is made worse because the animation output is not synced with the video hardware refresh rate. We can get around that slightly by using a very high fps. 
    Hi Leon,
    I tried modifying your code using a GraphicsFrame class that I wrote a little while back, the class utilizes the bufferedcontext/bufferedgraphics, instead of using the forms graphics directly. In theory, all objects should be rendered to the buffer before
    the forms graphics object. Is this less glitchy/faster on your pc? It seemed less glitchy/faster on mine..., and previous benchmarks show that using buffered graphics in this manner improved render time.
    You can read the discussion on
    this thread.
    Option Strict On
    Option Explicit On
    Option Infer Off
    Public Class Form11 ' drawing Code by Paul Ishak Apr 2015 A spinning pie chart. My timing code.
    Private Angle As Single = 100
    Private NextIncrement As Single = 1
    Private Randomizer As New Random(Now.Millisecond)
    Private SliceColors As New List(Of Color)
    Private SlicesOnWheel As Integer = 24
    Private Velocity As Single = 0
    Private WheelRadius As Integer = 300
    Private WheelLocation As New Point(50, 50)
    Private SW As New Stopwatch
    Private SFlag As Boolean ' wheel is currently spinning
    Private CntMS As Integer ' count the milliseconds
    Protected Overrides Sub OnPaint(e As PaintEventArgs)
    Dim gFrame As New GraphicsFrame(e.Graphics, Me.ClientRectangle.Size)
    Dim g As Graphics = gFrame.Graphics
    g.SmoothingMode = Drawing2D.SmoothingMode.HighQuality
    g.InterpolationMode = Drawing2D.InterpolationMode.HighQualityBicubic
    g.Clear(Me.BackColor)
    Dim sliceAngle As Single = CSng(360 / SlicesOnWheel)
    Dim rect As New Rectangle(WheelLocation, New Size(WheelRadius, WheelRadius))
    Dim curveWidth As Integer = CInt(WheelRadius - (WheelRadius / (2.0! * 0.9)))
    Dim rect2 As New Rectangle(rect.Left + curveWidth, rect.Top + curveWidth, rect.Width - curveWidth * 2, rect.Height - curveWidth * 2)
    Dim inc As UInteger = UInteger.MaxValue \ 360
    For I As Single = 0 To 359 Step sliceAngle
    g.FillPie(New SolidBrush(SliceColors(CInt(I / sliceAngle))), rect, I + NormalizeAngle(Angle), sliceAngle)
    g.DrawPie(Pens.White, rect, I + NormalizeAngle(Angle), sliceAngle)
    Next
    g.FillEllipse(Brushes.Black, rect2)
    g.DrawEllipse(Pens.White, rect2)
    g.DrawEllipse(Pens.White, rect)
    MyBase.OnPaint(e)
    If SFlag Then
    If Me.Text = " " Then Me.Text = "" Else Me.Text = " "
    End If
    gFrame.Render()
    gFrame.Dispose()
    MyBase.OnPaint(e)
    End Sub
    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles btnSpin.Click
    If Not SFlag Then
    Velocity = Randomizer.Next(3, 5)
    NextIncrement = Velocity
    SFlag = True
    CntMS = 0 : SW.Reset() : SW.Start()
    If Me.Text = " " Then Me.Text = "" Else Me.Text = " "
    End If
    End Sub
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
    Me.DoubleBuffered = True
    SliceColors.Add(Color.Black)
    SliceColors.Add(Color.LightBlue)
    SliceColors.Add(Color.SeaGreen)
    SliceColors.Add(Color.Yellow)
    SliceColors.Add(Color.Red)
    SliceColors.Add(Color.LightBlue)
    SliceColors.Add(Color.Orange)
    SliceColors.Add(Color.Violet)
    SliceColors.Add(Color.Yellow)
    SliceColors.Add(Color.Black)
    SliceColors.Add(Color.Green)
    SliceColors.Add(Color.Black)
    SliceColors.Add(Color.Green)
    SliceColors.Add(Color.Red)
    SliceColors.Add(Color.Blue)
    SliceColors.Add(Color.SeaGreen)
    SliceColors.Add(Color.Pink)
    SliceColors.Add(Color.Black)
    SliceColors.Add(Color.Purple)
    SliceColors.Add(Color.SkyBlue)
    SliceColors.Add(Color.Aqua)
    SliceColors.Add(Color.White)
    SliceColors.Add(Color.Red)
    SliceColors.Add(Color.Blue)
    SliceColors.Add(Color.Pink)
    SliceColors.Add(Color.SeaGreen)
    SliceColors.Add(Color.Orange)
    ClientSize = New Size(375, 375)
    Me.Show()
    btnSpin.Refresh()
    End Sub
    Public Function NormalizeAngle(value As Single) As Single
    Return value Mod 360.0!
    End Function
    Private Sub Form11_TextChanged(sender As Object, e As EventArgs) Handles Me.TextChanged
    If Not SFlag Then Exit Sub
    Angle = NormalizeAngle(Angle + NextIncrement)
    NextIncrement = CSng(NextIncrement - 0.0033)
    If NextIncrement <= 0.0033 Then
    SFlag = False : SW.Stop() : Exit Sub
    End If
    Invalidate()
    CntMS += 5 ' <<< set timer interval here <<<
    Do Until SW.ElapsedMilliseconds > CntMS
    Loop
    End Sub
    End Class
    Public Class GraphicsFrame
    Implements IDisposable
    Private disposedValue As Boolean
    Private BackBuffer As System.Drawing.BufferedGraphics = Nothing
    Public ReadOnly Property Graphics() As System.Drawing.Graphics
    Get
    Return Me.BackBuffer.Graphics
    End Get
    End Property
    Public Sub New(ByVal canvas As System.Windows.Forms.Control)
    BufferedGraphicsManager.Current.MaximumBuffer = New Size(canvas.ClientRectangle.Width + 1, canvas.ClientRectangle.Height + 1)
    Me.BackBuffer = BufferedGraphicsManager.Current.Allocate(canvas.CreateGraphics, New Rectangle(0, 0, canvas.ClientRectangle.Width, canvas.ClientRectangle.Height))
    End Sub
    Public Sub New(ByVal canvasGraphics As Graphics, maximumBuffer As Size)
    BufferedGraphicsManager.Current.MaximumBuffer = New Size(maximumBuffer.Width + 1, maximumBuffer.Height + 1)
    Me.BackBuffer = BufferedGraphicsManager.Current.Allocate(canvasGraphics, New Rectangle(0, 0, maximumBuffer.Width, maximumBuffer.Height))
    End Sub
    Public Sub New(ByVal handle As IntPtr, maximumBuffer As Size)
    BufferedGraphicsManager.Current.MaximumBuffer = New Size(maximumBuffer.Width + 1, maximumBuffer.Height + 1)
    Me.BackBuffer = BufferedGraphicsManager.Current.Allocate(Graphics.FromHwnd(handle), New Rectangle(0, 0, maximumBuffer.Width, maximumBuffer.Height))
    End Sub
    Public Sub New(ByVal canvas As Image)
    BufferedGraphicsManager.Current.MaximumBuffer = New Size(canvas.Width + 1, canvas.Height + 1)
    Me.BackBuffer = BufferedGraphicsManager.Current.Allocate(Graphics.FromImage(canvas), New Rectangle(0, 0, canvas.Width, canvas.Height))
    End Sub
    Public Sub New(ByVal canvas As Bitmap)
    BufferedGraphicsManager.Current.MaximumBuffer = New Size(canvas.Size.Width + 1, canvas.Size.Height + 1)
    Me.BackBuffer = BufferedGraphicsManager.Current.Allocate(Graphics.FromImage(canvas), New Rectangle(0, 0, canvas.Width, canvas.Height))
    End Sub
    Public Sub Render()
    If Not BackBuffer Is Nothing Then BackBuffer.Render()
    End Sub
    Protected Overridable Sub Dispose(disposing As Boolean)
    If Not Me.disposedValue Then
    If disposing Then
    Me.BackBuffer = Nothing
    GC.Collect()
    End If
    End If
    Me.disposedValue = True
    End Sub
    Public Sub Dispose() Implements IDisposable.Dispose
    Dispose(True)
    GC.SuppressFinalize(Me)
    End Sub
    End Class
    Don't forget to vote for Helpful Posts and
    Mark Answers!
    *This post does not reflect the opinion of Microsoft, or its employees.

