Can I use UK software on a US Macbook Pro?

Since iDVD is gone, I figured I would just buy an old version of iLife on eBay. (I already tried out the alternatives in the App Store and they all suck.) I found a seller from the UK, but I want to make sure I'll be able to use the software on my US Macbook. Should there be any problems?
Thanks!

There aren't any problems specifically associated with doing that.
(93030)

Similar Messages

  • Can I use an USB disc with my macbook pro bought in 2005.  What capacity will it take 2.00 or 3.00?

    can I use an USB disc with my macbook pro bought in 2005.  What capacity will it take 2.00 or 3.00?

    The first MacBook Pro's were not released until the beginning of 2006, and they had USB 2 ports.
    Anything available new in 2005 would have been a PowerBook G4 and they also had USB 2 ports.
    A USB 3 disk will just transfer data slower then it could do, if you plug it into a USB 2 port though, so you can buy either.

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

  • Can I use Dell AOI 922 printer with MacBook Pro?

    Can I use Dell AOI 922 printer with MacBook Pro?

    Cisco:
    Very helpful!   My set up was Mac/ Lion trying to Print off a Dell Photo A10 922
    Lion does not store any Lexmark, nor dow Apple, but I went to the lexmark site, and found this-
    http://support.lexmark.com/index?productCode=LEXMARK_X5270&page=product&locale=E N&userlocale=EN_US#1
    Downloaded that, then hooked up the printer, Cmd-P, and the Mac found the drivers I had loaded.
    Works fine.  Now when I go to my sisters, I can print!
    byw, I'm probably just a Level 2  "GIYF"er, but your the only one ( of MANY folks) who thought to search Lexmart. I've seen posts by MANY geeks saying a Mac could not print to ANY Dell printer.
    Nice job,
    Rich

  • Can I use my iMac Install Disc on Macbook Pro?

    Hi, all.  I was given a friend's old Macbook Pro and I'd like to put Boot Camp on it, but the Boot Camp instructions say I need an OSX Leopard install disc to do it.  Naturally, I just recently purged my own software binder and threw away all of my OSX discs except the one that came with iMac I recently purchased.  "Why would I need them any more?" said I.  Doh.
    I have no idea what cat Apple is up to now, but the Macbook is running 10.5.8 and the install disc from my iMac is 10.6.7.  My questions:
    1) Can I use my iMac install disc on my Macbook Pro, which is about 3-4 years old?
    2) Does OS 10.6.7 qualify as Leopard?  If not, will it work for what I'm trying to do?
    3) Do I need to update the Macbook OS to 10.6.7 to be able to use that disc for the Boot Camp install?
    Any information or advice would be appreciated.  Thanks!

    The only thing I'd add to this is that at one point in time you could go to an Apple store and purchase Lion on a USB stick.
    If your MBP was compatible and you could find one of those you could boot to it, install from it then setup bootcamp.
    Also if you are thinking bootcamp, also consider VMWare Fusion or Parallels which allow you to run Windows while still in OS X.

  • How can I use an A1082 monitor with my MacBook Pro?

    I received an apple A1082 monitor this past weekend from a friend and we couldn't, and still can't, figure out how it can be used with my MacBook Pro. I know that I need an adapter, but where does it get power from? Thanks in-advance. Richie.

    <http://support.apple.com/kb/HT2803>
    <http://www.ebay.com/bhp/apple-cinema-display-90w-power-adapter>

  • Can I use an Easycap DC60 with my macbook pro?

    Hi, I have purchased an Easycap DC60 and downloaded Easycap viewer but it doesn't seem to recognise the device. Have I bought something which is not compatible or is there something out there that I can use? I wanted this to copy old VHSC tapes from a camcorder and edit on my macbook. Any help on this would be gratefully received.

    The first MacBook Pro's were not released until the beginning of 2006, and they had USB 2 ports.
    Anything available new in 2005 would have been a PowerBook G4 and they also had USB 2 ports.
    A USB 3 disk will just transfer data slower then it could do, if you plug it into a USB 2 port though, so you can buy either.

  • Can I use the HDMI Out on my macbook pro retina for audio without connecting a video device?

