Can I use two different greens for green screening and keep one without it being keyed out?

I am using a green screen which is your standard light green fabric.
I am also wearing a bottle green cape.
I want to key out the standard green which is no problem. However it also takes out the bottle green on my cape.
Is there a way on either Premiere Pro or After Effects to ensure the bottle green stays as it is without being automatically keyed out?
Many thanks.

shooternz wrote:
rotoscope
There's your answer, most likely.  I can think of a few methods you might try, but they're going to be labor intensive, and likely involve some roto.
Most keyers have a threshold setting that determines what colors stay and which ones go.  You could keep tweaking that setting in very small increments, and if you get lucky, it might discriminate between two green values.
You might be able to precomp in Ae and use the Change Color plug to shift one of them to a more contrasty green or different hue altogether and create a luma matte.
But, you failed green screen 101, and you gotta' go to detention.
robodog, you're being a bit harsh on Jimmy Simon.  He said "Might be worth a reshoot...."  I can't disagree.  Depending on arahman's situation, a reshoot might be easier and quicker.  You never know.

Similar Messages

  • How can I use a different driver for audio input and output?

    I did a search of course, and came up with something about an aggregate. I have no idea what this is, how to do it, or if it would even work for me.
    What I am trying to do is:
    1) Record into Logic Express using my Tascam US-122.
    2) Have playback come out of my computer sound system, not the Tascam.
    If I go over to the Audio setup window, I can only record when the driver is set to Tascam US-122. Likewise, I can only listen to sound when my Built-In Audio is selected. It gets rather annoying going between the two.
    So, would this aggregate thing solve my problem? If so, how do I do it? Thanks for any help!
    -allen

    Yes it should do what you want.
    Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
    Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

  • Can i use two iphone user for a single apple ID to download apps from iTunes?

    can i use two different iphone for a single apple ID to download apps from iTunes?

    You can use as many iPhones as you want, there is no limit to the number of devices that can sync to an iTunes account.

  • Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    The link is to a discussion started on 12/18 in the FiOS Internet forum.  Here's the link I get now, however it is different than the link I pulled a few hours ago.  If this system changes the link again, it may not work.
    http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
    You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
    Here's a link that is in the thread that gives more detail.
    https://secure.dslreports.com/faq/15984
    Good Luck!
    P.S.  "Copper Contributor" is my "rank."  gs0b is my user name.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • SLI - Can I use two different video card versions for SLI?

    Hello,
    Can I use two different generations of MSI video cards that implement the same GPU for SLI?   
    The two video cards are:
    MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
    MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
    MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
    The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2.  The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on.  I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore.  The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
    By the way, why are there so many versions (updates?) to this card?  Have there been issues related to the card that necessitate a revision?
    Thanks

    Different coolers(HS and fans) and possibly different makers of vRAM.  But, you should be able to run SLI without issues regardless of the versions.

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • Can we use two costing variant for standard cost estimate

    Hi,
    Can we use two costing variant for standard cost estimate of two different materials in the same period ? e.g. Costing variant Z001 for Material code 1000 and Costing Variant Z002 for Material code 2000.
    Here the system is not allowing to change the costing variant in Marking Allowance (t code CK24) for marking and release of Material cost 2000 if the standard cost for Material code 1000 is already marked and released.
    Thanks,
    Bijay

    For a material in a period only one price can be released. Though you cn have two separate costing variants and then calculate standard estimate with that. U can release based on one variant only for a month. Or use MR21 and update the price as per the other variant
    Thanks and Regards

  • HT204053 If I have set up my Mac with two different users,  can I use two different Apple IDs on the same Mac?

    If I have set up my Mac with two different users,  can I use two different Apple IDs on the same Mac?

    Each user account may have its own Apple ID.

  • Can I use two different itune accounts on one computer?

    Can I use two different itune accounts on one computer?

