Can I use virtual bench to measure/communicate with other device by I2C etc?

Hi,
Can I use vitrual bench to measure I2C/SPI/CAN by digital I/O or logic analyzer?
And is it possible using digital I/O to communicate with other device by I2C etc?
Thanks,
Jimmy

You might be able to get it to work (not sure how fast the DIO on the Virtual Bench can go), but for I2C, I would recommend using something that is actually meant for it, like the USB-8451 or USB-8452.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

  • In the latest iOS updates, did Apple change the way Airplay communicate with other devices through Wifi?

    Short :
    In the latest iOS updates, did Apple change the way Airplay communicate with other devices through Wifi?
    Detailed:
    We had a glitch with our Apple TV 3A 3-4 weeks ago and had to factory reset it (we reconfigured it with the exact same configuration than before the crash), it's now running iOS 7.0.2, I can't saw which version it ran before the problem though.
    It's used in a business environment with 30+ iPads 2, half of them are updated to 8.1.1 and the other half to 8.1.2. We use the latest iTunes version.
    Before the glitch that required a reset, all the iPads were detecting and mirroring when needed to the Apple TV, but now the iPads don't see the Apple TV in their list of Airplay devices anymore (but they detect various other devices inside our network).
    I have to add that our Apple TV is able to navigate the movie store correctly, so I assume that it's not an internet restriction issue from our end (also, the APple TV do not see either any of the many iPads on its device-detection screen.
    We successfully connected an iPhone 5S and an iPhone 6 through P2P Airplay, so it's not the issue, but when we connected the iPhones to our Wifi network (Same as all the other devices are using) the Apple TV suddenly disappeared from the choices.
    Hence the reason why I inquire to the possibility that some changes were made in one of the latest iOS revisions, if so, we would require some details so we can adjust our Wifi configuration accordingly to allow the proper detection of devices.
    P.S. I tried the basic troubleshooting of Airplay problems with no avail. Airplay button is displaying on the control panel, Airplay do not show the Apple TV at all (so it's not either the trick to display the Mirroring button), we also already proceeded to the suggested devices reboots, so my issue is quite more complex I believe.
    Thanks in advance.

    PhotogYogi wrote:
    I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
    By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
    Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

  • Can't get wifi on iPhone but ok with other devices?

    At home can only rarely get wifi on iPhone 5 but no problem with iPad or laptop. So when update or download apps exceed 2G monthly allowance!

    Hi there Twin Elaine,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    -Griff W. 

  • Can BEA JMS C APIs be used to communicate with other JMS servers?

    Hello,
              Can BEA JMS C APIs be used to communicate with other JMS servers?
              If yes, is it enough to download, compile the JMS C APIs, and link the C applications to the libraries (shared or static) produced?
              If not, can you point me to an open source framework that can be used to enable C applications to communicate with JMS servers?
              I have HP-UX server that has both C and Java compilers (Java 1.5).

    The JMS C client is a pre-compiled library - we don't supply the source - so C applications link to it. If I recall correctly, there is an HP version. The C client library is actually thin layer that uses JNI to directly invoke a Java JMS client running in an embedded JVM.
              The library might work with other vendor's Java JMS clients, but BEA does not officially support this usage.
              Tom

  • Hi, Cannot communicate with other instrument devices (Using AT-GPIB card)

    Using AT-GPIB card to communicate with instruments that the running program is in C. After installed 488.2 software and test Hardware Diagnostic Test and Software Diagnostic Test. Everything is OK but after I run execute file the errors appeared. They displayed "GPIB cannot find Amplifier,or Unidex". My main task is transfer the AT-GPIB card from PC 386 to PC windows 98. Please help me to solve these problems. May I still use the old execute file to put in drive C in new PC Wins 98 and run that program. Thanks

    Hi,
    It is hard to say what this could be. Everything tests OK so it is likely that your card is correct. Does MAX detect the instruments? I am not familiar with that error message. Is it the output of some custom program or the driver itself? It seems like it is not a driver level problem, but it is hard to say given the information.
    By "May I still use the old execute file to put in drive C in new PC Wins 98 and run that program" do you mean keep an old application? If yes, then you should be able to use the old applicatoin with teh win98 driver. If you are refering to the driver itself, then no. You will need the windows 98 driver. This can be found at http://www.ni.com/support/gpib/versions.htm
    Hope this helps out.
    Best Regards,
    Aaron K.
    A
    pplication Engineer
    National Instruments

  • Can't communicate with other hosts from primary domain.

