Can I use Time Capsule and keep my Telstra router for connection to the internet?

Can I use Time Capsule without changing, to keep my Telstra router for conection to the internet?

You can either bridge the TG or the TC.
For the TC.. I explained it in the previous post.. and it is posted again and again and again.
For the TG782T.. open it directly from a pc.. select configuration wizard and choose bridge.. it is as easy as that.
Then setup pppoe client for the TC with your Telstra username and passwork.
Post again in Whirlpool forum if you have issues.
Either dsl hardware or bigpond.

Similar Messages

  • Can I use Time Capsule and LaCie at the same time?

    Can I use Time Capsule and LaCie at the same time?

    stephaniefromarlington wrote:
    Before I answer your questions, let me first just say thank you so much for your amazing patience and helpfulness.  Whether or not we get to the bottom of this, I am very, very grateful to you. 
    We will get to the bottom of it, and you're quite welcome.  Don't feel you ought to know all this stuff -- none of us were born with it!
    By the way, in answer to your original question, yes, you can use the Time Capsule while backups are running. There's no conflict at all.
    1)  Estimated size of full backup:  205.94 GB
    2)  My LaCie has available:  11.04 GB of 359.95 GB
    That's part of the problem right there; 360 GB is a bit small to back up 206 GB.  Ordinarily, a Time Machine drive should be 2-3 times the size of the data it's backing-up, so Time Machine can keep a reasonable "depth" of old backups for you.
    It looks like Time Machine is trying to do a fairly large backup, and there just isn't enough room for it.
    But something doesn't quite add up.  Time Machine should have deleted all but your most recent backup, trying to make room for the new one.  But that would mean there should only be a bit less than 206 GB on the disk, not 360.
    A clue may be lurking in your logs.  Use the widget in #1 of Time Machine - Troubleshooting to display the backup messages from your logs.  Locate the backup in question, then copy and post all the messages here.

  • Time capsule won`t allow multiple devices to connect to the internet

    I`ve got a 2TB time capsule that worked fine.
    I moved to this condo where the is already a wired internet service available to each apartment. The access is made through a login and password whenever You open you browser, if connected directly on the WAN cable. No multiple logs are allowed.
    When I used my Time Capsule to create a wi-fi network and serve as a router I could access the internet on my MacBook over the wi-fi just created. No problem at all. But whenever I try to log other devices (iphone, apple tv) it asks for my ap login and password, and of course it states that there`s already an active connection to that user and won`t grant me access.
    I`ve then borrowed a tp-lynk router from a friend of mine, created a wi-fi network (without the time capsule on it), it asked for the log in and all but then everything worked fine and I could use all my devices through this network.
    Back to the time capsule, I`ve tried different settings. First one was bridge mode, but it didn`t work. Tried DHCP & NAT but had the double NAT issue.
    Also I`ve tried this solution https://www.autoitconsulting.com/site/networking/configuring-an-airport-extreme- for-nat-only-mode/
    but it would`t work either.
    My guess is that somehow Time Capsule is attributing different IP addresses to each device that enters the Wi-Fi network, and that`s the reason I can`t access the net, since the service provider won`t allow more than one connection. On the other hand TP-Lynk was able to connect to the internet service through one IP address and then connect to other devices.
    Any idea on how to solve this issue?

    Tried DHCP & NAT but had the double NAT issue.
    If you got the TC working and had double NAT .. sorry but the TP-Link is exactly the same.. you cannot distribute a single IP without double NAT.. the TC tells you it is a problem.. the TP-Link doesn't.. otherwise there is no difference.
    But it is important the double NAT is setup right.. ie you must use different ranges.. please tell us the IP you get from a directly connected computer..
    If it is 10.x.x.x then you should move the TC to 192.168. rather than default IP of 10.0.1.1 .. the TP-Link already will use 192.168.x.x. which might also explain why it works better.

  • Can you stream iTunes library from Time Capsule to a MacBook if you're connected to the internet anywhere in the world?

