Can I use toast 10 to convert AVCHD to DVCPRO HD with timecode ???

I have a project shot in DVCPRO HDp60 and they've now given me some AVCHD footage to work with. Following the advice around here I went out and got Toast 10 to convert the AVCHD to DVCPRO and it works but I don't get the timecode. I need to preserve the timecode because windows dubs have already been made and it'll be a reference. I have the full AVC file structure and do get proper reel# and timecode when using FCP Log&Transfer but don't want to use ProRes or AIC.
Can Toast transfer the timecode or did I rush out and buy this too soon??? And if so am I stuck with ProRes or AIC if I need timecode? And if so does the quality of AIC compare to DVCPROHDp60?
thanks for any help

Time Machine would work, but it is the wrong tool for this job...
Easiest is to buy a new drive which is the same form-factor (2.5-inch laptop SATA drive probably) which is in an external case. I'd go for a terabyte drive -- it's not much more expensive.
The tool you need now is a disk-copying utility -- the best ones are CarbonCopyCloner and SuperDuper. One is free, the other shareware.
Then you plug the new big drive into your MBP, and it will probably mount on your desktop. Use the cloning software to copy your internal disk to the new external disk. This will take an hour or two, as opposed to Time Machine which takes FOREVER!
When you are done making the copy, you need to swap the two disks between the computer and the external drive case. If you are adventurous, search YouTube for instructions on how to replace the disk drive on your computer. Or take it to your local mac repair shop and have it done by a professional.
Ok, now you have a big new disk inside the computer, with everything exactly as it was on the 250GB disk -- except for a lot more free space! And you have a "boot disk" in your little case, which you can put up on a shelf for safe keeping. After awhile, you can erase your old disk and use it for off-computer storage. Or just leave it and periodically boot from it and keep the software up-to-date. When all **** breaks loose (software upgrade that has gone bad, etc.) you will find it an invaluable tool!

Similar Messages

When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

What kind of CD are you burning (Audio or MP3)?
If you're burning an MP3 CD, the songs must already
be in mp3 format.
If not, iTunes will tell you that you have no songs
in the playlist.
M
I was making an audio cd. But I have since found out what the problem was. The files in my PLAYLIST I converted to aiff, since they were SDll files (I thought they were similar to AIFF, and they PLAY on Itunes...just won't burn.) When I selected the songs in the playlist and converted them...I thought all those files were converted, They were not. The converted files went into my LIBRARY, even tho I selected the ones in the playlist...and once I exchanged the SDll versions of the songs in my playlist. THEN they burned fine...but still...it's confusing..you say convert..it says it's been converted..and what they don't say is it's not been converted inside the playlist...where I had selected the songs...It just ADDED aiff versions..but only in the library...Anyway, that's what happened. But it's strange that it PLAYS SDll but won't burn them....and you'd think, logically..the ones you selected would change...but they don't. Playlists are mainly pointers to the actual files I guess...a sort of Alias..
At least it works now. But it's sad that the latest itunes does more, but also does LESS...as I used to be able to burn SDll files. Now I'll have to convert all my files to AIFF, and mp3's as I assume my ipod video won't play anything but mp3's?

Can I use Mac Dictate to convert voice memos to text?

Can I use Mac Dictate to convert voice memos to text?

If by "Mac Dictate", you mean the built in speech-to-text feature, no, you can't use that to convert a voice memo, at least not easily. Speech-to-text is designed to work on live speech, not recordings. But, there's no harm in trying.

I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

Your TV hasn't entered some odd picture in picture mode has it with two 'inputs' side by side?
AC

How can I use pdf pack to convert cubase documents (music scores) into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?

How can I use pdf pack to convert cubase documents (music scores) into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?

Hi mariab,
What format are those music scores (I'm not familiar with cubase documents). But, it may be that Adobe PDF Pack doesn't support that format. In that case, Acrobat is the way to go. You can then print your files to PDF as you'd like. You're welcome to try Acrobat for free for 30 days to see whether it's going to work for you. If you decide it is, and you'd like to use it going forward, you could convert your PDF Pack subscription into an Acrobat subscription.
Best,
Sara

How can i use Nikon D 7100 and Panasonic Lumix DMC-LF1 with Photoshop CS 5 Camera Raw?

How can i use Nikon D 7100 and Panasonic Lumix DMC-LF1 with Photoshop CS 5 Camera Raw?

The one needs 7.4 (or better), the other 8.1, so Photoshop CS5 with ACR6 is not up to the task.
The free DNG Converter could be used to convert the RAW images to DNG which your version of ACR should be able to process.

How can I use a 3rd party XML parser such as xerces with OC4J ?