    1. Give her a separate user account on your computer. If you have a backup copy of the library, you can restore it.
    2. If you encounter a 90-day waiting period, click here and ask the iTunes Store staff if they'll remove it.
    (125941)

  • How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?

    hello,
    How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
    thanks,
    Jay

    Hi,
    I understand that it applied first logo to all other sub sites.
    Please make sure that you change the logos in the subsites.
    If we change the logo in the root site, the logos in the subsites will be changed at the same time.
    However, we can change the logo in the subsites separately.
    We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
    Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How can I use two differant iphones on one itunes

    I can i use two differant iphones on one itunes, and keep the content seperate?

    You can sync as many iphones/ipod/ipads as you like to one computer.
    Each is different and is recognized as such

  • Can Motion 5 replace a green screen and blue screen in the same shot?

    Can Motion 5 replace a green screen and blue screen in the same shot? I would like to replace a green screen with one image, and a blue screen with another.

    Fox gives a good example for keying green & blue (or any other color)  from the same shot. I'd suggest doing a few things to get better accuracy.
    First, the motion keyer always removes the color it detects the most of by default (blue/green). You can override this by setting the Strength parameter to zero, then use the Color sample tool to select the color you want. The advantage is motion will do a good job of targeting only the hue (color) that you want to remove and set an appropriate starting softness.  It also will remove spill based on this color.  Looking at Fox's example movie and the shot, I'd approach the same shot this way:
    Remove the Blue
    1. Apply the keyer and set the strength to zero.
    2. Use the Sample Color tool and select the blue (or other color) to be removed.
    3. Decrease the spill level (if needed). In Fox's example the spill from the blue glasses is going to be minimal, especially compared to the green screen, your shot may need different adjustments. Only de-spilling what you need to will give you more accurate color right away and minimize additional color correction that might be needed later.
    4. Use the Color selection tools (Chroma wheel/Luma bar) to fine tune.  Ideally you want a minimal tolerance, the inner selection, with a nice fall off, the outer selection. Try with the Scrub boxes setting first, then switch to manual if you need more control. Again see Fox's example.
    Remove Green
    It's the same as the blue, you could apply the keyed to the same clip or a parent group, at this point it's many user preference.
    With these techniques you can remove any color from a shot or create a mask based on a color. BTW, as you are learning to use the keyer I'd highly recommend  having the Color Selection open so you can see the graphs.  These give you real time feedback as you make selections and changes with the Strength, Refine and Color selection tools.  Watch what happens as you make selection or changes, sometimes the problem area is actually in the brightness not the color, or the softness may change  more than the tolerance selection.  Observing what is happening in these graphs will help you figure out wha to change and speed things up.

  • How to use the different class for each screen as well as function.

    Hi Experts,
    How to use the different class for each screen as well as function.
    With BestRegards,
    M.Thippa Reddy.

    Hi ThippaReddy,
    see this sample code
    Public Class ClsMenInBlack
    #Region "Declarations"
        'Class objects
        'UI and Di objects
        Dim objForm As SAPbouiCOM.Form
        'Variables
        Dim strQuery As String
    #End Region
    #Region "Methods"
        Private Function GeRate() As Double
                Return Double
        End Function
    #End Region
    Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
            If pVal.BeforeAction = True Then
                If pVal.MenuUID = "ENV_Menu_MIB" Then
                End If
            Else ' Before Action False
                End If
        End Sub
    #End Region
    End Class
    End Class
    Rgds
    Micheal
    Vasu Anna Regional Feeling a???? Just Kidding
    Edited by: micheal willis on Jul 27, 2009 5:49 PM
    Edited by: micheal willis on Jul 27, 2009 5:50 PM

  • Can I use the same itunes for my ipad and iphone?  Will the computer erase my other device information?

    Can I use the same itunes for my ipad and iphone on my computer?  Will the computer erase my other device information?

    The computer will not erase the information.  Each device will show up in iTunes as a separate device and you can control the information for each device through iTunes.

  • Can i use other credit card for my id and purchase

    Can i use other credit card for my id and purchase

    Your original question did not mention seeing billing info.
    Here's how to contact iTunes Store Billing Support:
    iTunes Store: Contacting billing support

Maybe you are looking for