    I want to buy a MacBook Air but the flash storage means not enough space for all my movies and music. Instead of carrying around an extra harddrive, I'd rather make the Time Capsule my external harddrive. Most of the time when I access it it will be from my house, but say I'm just out and about and connected to the internet...assuming my Time Capsule is on, can I use it as basically a cloud device and stream my iTunes movies and music to my computer?

    Probably not unless you have a super speed internet connection.. most people on adsl have 1mbit upload connection or less. you cannot stream movies over 1mbit.. I doubt you can even stream music. Actual throughput is only 800kbit/s...
    That is why you store things in the cloud.. you download speed from cloud is much high than upload to it.
    That is unless you have a super high speed, fibre connection to your home??
    It is certainly possible.. if you have enough bandwidth.. 99.999% of people don't.

  • My time capsule will allow only one machine to connect to the internet at a time. Connection sharing is "off" on the Airport Utility. When I try to share an IP address I get the message that "DHCP range that I entered conflicts with the WAN IP address" I

    Suddenly, my time capsule will not allow more than one computer to connect to the internet at a time. On the Airport Utility on the internet tab, Connection Sharing is "Off (Bridge Mode)" When I try to change it to sharing an IP address, I get two messages that the beginning and ending DHCP addresses that the DHCP addresses I've entered conflict with the WAN address of my Apple wireless device."
    Any ideas?
    Thanks

    I use a DSL to connect to the internet. The modem is a Westell C90-810030-06. Two things happened in connection with the fail. I upgraded the firmware in both my Time Capsule (connected to the DSL) and the Airport Extreme (connected to my printer--used to extend the network). I also upgraded my Colof Nook to the Android Faux Tablet version. I can't imagine that that is creating some sort of mismatch.
    I have now downgraded the firmware on the Time Capsule to 7.4.1 which is what I had before. Fortunately, I found the trick to downloading the older airport utility to find the older firmware. All the older versions disappeared from my computers.
    I still have the same problem. Wifi works fine. If a second device connects to the wifi, then it works fine, but the first no longer has a connection.
    And my Airport Extreme is not working at all. It cannot be seen by the computer. I tried resetting it. I'm going to connect it by ethernet and downgrade the firmware on it.
    I appreciate any help. This is so frustrating.

  • IMessage will not let me in and keeps saying I'm not connected to the internet when I am

    Imessage will ill not let me in and keeps saying I'm not connected even though I am.

    1. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
    2. Make sure phone number or email address is correct
    3. Restart iPad

  • Why are all my devices acknowledging my wireless network through my time capsule, but only one is able to connect to the internet?

    This started when I changed the port for cable modem access.  If I shut everything down- router, MacBook, and iPhone and restart the router... the device I turn on first will connect to the internet.  The second device will read the wireless network but if you attempt to connect to the internet- it states no internet connection is available.  Is this a security feature I enabled unknowingly?  Very frustrated.

    You are using your TC in the wrong way.. in bridge and it has to be in router mode.
    Simply make sure you connect SB5100 to the WAN port of the TC.
    Go to the airport utility, manual setup, internet tab on the bottom and choose connection.. ethernet.. and down the bottom connection sharing.. share a public IP.. sorry I don't have the exact wording as my TC is in pieces being fixed.
    Update and then shut off everything again, particularly the modem.. start everything in order.. modem.. wait 2min.. then TC.. wait 2min then all the computers .. they will get an IP from the TC. With correct address and gateway.
    What was happening is the first device to turn on was capturing the one and only public IP. The rest get local IP without connection.

  • Can I use time capsule as nas attached to another wireless router?

    my 4 year old time capsule was starting to drop it's connection to the internet intermittently.  so I decided to buy a new linksys ea4500 and that's now setup as my main wireless router.  can I still salvage my time capsule by attaching it to the new linksys router, using ethernet cable, and using it as a NAS drive?  my purpose is to continue using the time capsule as a NAS hdd for time machine backups.
    I read somewhere that the time capsule cannot be set up in client mode, so does this mean I can't attach it to non-apple wireless routers?
    thanks in advance to anyone who helps

    You can connect the Time Capsule using an Ethernet cable to any router that you want. The key is to configure the Time Capsule in Bridge Mode.
    Here is an example from a recent post a few minutes ago using a 2-Wire router:
                     Re: TC + AT&T U-Verse            

  • Can I use time capsule with a USB cellular modem?