Hi all tech experts,
I am using Oracle Application Server 10g Release 2 (10.1.2) and i have
installed Portal and Wireless and OracleAS Infrastructure on the same
computer.
i tried all the solutions on this thread
Use of Xerces Parser in out application with Oracle App Server 9.0.4
but still fighting.
I have also posted this query on OTN on following thread
How can I use a 3rd party XML parser such as xerces with OC4J?
but no reply....
Please help me on this issue.
Since OC4J is preconfigured to use the Oracle XML parser which is xmlparserv2.jar.
i have read the following article which states that
OC4J is preconfigured to use the Oracle XML parser. The Oracle XML parser is fully JAXP 1.1 compatible and will serve the needs of applications which require JAXP functionality. This approach does not require the download, installation, and configuration of additional XML parsers.
The Oracle XML parser (xmlparserv2.jar) is configured to load as a system level library of OC4J through it's inclusion as an entry in the Class-Path entry of the oc4j.jar Manifest.mf file. This results in the Oracle XML parser being used for all common deployment and packaging situations. You are not permitted to modify the Manifest.mf file of oc4j.jar.
It must be noted that configuring OC4J to run with any additional XML parser or JDBC library is not a supported configuration. We do know customers who have managed to successfully replace the system level XML parser and the Oracle JDBC drivers that ship with the product, but we do not support this type of configuration due to the possibility of unexpected system behavior and system errors that might occur from replacing the tested and certified libraries.
If you absolutely must use an additional XML parser such as xerces, then you have to start OC4J such that the xerces.jar file is loaded at a level above the OC4J system classpath. This can be accomplished using the -Xbootclasspath flag of the JRE.
i have also run the following command
java -Xbootclasspath/a:d:\xerces\xerces.jar -jar oc4j.jar
but no success.
How could i utilize my jar's like xerces.jar and xalan.jar for parsing instead of OC4J in-built parser ?
All reply will be highly appreciated.
Thnx in advance to all.
Neeraj Sidhaye
try_catch_finally @ Y !

Hi Neeraj Sidhaye,
I am trying to deploy a sample xform application to the Oracle Application Server (10.1.3). However, I encountered the class loader issue that is similar to your stuation. I tried all the three solutions but the application is still use the Oracle xml paser class. I am wondering if you have any insight about this?
Thanks for your help.
Xingsheng Qian
iPass Inc.
Here is the error message I got.
Message:
java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Stack Trace:
org.chiba.xml.xforms.exception.XFormsException: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.initModels(Unknown Source)
     at org.chiba.xml.xforms.Container.init(Unknown Source)
     at org.chiba.xml.xforms.ChibaBean.init(Unknown Source)
     at org.chiba.adapter.servlet.ServletAdapter.init(ServletAdapter.java:153)
     at org.chiba.adapter.servlet.ChibaServlet.doGet(ChibaServlet.java:303)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Instance.iterateModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.initializeModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.init(Unknown Source)
     at org.chiba.xml.xforms.Initializer.initializeBindElements(Unknown Source)
     at org.chiba.xml.xforms.Model.modelConstruct(Unknown Source)
     at org.chiba.xml.xforms.Model.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.dispatchEvent(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.dispatchEvent(Unknown Source)
     ... 18 more

Can I use more than one bluetooth device at a time with my iphone4

Can I use more than one bluetooth device at a time with my iphone4

Anthony
I have a Plantronics 975 earpiece that works very well with my Razr. I
just got a Panasonic KX-TG7873S phone system for my home, it has a
"Link-to-Cell" cellular convergence solution, from what I understand it is
just Bluetooth enabled. I have paired both device with my Razr. In
settings, Bluetooth setting, both device show. But only one device can
connect at a time. If my Plantronics is connected and I choose the
Panasonic device, the Plantronics device disconnects and the Panasonic
device then says it is connected. Both devices work when they
are connected. Is it because they are both "headsets"?
So, to have to remember to connect to one or the other device, depending on
weather I am coming or going is not practical.
On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

Can I use the remote app on my iphone to link with the ipad2 ?

Can I use the remote app on my iphone to link with the ipad2 ?

This is to control the music library to be more specific.

Can I use Logic Pro 9.1.6 on two computers with one licens

I have download and install Logic Pro 9.1.6 on my MacBookPro 13". I record on location with my MacBook an wil edit and arrange the music on my iMac at home. Can I use Logic Pro 9.1.6 on two computers with one licens. I'm the owner of both computers. If it can where can I find the program on my MacBook? and how to install and register?

Hi, is the iMac also 10.6.8? I had an iMac die when 10.6.8 was installed, it worked at first but after some You Tube flash videos the screen just locked and no mouse clicking anywhere did anything. It turned out that most older iMacs [ mine was from august 2007] have a graghics chipset that can't handle Snow Leopard, there were [are?] 77 pages on this "locked screen"topic in the Snow Leopard forum. I checked out a web site that tells you how much your mac is worth by filling in the sereal number-mine was worth only $168, I may give it to a friend for his children to play with, although that seems unholy. I doubt anyone woud buy it,the problem is now so well known that even Apple certified resellars here in the Netherlands refuse to repair them,they claim Apple will revoke their certification if they replace the faulty Graphics unit,it is also VERY hard to get to that unit in an iMac, everything is so tightly packed inside.
If your iMac is running Mountain Lion[10.8.0] you may have to change the app store preference to accept apps from all sites,normally ML will only allow app store apps to be downloaded.