    While the MBP has TOSLINK output from the headphone jack, TOSLINK does not have the bandwidth to carry the high resolution audio from many blu-rays and DVD-Audio disks. I would like to hook my MBP to an audio-only HDMI sink so I can pipe the multichannel output to my surround speaker setup.
    My concern is that the MBP will get "confused" and do one of the following things - both of which are "bad":
    1) It will decide that a video device is there, and put the desktop on the nonexistent HDMI display OR
    2) It will decide to send no signal at all (no video, no audio) because it sees no video device.
    Any thoughts on this?
    In short - thinking of using something like this: http://www.ambery.com/2hddodtsdihd.html
    with the HDMI out of the MBP and then piping its 6 discrete analog outputs to my old (but excellent for computer speakers) Logitech Z680 setup.
    But I want any movie video to remain unperterbed on my Thunderbolt display. And if I am not watching a movie and am just listening to multichannel FLACs or something, then I'd like to run the media player normally and have the usual desktop on my MBP or Thunderbolt display.
    Any thoughts?
    Thanks to all!!
    -L

    nopenshaw3 wrote:
    I have searched through the forums relentlessly of both Mac and third party, but I seem to never find a good, well thought out answer for my specific question. Every answer is filled with snobby know-it-alls who either respond with sarcastic answers or post links to other threads that don't answer the question in an attempt to make the asker feel like an idiot.
    Not the best way to get started frankly but ...
    nopenshaw3 wrote:
    QUESTION 1: Is there anyway that I can buy a new logic board with upgraded graphics card and it will work?
    Not from Apple, you can go to the grey market if you choose but it is most likely that the only MB that will work is the one you already have.
    nopenshaw3 wrote:
    I have also read a little bit into using the Thunderbolt port as a means to run an additional graphics card through, the hardware for it being built by a company named Sonnet.
    QUESTION 2: Is this an option that will actually work with my Macbook Pro setup and give me better graphics card capabilities?
    Maybe, if the Sonnet is properly Thunderbolt compatible it should.
    nopenshaw3 wrote:
    So with that said, please, If you're going to respond, just do so in a manner that will actually help me out. I know it's a lot to ask, but please, PLEASE DON'T BE ONE OF THOSE PEOPLE!
    Yes, well ... you have a nice day now.

  • How can I use my Magic mouse in a Macbook pro?

    I have an iMac and I'm using the magic mouse. I just got a Macbook Pro and would like to use the mouse with this computer too.
    How can I make it work in both computers?
    I won't use them at the same time of course. I use one during the day, and the other at night so I'm hoping to make the mouse work in both.
    Thanks in advance!!

    THANK YOU SO MUCH!!!
    You have been very helpful! I will try that! Thanks!!
    PS: One last question, will it work if I put it in "sleep" mode or it has to be shut down?
    Thanks again!

  • Can i use older ram on a newer macbook pro

    I have a MACBOOK PRO 15' LATE 2011 2.2 GHz intel core i7 4gb 1333 MHz DDR3 can I use an 8gb 1066 MHz DDR3 on it???
    please need help??
    Thank you

    It may work, but the performance won't be the same and it's risky. If you have checked that everything except the RAM speed meets the requirements of your Mac, that memory should work, but your Mac will use 1066 MHz instead of 1333 MHz.
    I recommend you to buy new 1333 MHz memory to guarantee the compatibility and save headaches in the future if the 1066 MHz memory doesn't work

  • Can't use Install Disk to repair my MacBook Pro HD

    Hi,
    I ran the Mac Disk Utility on my MacBook Pro's HD and I got this screen:
    http://i99.photobucket.com/albums/l320/brunotapia/help.gif
    [IMG]http://i99.photobucket.com/albums/l320/brunotapia/help.gif[/IMG]
    So I inserted the install disk so that I could boot up from the CD and run disk utility to repair my HD.
    But the MacBook Pro keeps spitting out the disk. It reads other disks fine and this install disk reads on my friends computer so I know that both the MacBook Pro drive and the install disk are ok. So what could be causing my problem?
    I have also tried to boot the computer from the disc holding the "C" key down, but the computer spits out the disk and boots up from the HD.
    How can I repair the HD if I can't get the OS to boot from the install disk? What else can I do? Can I boot from another HD or Thumb drive? How about an iPod?
    Any information would be greatly appreciated.
    Bruno

