Can I use USB 3 with my 2.8Ghz Quad-core
I have an early 2008, 2.8 GHz Quad-Core Intel Xeon Mac Pro, can I use USB3 Devices with it?
Yes, they are all backward-compatible.
If you wnat USB-3 speed, you would need a PCIe card.
Similar Messages
-
Retina 5K display: can I use this with my MacPro 2006 Quad 8 core?
Dear Community
I have a MacPro early 2008 2 x 2.8 GHz Quad-Core Intel Xeon; ATI Radeon HD 2600 XT 256 MB: 20-inch DVI (1680 x 1050).
Is it possible to upgrade to the new 5K Retina Display?
Regards
SteveSteve ~ There is no new Apple 5K Retina Display as such, i.e. an Apple 5K Retina monitor to connect to a Mac Pro. There is a new iMac with Retina 5K display, but my understanding is that it cannot be used as a monitor. And if Apple were to produce a new Retina 5K version of their current Apple Thunderbolt Display (which is a monitor), I doubt a 2006 or 2008 Mac Pro could drive it.
-
Can I use snow leopard on my intel quad core pc
Fed up with Microsoft however don't really want to junk the PC. Can I install snow leopard on this PC? Is there anything else that I need? I am not a teccy
Snow Tiger wrote:
Can I install snow leopard on this PC?
no. -
Can i use USB 2.00 or USB 3.00 with my laptop? How do I know which USB ports my laptop has? MacBookPro7,1 Processor Name:
Intel Core 2 DMacBookPro7,1
Your computer has USB 2.0 ports. You can use USB 3.0 devices with it, but at the speed of USB 2.0.
(103917) -
How can I use USB interface in Labview?
Hi.
Does labview allow to USB interface?
I have been seen allowing GPIB and RS232.
I'm beginer at Labview and wanna use USB interface for my target system and pc.
I wanna know how to labview interfaces from target system to pc.
And if Labview doesn't provide USB interface module, how can I use USB?
Is using a USB at Labview hard to beginer?
Plz, answer to my quetion.
sorry, my English is very poor.
thx for reading my article.You can access devices connected to the USB port, but not in the same way as you would a GPIB or RS232 device. There are no USB drivers like there is VISA for GPIB or serial. Rather devices that plug into the USB appear to the systen as some sort of standard resource like a printer, disk drive or IO board. LabVIEW then interacts with these devices as it would any other device of the same type.Look at it this way, if you have a USB daq device you will access it through MAX the same as if it were a plugin card. Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
On my Mac Pro, early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb. The Raid card Raid 5ed them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?
You don't see drives when using a hardware RAID only the volumes.
WD Green are not suitable for hardware RAID (or software RAID for that matter).
USB2 and TimeMachine are a disaster waiting to happen. I've used SATA (internal) and eSATA (using SATA PCIe cards) trouble-free.
I can't say I begin to understand your use or "choosing the install drive for the backup"
Install what?
You don't load TimeMachine. Maybe seems minor but that is not how to describe the behavior of software.
You read FAQ and How To http://www.apple.com/support/timemachine
Time Machine’s Gory Details:
https://www.apple.com/support/timemachine/
TimeMachine 101
https://support.apple.com/kb/HT1427
Lion Recovry & TimeMachine
http://www.apple.com/support/lion/installrecovery/
http://www.apple.com/support/lion/
How To Restore Your System
http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
Pondini's Blog: Time Machine - Troubleshooting -- B5. Would you like to inherit (or re-use) the backup . . . ? -
I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way? I appreciate that it is a different computer but I am now the end user of both devices and I was just wondering if it was possible.
Thanks,
SeanThe answer would be in your software license agreement for Aperture. However if you cannot locate it you can ask in the Aperture forum, the link for that is:
https://discussions.apple.com/community/professional_applications/aperture
However I believe you can have Aperture installed on two machines however only one may be using it at a time.
On the new iMac launch the Mac App Store - Purchased - look for Aperture and download to your new machine. -
I installed 5 but now I can't use it with Mac osx - how do I go back to my old version?!
I was prompted to install Firefox 5 on my Mac. Now when I try to open it says I can't use Firefox with osx. How do I go back to using the previous version - has it been written over? My previous version was fine!
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?
try
http://support.apple.com/kb/ht2589 -
How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=yThanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
> -
How can I use Bluetooth with another devices?
How can I use Bluetooth with another devices?
You can set up your FaceTime account in Settings > FaceTime.
-
How can i use ipad with apple tv
How can i use ipad with appletv
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices. -
How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices? Mountain Lion is not an option for my older model and Lion is no longer available at App store.
Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).
-
Can i use pandrive with iPad, i want to access word, excel, pdf files on iPad via pandrive
You cannot use pendriver.
Have a look at the following:
http://itunes.apple.com/sg/app/quickoffice-pro-hd-edit-office/id376212724?mt=8&l s=1
http://itunes.apple.com/sg/app/office2-hd/id364361728?mt=8&ls=1
http://itunes.apple.com/sg/app/documents-to-go-premium-office/id317107309?mt=8&l s=1
http://itunes.apple.com/sg/app/polaris-office/id513188658?mt=8&ls=1 -
my iPhoto icon has a cross over it, when i open it, it You have “iPhoto” 9.2.1. you can't use this with this version of OSX? it used to work ?what's gone wrong?
iPhoto 9.2.3 is incompatible with MacOS 10.9.3 Mavericks. If you are running Mavericks on your system you need to update iPhoto to 9.5.1. Only, the problem is, that this version is no longer available at the App Store.
The easiest way to get a compatible iPhoto version in that case would be to upgrade to Yosemite, MacOS X 10.10, and then download the most recent iPhoto version from the AppStore, iiPhoto 9.6, like LarryHN suggested.
If you cannot download iPhoto after upgrading to iPhoto 9.6 post back.
Maybe you are looking for
-
Unable to open local file using af:goLink and anchor link in JSF page.
Hi, I want to open a file at a perticular location on client machine. I am using af:goLink to openg the file. But when i tried to click on the link it is not opening the file. If i give any other value like name of other site, it opens the link. It i
-
I can turn it back on but when it's on the charger it just soon turns off again. Not sure if the new update is the cause of this or not. Any solutions?
-
How to covert wmv with Flip4Mac
Can someone help me with it. I want to play mwv files on my i-pod and I know that I need to convert it. I already upgrated flip4mac but I still don't know how to convert the file. I am new to the mac system and it's very confusing.
-
What is the disadvantage of BAPI...?
what is the disadvantage of using BAPI....? Moderator Message: Please read the [Forum ROE|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] before posting Edited by: Suhas Saha on Jun 22, 2011 4:57 PM
-
Java/html: append information to html file at top, head tag
I've the following code, however I need to append to a specific location in the html doc, mainly the top, between the <head> tags. How can this be accomlished? import java.io.*; public class WriteToHTML { * @param args public static void main(String[