How can I use a firewire hard drive on a new Macbook with one USB-C only?

How can I use a firewire hard drive on a new MacBook with only one USB-C?

kaz-k is correct about FireWire not being supported by any possible connector or adaptor to USB-C and never will. However, there is no such thing as a FireWire Hard Drive. There are only SATA (or if it is a really old one, ATA,) drives in a FireWire enclosure. If you can remove the drive from the case/enclosure - bust it open somehow if it is a glued-up unit - then the drive can be placed into a regular USB3 enclosure. Then it can connect to the new MacBook via any one of the adaptors Apple sells.

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?
This is only 8.3% of the available disk drive space!
http://digital.ni.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument
National Instrument's solution is either reformat you drive to less than 126GB or replace the drive with one less than that size.
Please NI, tell me you are going to fix your LabVIEW Real Time soon, and that we won't have to wait for LabVIEW RT 9.2.1 in 2011 for this one to be fixed.
http://upload.wikimedia.org/wikipedia/commons/9/90/Hard_drive_capacity_over_time.svg
Drives as large as 126GB or more have been around since about mid 2002. That's about 7 Years now and LabVIEW Real Time STILL can't use drives larger that 126GB! Please NI. Do something.
We deserve fixes to the old versions of LabVIEW RT. How about updates to LabVIEW RT. Such as 7.0.2, 7.1.2, 7.6.2, 8.0.2, 8.2.2, 8.6.2.
We don't need new features or versions of LabVIEW RT such as 9.0 until we have some of bugs fixed in the existing versions.
Kevin.
Message Edited by kmcdevitt on 05-29-2009 03:39 PM
Solved!
Go to Solution.

Coq rouge wrote:
NI is not making the Real Time OS in house. I do not remember which firm that is making it. Anyway you are allowed to use a hard drive that has been partitioned. And 126GB is some space is it not? I remember Bill Gates declared one time that 640Kb ram should be more than enough for any PC application also in the future
Coq Rouge (formerly t06afre),
The RealTime OS is an NI Product that is purchased from NI.
NI may or may not outsource design, developement, or manufacturing of the products that it sells under its own Company name.
For this reason I would be concerned if I were a PXI Embedded Controller designer/developer in the United States.
Yes, 126GB is some space. I see that there are now 2TB drives available. 126GB would be 6.3% of a new 2TB drive. Should we all be happy with being able to use 6.3% of the available drive space. Moore's Law seams to be alive and well. Drives larger than 126GB have been readily available for 5 or 6 Years. This should not be a surprise to NI. Why don't they do something about it.
Thanks for the trivia on Bill Gates. I must have missed that one since I don't try to keep up with Microsoft. I believe that he is a wonderful person and he and his family are doing wonders for the world in their "retirement". The world needs more like him.
What I do remember is Steve Jobs telling us that we would never need more that 128MB and that we would never to need to do anymore software development because everything was already in the "ToolBox".
McKevin.

How can I use JTA in my business logic and execute process with PAPI?

HI All,
How can I use JTA in my business logic and execute process with PAPI?
When my business logic has exception, the process will rollback.
or the process has some exceptions, my business logic also will rollback.
I don't know how to do it.
Does anyone know how to do it?

Thank you for your reply, Daniel.
But I think I did not express my mind clearly.
There is a scene that I have 2 Application Server.
My business code is deployed in one Server.
The BPM is deployed in another Server.
I want to execute Task use PAPI.(ProcessServiceSession.runActivity)
In my business code, I will do something before execute Task.
I need my business logic and Task in same transaction.
To ensure them "all-or-nothing" .
As you say, if The transactions are managed by Oracle BPM.
then can I retrieve OBPM transcaction in my business code?

Logic Pro 9 (9.0.0). Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0. I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

Since upgrading to lion, I can't use Logic pro, hope someone can help. thank you
Logic Pro 9 (9.0.0).
Message
You can't use this version of the application Logic Pro 9 with this version of Mac OS X
You have Logic Pro 9 9.0.0.
I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Since upgrading to lion, I can't use Logic pro, hope someone can help. thank you
Logic Pro 9 (9.0.0).
Message
You can't use this version of the application Logic Pro 9 with this version of Mac OS X
You have Logic Pro 9 9.0.0.
I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Can i use HP external DVD writer on Mac Book pro with retina display?

can i use HP external DVD writer on Mac Book pro with retina display? and can i use seagate external hard disk on mac book pro with retina display?

You should have no problem using the external optical drive. As for the external HD, you'll need to format it properly, depending on whether you want to use it with a Windows machine as well as your MacBook Pro.
Clinton
MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Can I use toast 10 to convert AVCHD to DVCPRO HD *with timecode* ???

Similar Messages

Maybe you are looking for

Can I use toast 10 to convert AVCHD to DVCPRO HD with timecode ???