  • What are the implications of using jquery version 1.10.2 rather than the version (1.7.1) that Adobe

    What are the implications of using jquery version 1.10.2 rather than the version (1.7.1) that Adobe uses? Thanks
    Bob

    I am having trouble when my Edge Animate composition (banner ad) appears on a web page that uses jquery version 1.8.23. Some of the functionality of the host page no longer works. This occurs only when my composition is present & the functionality returns when another ad is displayed (either a Flash ad or a gif). It happens in Chrome Version 31.0.1650.63 m, Chrome Version 33.0.1738.0 canary & IE 11.
    I had edited my Edge Animate files to use the Adobe CDN option & to point to another server (mine) so only the html file was needed to be placed in the ad rotator & on the host's server. I now have edited them again to include the Google CDN locations for version jquery 1.10.2 (http://ajax.googleapis.com/ajax/libs/jquery/1.10.2/jquery.min.js). I am waiting for the host site to try this updated html file. When I visit just this new page & the old one that pointed to 1.7.1 for that matter, it works fine.
    Thank you for taking the time to read and answer my message.
    Bob

  • I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

    I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

    Which iBook do you have?
    http://support.apple.com/kb/HT1772?viewlocale=en_US
    Which version of the OS is installed, and which version are you trying to install?
    You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

  • [svn:bz-trunk] 17772: Update the url in the tests to use a relative path instead of the default localhost : 8400 so that the tests can pass on appservers other than the default Tomcat .

    Revision: 17772
    Revision: 17772
    Author:   [email protected]
    Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
    Log Message:
    Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

    Revision: 17772
    Revision: 17772
    Author:   [email protected]
    Date:     2010-09-20 15:02:50 -0700 (Mon, 20 Sep 2010)
    Log Message:
    Update the url in the tests to use a relative path instead of the default localhost:8400 so that the tests can pass on appservers other than the default Tomcat.
    Modified Paths:
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationFalseTest/Remoting_NetConnectionTest.mxml
        blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/EnforceEndpointValidation/Enforc eEndpointValidationTrueTest/Remoting_NetConnectionTest.mxml

Maybe you are looking for