    Can I use time capsule with a USB cellular modem?

    No, since the USB port on the Time Capsule will only support a compatible printer and/or hard drive.

  • Hi can I use Time Capsule 4th generation as a back up at the same time between my iMac and HP PC

    HI Just bought a 4th generation Time Capsule and after a bit of trouble, I was able to do the following...
    1. Connect TC to my modem via ethernet cable
    2. Set up my first time Machine from my iMac to Time Capsule
    3. Set up my HP PC via ethernet cable to Time Capsule
    4. Set up HP Printer Scanner to USB port in Time Capsule, can now print from my PC and iMac using the same printer.
    Here is the question...
    Can I use Time Capsule (2TB version, not that this should matter, I think) as an external back up for my HP PC, running Windows 7?
    I asked this question at Apple Store and they said YES, now I have my doubts as I cannot see Time Capsule as an external drive when I check my PC and computer part there, can see my C drive, D drive (internal backup drive in my PC), E drive (DVD drive) and that is it.
    Installed AirPort utility for Windows, have version 5.5 something. I can see TIme Capsule using this at my PC but can I somehow save my HardDrive to Time Capsule, even manually?
    Or is the problem that as I started Time Capsule with Time Machine Backup first, it has formatted Time Capsule to support only Apple version, and this is why I cannot see Time Capsule as an external harddrive?
    Any help would be appreciated!
    I have already an external HD for my Windows PC, just thought this way I could potentially have all the data in one place and also able to use 1 printer...
    Many Thanks

    Remember Apple Names are not fully SMB compatible..
    Reset the TC and do the setup with all SMB naming.. ie.. short, no spaces, pure alphanumeric.
    That means TC name eg TC
    Wireless name (different for 5ghz) eg TC24ghz and TC5ghz
    And hard disk share name.. eg Data
    Make sure all passwords also match that convention.. but you can use more characters.. up to 20 or more if you are paranoid. Pure alphanumeric though.
    In the file sharing area. set the right workgroup. And it makes life easier turning on the guest account to read and write.
    Then in windows explorer simply type
    \\TCname or \\TCIPaddress .. obviously you change the names with the actual name or IP.

  • Can I use Time Capsule for Time Machine and a place to put my iPhoto Library

    Can I use Time Capsule for Time Machine and a place to put my iPhoto Library?

    Only if you partition the Time Capsure into two partitions, one for TM and one for the iPhoto LIbrary.  But you won't be able to backup that library as it will be on the same drive as the TM backups.
    It's not recommended.  An alternative solution is to get another EHD, move the library to it and run it from there. Then TM can backup both your boot drive and the working EHD drive.
    OT

  • Can i use time capsule as external hard drive for both mac and windows

    I have a mac book pro, ipad and iphone and ipod and a windows pc
    Can i use time capsule as a external hard disk only for all of the above ( including windows ) without the back up activity for mac ?

    You cannot access the TC from iOS devices without a browser. eg filebrowser.
    Can i use time capsule as a external hard disk only for all of the above ( including windows ) without the back up activity for mac ?
    Yes, with the following proviso.. the TC is not able to back itself up.. so if you store files on the TC without backups one day you will discover all your files are gone because of a hard drive failure of the TC. TM also cannot backup TC.. so you will need to buy a proper backup software.
    It is also much slower than a real NAS..
    And windows can be a bit painful.. especially windows 8.. other versions should work if you spend the time getting everything set right.

  • Can u use time capsule as a normal hard drive and don't activate the time capsule in my macs?

    can u use time capsule as a normal hard drive and don't activate the time capsule in my macs?

    Yes, but it will be slow and expensive compared to just buying an external and plugging it in locally.

  • How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

  • Can you use time capsule for your mac and have readynas backup your pc's on the same network

    Can you use time capsule for your mac and use readynas to back up your pc's on the same network

    Sure, that is trivial setup.. they both have different names and IP addresses.
    You should be able to use ReadyNas for TM backup but you should check the latest state of play for that.

Maybe you are looking for