Can I use thunderbolt to retrieve old data?

A few weeks ago my MacBook Pro wouldn't boot. I took it to the nearest apple store and they said they had to reformat my macbook's inner hard drive. With no other solution I gave them my MacBook. When I got it back they told me it has been formatted and updated to mavericks and they could only save some documents but none were important. I tried using DiskDrill and other softwares, though they did find all my pictures, documents, etc, I couldn't retrieve them as in the end I have to buy the software. So I was wondering, if the softwares did find the old data, can't I use a thunderbolt to connect my mac to another and retrieve the data?
Thank you

Sansouf wrote:
can't I use a thunderbolt to connect my mac to another and retrieve the data?
Thunderbolt is a data transmission protocol, it is not a data restoration application. If the 'another' you mention is a Mac with your data, you may use Thunderbolt or any other connection protocol to transfer data (such as Firewire or USB).
Ciao.

Similar Messages

Can i use one interface to load data into 2 different tables

Hi Folks,
Can i use one interface to load data into 2 different tables(same schema or different schemas) from one source table with same structure ?
Please give me advice
Thanks
Raj
Edited by: user11410176 on Oct 21, 2009 9:55 AM

Hi Lucky,
Thanks for your reply,
What iam trying is ...Iam trying to load the data from legacy tables(3) into oracle staging tables.But i need to load the same source data into two staging tables(these staging tables are in two different schemas)
can i load this source data into two staging tables by using single standard interface(some business logic is there)
If i can then give me some suggestion how to do that
Thanks in advance
Raj

Can we use impdp to import the data from an normal exp dump?

Hi All,
I have a export dump taken from a 9i database. Can i use impdp to import the data into 10g database from that 9i exp dump?
Please suggest
thanks and Regards
Arun

Hi,
I have a export dump taken from a 9i database. Can i use impdp to import the data into 10g database from that 9i exp dump?Yes, it can be.
Refer:
http://wiki.oracle.com/thread/3734722/can+a+9i+dump+file+be+imported+into+10%3F
thanks,
X A H E E R

How can I use Automator to extract specific Data from a text file?

I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE    memory (+                68 range fill )
16 789
bytes of DATA    memory (+    59 absolute )
1 875
bytes of XDATA   memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!

Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
#     CSV spec
#     - record separator is CRLF
#     - field separator is comma
#     - every field is quoted
#     - text encoding is UTF-8
local $\\ = qq(\\015\\012);    # CRLF
local $, = qq(,);            # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
    my $f = shift @ff;    # file path
    if ( ! open(IN, '<', $f) ) {
        warn qq(Failed to open $f: $!);
        next;
    $f =~ s%^.*/%%og;    # file name
    @dd = ('', $f, '', '', '', '');
    while (<IN>) {
        chomp;
        $dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
        ($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
        ($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
        ($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
        ($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
        last unless grep { /^$/ } @dd;
    close IN;
    print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H

Can I use Bridge to export image data into a .txt file?

I have a folder of images and I would like to export the File Name, Resolution, Dimensions and Color Mode for each file into one text file. Can I use Bridge to export image data into a .txt file?

Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
#     CSV spec
#     - record separator is CRLF
#     - field separator is comma
#     - every field is quoted
#     - text encoding is UTF-8
local $\\ = qq(\\015\\012);    # CRLF
local $, = qq(,);            # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
    my $f = shift @ff;    # file path
    if ( ! open(IN, '<', $f) ) {
        warn qq(Failed to open $f: $!);
        next;
    $f =~ s%^.*/%%og;    # file name
    @dd = ('', $f, '', '', '', '');
    while (<IN>) {
        chomp;
        $dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
        ($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
        ($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
        ($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
        ($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
        last unless grep { /^$/ } @dd;
    close IN;
    print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H

HT4614 Can I use Thunderbolt to Thunderbolt cable to copy from one macbook air to another?

Can I use Thunderbolt cable to copy from one Macbook Air to another Macbook Air?

Of course, but you will have to start one of the Macs into Target Disk Mode, pressing T key while the Mac is starting with the Thunderbolt cable connected, so the MacBook Air in Target Disk Mode will appear on the Finder sidebar of the other Mac as an external disk, so you can copy and transfer files from and to it

Can I use thunderbolt display to play xboxone?

Can I use thunderbolt display to play xboxone? I just do not want to buy another TV, thanks .

Shoot. I was afraid of that. Have you ever done anything so stupid!!!?
Thanks so much for the response. I'll try to dig another up. An expensive klutz move.

Can we use LSMW to load Transaction data

Hi.
Can we use LSMW to load transactional data.Or it is used only for Master Data.
With Best Regards
Mamatha

Hi,
you can do upload of transactional data using,
Standard Programs,
Batch Input Recording,
BAPI method,
IDoc,
best regards,
Thangesh

HT4108 can I use my IPAD with a data projector? and does the data projector have to be an iOS compatible one?

can I use my IPAD with a data projector? and does the data projector have to be an iOS compatible one?

