Can I use two HP Pavillion 23bw monitors with my MBP with Retina Display?

Can I use two HP Pavillion 23bw monitors with my MBP with Retina Display with good video quality? I just purchased them and am already reading about issues with non-Apple External Monitors being used with MBP with Retina.  Plus I just assumed it given the power of the video card, but I can turn off the display to my MBP and extend the two HP monitors correct? I do realize they won't have the picture quality of the retina display but I would hope they look reasonable with 1080p
New to the Support Community so thanks in advance for any help.

This is an update on the question about the use of the Dell P2415Q 4K monitor with MacBook Pro 13" and 15" w/ Nvidia graphics card installed. The monitor works very well with both systems and is automatically identified when connected. The 13" machine with Iris Graphics defaults to 2560 x 1440 at 60hz. This was very workable, matching the Apple Thunderbolt Display for resolution. I was not able to set the display for full 4K at 3840 x 2160, even at 30hz. Just not enough horsepower with the basic Intel CPU with Iris Graphics. But make no mistake, the setup works well and the screen looks great.
The 15" with Iris Pro Graphics and the Nvidia GeForce GT 575M discrete graphics card also recognized the display and drove it at full 4K, 3840 x 2160, 60hz with no problems. Running in clamshell mode required a bit of fine tuning with the Apple display settings. But nothing major.
Due to a relatively small workstation, I selected the 24" version of the Dell monitor. If you are looking for a relatively large monitor with near "retina" resolution, the P2415Q is a perfect pairing for the MacBook Pro - and a terrific bargain. I paid $530 on the Dell website.

Similar Messages

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • Can I use Final Cut Studio 2 on the latest macbook pro retina display?

    I'm planning on buying the 15" macbook pro retina display and was given Final cut studio 2 from a friend as he woudn`t use it.
    is it possible to install this program on the computer at all and successfully use it or can i upgrade to the newest version?

    Studio 2? FCP 6? No. Sorry, won't even install. It's 8 year old software...and Apple no longer supports it. 
    The latest version, FCP-X...costs $299. There is no upgrade cost. But once you buy it, every single update after that is free...given the history of past updates.  Note...it's very different from FCP 6. Completely different app.

  • Can I use an imac as a monitor for 2012 MBP?

    I use a very slow mac at work, but once a year I need grunt to produce our annual catalogue.
    My work imac is 20-inch, Mid 2007 (Old I know but my boss is too tight to upgrade)
    My laptop at home is new 2012 MBP, 16gb Ram.
    My Question is:
    Can I connect my 2012 MBP to my work iMac for use as a monitor?
    If so, what cords do I need?
    Any help would be great.

    Well that was helpful.  So having trawled these discussions it appears that:
    A) the iMac I have doesn't have a video input capability, so it can't be a dumb monitor
    B) the iMac could connect to my air book over a network connection using JollyfastVNC software on the imac and screen recycler on the airbook.
    So I will try the recycler option over wireless and over a cabled connection and see how cumbersome it is to use.

  • Can I use two "finite pulse train" to work in parallell with different freq.?

    I want to generate two seperate pulsetrains in parallell with different freq. and number of pulses. I am using a "PCI 6036E" with two counters on the device. I think I need four counters to make this task? I would be very glad if anyone had any answer on this

    It will take four counters to generate two pulse trains with two different frequencies and number of pulses. As a workaround with your existing device, you can possible create a pulse train using one of the analog outputs, if it's available. Otherwise, you'll need either another MIO device or you could choose to use a TIO device (660x) which will have 4-8 counters.
    Hope this helps!
    gus....

  • How can I use two monitors to increase workspace?

    how can I use two monitors to increase workspace?

    Drag the tabs of any After Effects windows you want to the second monitor.

  • Can i use two bluetooth devices simultaneously with iphone 4s? Specifically,a bluetooth headset, as well as a new low energy bluetooth heart monitor?

    Can I use two bluetooth devices simultaneously with iphone 4s? Specifically a bluetooth headset as well as a new low-energy smart bluetooth heart monitor?

    I don't believe so.

  • Can you use your imac as a monitor for you mac book pro laptop?

    Can you use your imac as a monitor for you mac book pro laptop?
    I have two computer one being a new mac book pro and the other being a slightly older imac desktop. I am wanting to know if you can use the desktop as a screen for my mac book pro. I just to mirror the laptop onto the desktop because it is more powerful, instead of getting another display for my laptop.
    Is this possible and what connections do I need?
    Thanks

    Hello, we need more info on the iMac, not positive but I think it requires a 2010 or newer iMac & a Mini Display Port cable.
    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4

  • Can we use two separate apple ids on one laptop to upgrade apps

    can we use two separate apple ids on one laptop to upgrade apps

    Welcome to the Apple Community.
    Only if you use two separate user accounts.

  • Can I use two or more seperate Apple ID accounts on Apple TV? Everyone in my family has a different account.

    Can I use two or more Apple ID accounts on the new Apple TV? Everyone in my family has a seperate account.

    Of my 7 Apple TV's only one is connected by ethernet, they all work as expected, more often than not at the same time (I probaly haven't had 7 running at the same time, it depends on who's using what))

  • Can i use two apple tvs with one itunes account?

    can i use two apple tvs with one itunes account?

    yes and you can use more then 2
    just don't give them the same name

  • HT204053 If I have set up my Mac with two different users,  can I use two different Apple IDs on the same Mac?

    If I have set up my Mac with two different users,  can I use two different Apple IDs on the same Mac?

    Each user account may have its own Apple ID.

  • Can you use two iPod's on the same computer?

    I currently have an iPod Video, and my mother wants to get a shuffle or nano. The problem is, we only have one computer that will let iTunes run. Is it possible to use two iPods on the same computer, or even with the same iTunes?

    See these articles about using more than one iPod on one computer, and with either one or more iTunes libraries.
    Multiple iPod installations.
    How to use multiple iPods with one computer.
    If you have the latest iTunes, an easy way to create a new library is to hold down the 'alt' key whilst opening iTunes (for Macs), or hold down the 'shift' key (for Windows).
    This will give you the option of either using the current iTunes library or creating a new one.
    There are various methods of transferring different songs to different iPods with a single iTunes library.
    One is to manage the songs manually.
    With this setting, you can drag and drop songs/playlists etc onto the iPod from iTunes, and also delete and/or edit songs which are currently on the iPod without affecting the iTunes library.
    If you wish to keep the convenience of automatic sync, then you could set the iPods to sync with "selected playlists". This setting can be found in the iPod summary screen under the 'music' tab. With this setting, different playlists can be transferred and later deleted from each iPod without affecting any playlists stored in iTunes or the playlists on the other iPods.
    Also, on the 'summary' main page you will see the option to "only sync checked items". With this setting selected, if you remove the check marks from any songs in iTunes, they will not be transferred to the iPod. You can restore the check mark if you want to put the songs back on the iPod at a later date.
    Be aware that when playing songs in iTunes, any songs that do not have a check mark against them will be skipped over and will not be played.

  • Can i use two icloud accounts on the same computer?

    can i use two icloud accounts on the same computer?

    You can have content from two iTunes Store accounts in one library, and multiple libraries on a computer.
    (98306)

  • Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    The link is to a discussion started on 12/18 in the FiOS Internet forum.  Here's the link I get now, however it is different than the link I pulled a few hours ago.  If this system changes the link again, it may not work.
    http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
    You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
    Here's a link that is in the thread that gives more detail.
    https://secure.dslreports.com/faq/15984
    Good Luck!
    P.S.  "Copper Contributor" is my "rank."  gs0b is my user name.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Maybe you are looking for