    Are you using the OS X Installer Disc One that came with your computer? To startup from the installer disc first insert the disc in the optical drive (label side up.) If the computer does not allow the disc to mount on the Desktop then either your optical drive is bad or the installer disc is damaged or is not a valid installer disc for your model.
    If the disc mounts on the Desktop then restart the computer and after the chime press and hold down the "C" key until the spinning gear appears beneath the dark gray Apple logo.
    If this still doesn't work then boot the computer into single-user mode by restarting and after the chime press and hold down the COMMAND-S keys until the computer starts up to a black screen with white print. At the prompt enter or paste in the following:
    /sbin/fsck -yf
    Press return and wait. If you receive a message that the drive required repairs, then re-run the above command line until you receive a message that says the filesystem is OK. If you have to repeat the command more than seven times without receiving a filesystem OK message, then that means the drive cannot be repaired by fsck. If you have a utility such as Disk Warrior 4.0 or TechTool Pro 4.5.2 then you can boot from their CDs and attempt to repair the drive. If either or both fail then the drive will need to be reformatted.
    I highly recommend backing up.
    Yes, you can boot from any external drive provided it has a bootable copy of OS X installed on it. If you have a second Mac with Firewire ports then you can connect it to the MBP via a Firewire cable. Boot the MBP into Target Disk Mode and the other computer normally. The MBP's hard drive should appear on the other computer's Desktop. You can then repair the drive using Disk Utility or other disk repair utility.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Can I use two My Cloud drives on MacBook Pro

    I currently use a 4TB My Cloud drive with my MacBook Pro. Great drive! I order another one yesterday, without first check to see if I can use two My Cloud drives on the same Mac. I want them to run as two independent NAS drives, and will not be daisy chaining them through a USB cable. Will this be possible?

    (Bennor beat me to the Post.   )

  • Can i use my galaxy note3 with my macbook pro?

    I have purchased a galaxy note3.
    can I use it with my macbook pro?

    Sure in some ways. What exactly do you want to do with the Note 3 and the Mac?

  • Can you use a regular mouse with a MacBook Pro?

    I have difficulty using the mouse that came with my father's Mac desktop. I just ordered a MacBook Pro and I'd like to know if
    I can use a regular mouse with it?

    Yes any brand mice work with all Mac computers.

  • Can I use this RAM for a 2010 MacBook Pro: Kingston 8GB (2 x 4GB) 204-Pin DDR3 SO-DIMM DDR3 1333?

    I don't want to waste money or ruin my MacBook Pro?
    Here are the specs:
    Kingston
    Model
    KVR1333D3SOK2/8GR
    Type
    204-Pin DDR3 SO-DIMM
    Tech Spec
    Capacity
    8GB (2 x 4GB)
    Speed
    DDR3 1333
    Cas Latency
    9
    Voltage
    1.5V
    ECC
    No
    Buffered/Registered
    Unbuffered
    Multi-channel Kit
    Dual Channel Kit

    No you can not use it.  Your mac uses DDR3 1066, not 1333.  You need this type of ram:
    204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

Maybe you are looking for

  • FAN ERROR

    FAN ERROR displays today, previous the fan was running noisily..now screen resolution is poor... will this crash my laptop?

  • How to print new line in webdynpro

    Friends, I want to print a success message in new line, the below shown is a one singe line and want to split two lines. I used this: wdComponentAPI.getMessageManager().reportSuccess("Example : this is the test message i would like to print in two li

  • HP Officejet Printing Problem

    I can't get my HP Officejet 4620 printer to work with Mavericks. Any suggestions?

  • How can I playback blu-ray .img files generated by Final Cut Pro X?

    When I share a Final Cut Pro X project in Blu-ray and I set the output device as Hard drive (blu-ray), it creates a blu-ray image with a .img extension. By the way, the project's clips are AVCHD (.mts extension) and the settings are set to 1080i (144

  • Typewriter Toolbar Not Functioning

    Since installing the latest update of Acrobat 9 (9.4.3 on Mac OS 10.6.7) the typwriter toolbar is inactive.  I can create typewriter boxes and fill them with text, but all of the format options on the toolbar are greyed out.  It wouldn't be so bad, e