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
Apple - AirPlay - Play content from iOS devices on Apple TV
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
iOS: About Apple Digital AV Adapters
http://support.apple.com/kb/ht4108
 Cheers, Tom

Can we create TDMS file using C# and retrieve the data using a diadem

I want to write a tdms file from a dot net application and to use the diadem to retrieve the data and to create a user defined report

Hello,
If you want this kind of output, you can use Java Mapping e.g
1. Create your data type like this:
CHARSET 0..1
LOADMODE 0..1
CODEFORMAT 0..1
CURRENCY 0..1
SUPPLIERID_DOMAIN 0..1
ITEMCOUNT 0..1
TIMESTAMP 0..1
UNUOM 0..1
COMMENTS 0..1
FIELDNAMES 0..1
DATA 0..unbounded
ENDOFDATA
2.In your message mapping assign all the constants. You might want to concat all the values of the FIELDNAMES and output them to DATA
3.In your Java Mapping, replace all the XML fields including ,, with ,''',
4.In ID, do not use FCC.
Hope this helps,
Mark

What Function Module can be used to create vendor master data in SAP R/3?

Hello -
I've been trying to find a standard SAP delivered BAPI that can be used to create vendor master records in ECC 6.0. Up to this point I have not been able to do so. With SAP MDM solutions and SRM solutions it seems logical that SAP would deliver a standard BAPI that can be used to create vendor master records in the ERP/R3 environment (similar to the BAPI_MATERIAL_SAVEREPLICA for creating material master data records).
I have been able to find BAPI_VENDOR_CREATE but this only calls the online transaction and does not offer much additional functionality beyond what transaction code XK02 already offers.
The next best alternative appears to be IDOC_INPUT_CREDITOR but our preference would be to not use IDOCs for the project we are working on.
Can anyone offer any insight or personal experience on how vendor master records have been successfully interfaced with SAP R/3? Did you have to use IDOCs or create a custom RFC call? Thanks for the help!
Rich Wortmann
<< Personal information removed >>
Edited by: Rob Burbank on May 14, 2009 10:43 AM

Quite a gap in the BAPI arsenal. I think the options are IDoc, which you don't want, good old program RFBIKR00 (requires flat file for input, can be used via LSMW) or DIY (very complex).
Thomas

No bootable device message - can I reboot temporarily to retrieve valuable data?

Hi. Turned on my Presario CQ61-110SA notebook this morning and after a bit of bleeping I'm confronted with the 'No bootable devic - insert boot disk and press any key' message.
I went through the various F10 diagnostics, but no joy - the system doesn't recognise a hard drive. Then, following the handbook advice, I carefully took out the hard drive and replaced it (three times!) in case it had disconnected. Again, no joy.
Now, I have recovery disks from way back when I first got the computer, but I don't want to use those yet - there's valuable information on the hard drive that I really don't want to lose.
So, my question is this: is there another way of fixing this or at least of temporarily rebooting the computer (using the first recovery disk???) so that I can retrieve the data after which I can reset with the recovery disks?
P.s. I'm using Vista

Reboot, hold the option key down at the sound of the chime, release it when the start manager appears. Select OSX.

Can i use OER to store the data from a excel sheet that pertains to the entire integrations ?

hi ,
i know that the OER can be used to view the entire landscape for the SOA composites and how they are related with each other. However we have a requirement wherein we need to store the data for the entire integration end systems e.g. ebiz, mfgpro, siebel etc ( that is we need to store data one level up).
Also, we want a customized form in OER wherein user can manually add data regarding the integrations.
So is it possible to do so ? If yes, how ?

ok, let me put it this way,
I tried using the import/export utility available under OER admin tab.
When i export my existing assets it generates the .xml file for each asset. Now as i have hundreds on new assets to be created for each asset type i want to be able to create a new .xml file and want it to create the new asset once i import it using import utility. I tried creating a new .xml file giving it a new UUID but it does not seem to work. Has anyone tried this earlier who can give the steps to do this ?

Help Required -- Can we use SQL Query to READ data from SAP MDM Tables

Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
Regards

All the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok

How can I use table control to enter data

Hi all,
I want to use table control to enter data, instead of using textboxes.
So that the user can enter many data at once and just click the save button at the end of the work, only one click.
How can I use the table control at this context?
Thanks.
Deniz.

Hi deniz,
go through it:
/people/ravishankar.rajan/blog/2007/02/23/an-easier-way-of-displaying-and-editing-data-using-table-control
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/code%2bto%2bhandle%2bmultiple%2brecords%2bin%2bbdc%2btable%2bcontrol
Regards,

Can I use thunderbolt to retrieve old data?

Similar Messages

Maybe you are looking for