Can I use USB when wireless is down?

Can I use my USB cord for my wireless printer when the wireless connection is unavailable? Or do I can I only use one or the other ALL the time?
Jane
This question was solved.
View Solution.

Yes, the printer can handle both wireless and USB connections simultaneously.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

HT4628 I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken

I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken. The problem is happen recently, I have to use an independent wireless card now. Thanks!

When you enable Internet Sharing in OS X, you are creating a separate sub-net.
There is no option to allow this to be a simple pass-through from Ethernet to AirPort (or the other way).
The problem is easily solved by getting an inexpensive wireless router. You can replace your current router OR disable the DHCP server on the wireless router and allow the wireless clients to get an IP address from the current router.

Can iPad 2 use hardwired ISP? Can it use USB wi-fi boosters?

Can iPad 2 use hardwired ISP instead of wi-fi? Can I use USB wi-fi reception boosters on it?

You cannot use Ethernet modem. You need wireless ADSL router.
You can use Wireless Extender.
http://www.aztech.com/sg/homeplug_hl110ew.html

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Can i use a belkin wireless g router with an iMac

can i use a belkin wireless g router with an imac

It will work. The wireless card in iMacs (recent ones) work with n, g, and b networks. The g protocol is slower (54 mbs) versus n (130 mbs up to 300 mbs). My employer has hundreds of such access points and has been updating them all to n, but there are still some g routers they haven't gotten to, and they work fine. 54 mbs is not bad, it's about 5 megabytes/sec roughly. Typical actual throughput is lower than these numbers by ~ 50%, so doing a large Mac OS update download of 300 Megabytes would take about ~ 2 minutes with a g router, and maybe a bit less than 1 minute with an n router.

How can I use USB interface in Labview?

Hi.
Does labview allow to USB interface?
I have been seen allowing GPIB and RS232.
I'm beginer at Labview and wanna use USB interface for my target system and pc.
I wanna know how to labview interfaces from target system to pc.
And if Labview doesn't provide USB interface module, how can I use USB?
Is using a USB at Labview hard to beginer?
Plz, answer to my quetion.
sorry, my English is very poor.
thx for reading my article.

You can access devices connected to the USB port, but not in the same way as you would a GPIB or RS232 device. There are no USB drivers like there is VISA for GPIB or serial. Rather devices that plug into the USB appear to the systen as some sort of standard resource like a printer, disk drive or IO board. LabVIEW then interacts with these devices as it would any other device of the same type.Look at it this way, if you have a USB daq device you will access it through MAX the same as if it were a plugin card. Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

"you can't use Icloud when multiple versions of outlook is installed. As far as i know I only have 1 version installed. Any ideas

I have recently loaded Icloud and received the following message
"You can't use ICloud when multiple versions of Outlook are installed. To use ICloud with outlook uninstall one version" As far as I am aware I only have one version. Is there anyone who had a similar issue and if you did what is the solution?

You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

ICloud was working fine, suddenly when I try to sync I get this message "you can't use icloud when multiple versions of outlook are installed". I only have one version of outlook installed. Any suggestions?

iCloud was working fine, suddenly when I try to sync I get this message "you can't use icloud when multiple versions of outlook are installed". I only have one version of outlook installed. Any suggestions?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

HT1349 How do I find where my multiple copies of Outlook are? (It said Multiple Outlook versions installed. You can't use iCloud when multiple versions of Outlook are installed. To use iCloud with outlook, uninstall one version.")

I have just started with iCloud, and run into a problem from my PC.
It says: "
Multiple Outlook versions installed.
You can't use iCloud when multiple versions of Outlook are
installed. To use iCloud with outlook, uninstall one version.
I have searched and found two versions of Outlook 2013 and 2015 (one of which was inactive, but I have removed it), and one of outlook.pst, which I have removed.
Where do I go from here?

That's a Windows/Office problem. You should ask in the Microsoft support forums.

Can I use USB 3G data Modem on my iPad MINI as wifi is not Available everywhere?

Can I use USB 3G data Modem on my iPad MINI as wifi is not Available everywhere, I have just purchased one.

You can't connect a USB 3G dongle to an iPad, it won't be recognised. You can use an iPhone as a personal hotspot for the iPad (if you phone carrier supports it), or you can get mifi devices which act as mobile hotspots

I have a US iPhone 3GS made in 2011. Now in the Philippines I had it unlocked. Now Internet is turned off and no technician can turn it on. I can only use Internet when I have WiFi access. Any ideas?

I have a US iPhone 3GS made in 2011. Now in the Philippines I had it unlocked. Now Internet is turned off and no technician can turn it on. I can only use Internet when I have WiFi access. Any ideas?

Please define "I had it unlocked".
If it was not unlocked by AT&T, then it was hacked. Hacked and jailbroken phones can not be discussed here per the TOS.

Can you use a Epsom wireless printer to print from an iPad

Can you use an epson wireless printer to print from an iPaad

Yes.
Certain models are air print compliant, check your manual.
If not I'm not sure if Epson has an app, but there are third party printer apps such as Print n Share, Print Central and Printopia that should work for you (just to name the three most commonly recommended, there are plenty of apps so read the reviews and pick the one best for you)

Can i use USB 2.00 or USB 3.00 with my laptop? How do I know which USB ports my laptop has? MacBookPro7,1 Processor Name: Intel Core 2 D

Can i use USB 2.00 or USB 3.00 with my laptop? How do I know which USB ports my laptop has? MacBookPro7,1 Processor Name:
Intel Core 2 D

MacBookPro7,1
Your computer has USB 2.0 ports. You can use USB 3.0 devices with it, but at the speed of USB 2.0.
(103917)

Can't use F4 when try to test Z_INPUT_CUSTOMER function module

Hi!
I'm buy book "ABAP Objects" 2nd edition 2007 and try to make all exampless my self. All my examples have prefix Y (in program already used prefix Z by book authors). When i'm make reservation car example i have trouble to test my example with function module.
Can't use F4 when try to test Y_INPUT_CUSTOMER function module.
And i try to find error in Z_INPUT_CUSTOMERS. Bethween my program and builtint example i found 1 diffirence: built in example have object SREEN 1100 in tree OBJECT NAVIGATOR. When i try to make new srceen happents error (already exist). Because in module declared screen 1100.
How can i fix error?
Best Regards.
[email protected]

Hi!
Thank every one. I have found my mistake. I forgot to make search help for id in table customers.
Best regards.

HT4914 If i sign up to iTunes Match in the Uk can i use it when i am in the USA

If i sign up to iTunes Match in the Uk can i use it when i am in the USA

Here is the official answer, from the iTunes Store Terms and Conditions:
"iTunes Match is provided on an “AS IS” basis and may contain errors or inaccuracies that could cause failures, corruption or loss of data and/or information, including music, playlist, and play history, from your computer or device and from peripherals (including, without limitation, servers and other computers) connected thereto. You should back up all data and information on your computer or device and any peripherals prior to using iTunes Match. You expressly acknowledge and agree that all use of iTunes Match is at your sole risk."

Can I use USB when wireless is down?

Similar Messages

Maybe you are looking for