Can i  use Two DSO 's in Function module

hi experts,
Can i  use Two DSO 's in Function module  .That FM is used for Layout
I actually  want to  fill one DSO Refering the Data in Another DSO.
Regard
Naresh.

In the first way the DSO's are usually called shared libraries or DSO libraries and named libfoo.so or libfoo.so.1.2. They reside in a system directory (usually /usr/lib) and the link to the executable program is established at build-time by specifying -lfoo to the linker command. In the second way the DSO's are usually called shared objects or DSO files and can be named with an arbitrary extension

Similar Messages

  • Can we use two separate apple ids on one laptop to upgrade apps

    can we use two separate apple ids on one laptop to upgrade apps

    Welcome to the Apple Community.
    Only if you use two separate user accounts.

  • Can I use two or more seperate Apple ID accounts on Apple TV? Everyone in my family has a different account.

    Can I use two or more Apple ID accounts on the new Apple TV? Everyone in my family has a seperate account.

    Of my 7 Apple TV's only one is connected by ethernet, they all work as expected, more often than not at the same time (I probaly haven't had 7 running at the same time, it depends on who's using what))

  • Can i use two apple tvs with one itunes account?

    can i use two apple tvs with one itunes account?

    yes and you can use more then 2
    just don't give them the same name

  • HT204053 If I have set up my Mac with two different users,  can I use two different Apple IDs on the same Mac?

    If I have set up my Mac with two different users,  can I use two different Apple IDs on the same Mac?

    Each user account may have its own Apple ID.

  • Can i use two icloud accounts on the same computer?

    can i use two icloud accounts on the same computer?

    You can have content from two iTunes Store accounts in one library, and multiple libraries on a computer.
    (98306)

  • Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    The link is to a discussion started on 12/18 in the FiOS Internet forum.  Here's the link I get now, however it is different than the link I pulled a few hours ago.  If this system changes the link again, it may not work.
    http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
    You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
    Here's a link that is in the thread that gives more detail.
    https://secure.dslreports.com/faq/15984
    Good Luck!
    P.S.  "Copper Contributor" is my "rank."  gs0b is my user name.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Can I use two different itune accounts on one computer?

    Can I use two different itune accounts on one computer?

    1. Give her a separate user account on your computer. If you have a backup copy of the library, you can restore it.
    2. If you encounter a 90-day waiting period, click here and ask the iTunes Store staff if they'll remove it.
    (125941)

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • How can I use two differant iphones on one itunes

    I can i use two differant iphones on one itunes, and keep the content seperate?

    You can sync as many iphones/ipod/ipads as you like to one computer.
    Each is different and is recognized as such

  • How can I use two accounts ?

    How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

    Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

  • Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and  Time Capsule (for music and videos)

    Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and  Time Capsule (for music and videos)

    Not via Time Machine.   It cannot back up from a network location.
    The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
    EDIT:  And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port.  Second TC not required.
    Message was edited by: Pondini

  • HT5622 Can I use two Apple ID account in one device.  Are there irregularities

    Can I use two Apple ID account in one device. Are there irregularities

    You can use one ID for iTunes/iTunes Match, and another for iCloud, without any problems. You can add a secondary iCloud account in System Preferences (or Settings)>Mail, contacts and Calendars. Its data will appear alongside the main iCloud account though you cannot use PhotoStream with it.

  • SLI - Can I use two different video card versions for SLI?

    Hello,
    Can I use two different generations of MSI video cards that implement the same GPU for SLI?   
    The two video cards are:
    MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
    MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
    MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
    The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2.  The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on.  I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore.  The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
    By the way, why are there so many versions (updates?) to this card?  Have there been issues related to the card that necessitate a revision?
    Thanks

    Different coolers(HS and fans) and possibly different makers of vRAM.  But, you should be able to run SLI without issues regardless of the versions.

  • Can i use two model

    hi
    can i use two Adaptive RFC model in same webdynpro application.(JAVA)

    Hi Piyush
    Yes. You can. You could for example create a model with RFCs from SAP CRM and one model with RFCs from SAP BW. You shouldn't create two models that both point to the same backend system (e g SAP CRM). This will create two JCo Connections towards the same backend system which is an unecessary overhead.
    Regards
    Göran

Maybe you are looking for