Can I use two audio devices simultaneously ?

I have Mackie Onyx 1620 with firewire card and I have also MOTU 828. Both devices are linked together. When using Logic Express 8 there is list on preferences/audio/devices and on that list there are both Mackie and Motu. But I can choose only one device ? There are sometimes situations that I need more input channels than Mackie has ... How can I add MOTU channels on inputting?

You need to use the Audio MIDI Setup utility (Applications/Utilities) to setup an aggregate device. Check out this page for an explanation of how to do so:
http://www.apple.com/pro/techniques/aggregateaudio/

Similar Messages

Can i use two bluetooth devices simultaneously with iphone 4s? Specifically,a bluetooth headset, as well as a new low energy bluetooth heart monitor?

Can I use two bluetooth devices simultaneously with iphone 4s? Specifically a bluetooth headset as well as a new low-energy smart bluetooth heart monitor?

I don't believe so.

Can I use two audio devices on a macbook pro? I.e Headphones and the built in speakers

So I have Mumble (voip) running, and Spotify at the same time. I use apple headphones to talk to people on mumble but i want to use my speakers to listen to music on spotify. Is there a simple way i can set this up?

Radio Shack sells a splitter that plugs into the single jack then provides two jacks for two headsets at the same time. Provided you got a set of speakers with the appropriate matching impedance you could connect them to one of the two output jacks on the splitter.

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Using two audio interfaces simultaneously?

Hi
Not sure if this is an unsual query - will Logic recognise two usb audio interfaces of the same make running simultaneously?
Would they come up as interface (1) and (2)? - I know Pro tools does this if you rack up multiple interfaces - however these would not be 'linked' as such..just put into the two usb ports of a mac book.
Basically I have a single stereo out alesis io2 interface, but need to run two tracks independantly of each other into a desk - so wondered if getting another io2 would be a cheap work around...
Thanks for any help.
Matt

Yes, you can set up an "Aggregate Device" in Audio Midi setup, which Logic will then recognize. This support page tells you how:
http://support.apple.com/kb/HT1215

Can you use different audio devices for different apps?

I've paired my iMac with a set of Bose Companion 20's - they connect via the headphone socket. I regard these as my default audio device. However, when I work from home I need to use Lync 2011 for Mac and want to be able to use a bluetooth headset for lync enterprise voice calls (my employers chosen platform). Is it possible to use my bluetooth headset for incoming / outgoing calls when using Lync but the Bose speakers for say internet radio? If this is possible, any guidance as how to configure would be much appreciated. Thanks in advance....

After going to a particular folder and selecting a view, click the little Action Gear and select "Show View Options" and at the top check the box "Always open in xxx view" where xxx will be the view you presently have selected.
Do not check the bottom box to use this as a default or else all folders will then open this way.
Message was edited by: nerowolfe

Can you use two bluetooth devices on iPad at the same time?

Want to use the wireless keyboard along with the Jambox wireless speaker. Will the iPad allow you to connect to two Bluetooth devices at once? Thanks!

Seven is the Bluetooth max, but you should probably not do more than three or four and then depending on the BT protocols that each device is using.
I use my Apple BT keyboard and my Cellular Innovations BT headphone clip at the same time without any issue whatsoever.

HT5622 Can I use two Apple ID account in one device. Are there irregularities

Can I use two Apple ID account in one device. Are there irregularities

You can use one ID for iTunes/iTunes Match, and another for iCloud, without any problems. You can add a secondary iCloud account in System Preferences (or Settings)>Mail, contacts and Calendars. Its data will appear alongside the main iCloud account though you cannot use PhotoStream with it.

Can I use two airports to use internet and listen to itunes in stereo? simultaneously?

Can I use two airports to use internet and listen to itunes in stereo? I just bought a second airport so I could listen to itunes & Pandora on my stereo. My problem is that I haven't been able to connect to both airports at once. I want to listen to the stereo (one airport) while using internet which is connected to a separate airport. Unfortunately, the stereo and ethernet cables are not close by which is why I bought the second airport.

You can run both simultaneously. You just need to reconfigure the base station that will be used for streaming as a wireless client.
I suggest that you start by performing a "factory default" reset on the 802.11n AirPort Express Base Station (AXn) to get it back to its "out-of-the-box" configuration. By default, the AXn will broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN
After the reset has completed, plug the AXn into power, and then, verify from the iMac that this network shows up in the list of networks under the AirPort icon in the OS X menu bar.
Be sure to first switch the wireless network to the AirPort that will be used for streaming. Note: You will temporarily lose the Internet connection from your "main" AirPort. Then, run the AirPort Utility. The Utility should now find the streaming AXn. If not, use the Utility's "Configure Other" option under the File menu option in the Utility's menu bar. Enter 10.0.1.1 for the Address and "public" for the Password.
AirPort Utility > Select the AXn > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing "main" AirPort's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AXn > Manual Setup >Music
Enable AirPlay (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

Can I convert the optical output to analog for a zone 2 audio? I would continue using the HDMI for the main zone. Can I use both of these simultaneously? Zone 2 only supports analog on this receiver.

Can I convert the optical output to analog via a converter for zone 2 audio? I would continue using the HDMI for the main zone. Can I use both of these simultaneously? Zone 2 only supports analog on this receiver.

These will probably help.
[http://www.jsresources.org/examples/audio_conversion.html]

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can I use two accounts ?

How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

Hi Bob,
Thanks for the advice. It succeeded.
The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
Finally...
Sytze

Can I use two accounts in Game Center?

Can I use two different accounts for playing a game on same device?

If you are running iOS 7, read this.
https://support.backflipstudios.com/entries/22685780-iOS-7-and-You-A-How-to-Guid e-on-Updating-PLEASE-READ-
it is a good idea to post as much information as you can when you ask a question, many times, the iOS is relevant to what the answer will be.

Can I connect two firewire devices?

Ideally, I need two firewire devices running at the same time: One camera to capture footage and one firewire external hard disk for the media files (about 160 GB).
a) I've been told that I need a firewire external disc, because a USB hard disk would slow down the editing in Final Cut. Is this true?
b) If so, can I connect two firewire devices to my MBP (74.53 GB internal hard disk), which has only one 400 Firewire port?

1. Yes, FireWire is faster than USB. However, it would be better to edit on your main hard drive. Use the external drive just for storage and backup.
2. You can chain up to 255 FireWire devices provided the total power requirements did not exceed the port's capabilities. A single FireWire drive and a camera shouldn't be a problem. However, you should know that some FireWire cameras may not play well with other FireWire devices. If you find apparent problems when both are connected to the port, then you may need to use each separately. In this case you may need to put the hard drive on a USB port while the camera is connected to the FireWire port unless the camera also supports transfers on USB 2.0.

Can I use two audio devices simultaneously ?

Similar Messages

Maybe you are looking for