    Hi all, I add vsw0 as below:
    ldm add-vsw net-dev=e1000g0 primary-vsw0 primary
    ifconfig vsw0 plumb
    ifconfig e1000g0 down unplumb
    ifconfig vsw0 (ipaddressofserver) netmask 255.255.224.0 broadcast + up
    mv /etc/hostname.e1000g0 /etc/hostname.vsw0
    init 6
    but now I can't communicate with other hosts from primary domain,if I plumb and up e1000g0 and down vsw0 ,everything is OK,what's wrong with it?Thanks.

    This is greate!I replaced e1000g0 with vsw0 now.
    Could ldm automatic update the ldm configuration parameters?I created a file for the virtual disk,the output of ldm list-bindings as below:
    ......................ignore.............................
    Vdisk: disk0 vol0@primary-vds0
    service: primary-vds0 @ primary
    ......................ignore.................................
    but when I updated some other parameters such as vsw,vnet,the vol0 became:
    .................ignore.........................
    Vdisk: disk0 primary-vds0-vol0@primary-vds0
    service: primary-vds0
    .......................ignore........................................
    and the same time the primary-vds0-vol0 link with /dev/zvol/rdsk/domdisk/dom1,so the guest domain couldn't get the boot disk,I had to update it manunally.
    Did you have the same issue?
    Greetings fenglimian.

  • Which Port used by Integration Builder to communicate with JMS service

    Hi,
    Anybody know which port that used by Integration builder to communicate with JMS service in XI server in order to activate changes list.
    Thank you and Regards
    Fernand

    The main cause is not the communication problem between Integration builder and JMS provider but the inconsistent SLD contents.
    Now i can activate my object in the integration builder. see SAP Notes 764176
    Best Regards
    Fernand

  • Can u use more than one apple account on your device and itunes

    Can u use more than one apple account on your device and itunes

    Yes, but you have to logout of one, and login to the other.
    If it is an iPhone/iPad/iPod Touch and you buy apps on different accounts, when it comes time to update an app, you have to specify the password for the account used to acquirer the app. You change an iOS account via Settings -> Store -> Apple ID (tap on it), and start by logging out and then you can enter the other Id
    So it is possible, but it can also be a pain.

  • Can I use more than one iTunes account with my apple TV?

    Can I use more than one iTunes account with my apple TV?

    That depends what you mean. If you mean can you purchase from more than one iTunes account on the Apple TV, then the answer is no. If you mean can you stream from more than one iTunes library, which use different accounts, then the answer is yes, so long as they both use the same ID and password for homesharing.

  • Can I use ARD to control my mac with Back to my Mac service?

    Can I use ARD to control my mac with Back to my Mac service?
    The with Back to my Mac service on you see your mac in the Shared column, hit Share Screen & your good - on ARD I don't see my remote Mac listed anywhere in that program.
    Thanks

    ARD, to the best of my knowledge, does not work via Back To My Mac. Certainly it's not an direct or obvious feature, though I can't say that there might not be a workaround I've not heard of.

  • Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both

    Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both. Want to give one to wife.do I need to open a new iTunes account for her?

    bashepard wrote:
    Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both.
    Yes, No problem at all.
    Want to give one to wife.do I need to open a new iTunes account for her?
    No - you can share the same iTunes account (my wife and I share the same account). But when you sync the iPads, just remember to select the correct content for her iPad and the correct content for your iPad.

  • Can i use an old eprint email account with a new printer?

    can i use an old eprint email account with a new printer?

    Hello arbazu,
    Unfortunately, when setting up a new/replacement printer, you wont be able to use the same email address, nor can it be transferred to another printer. Once an email is used, the email address itself is not able to be used for a certain period of time (which I believe is 6 months).
    However, by creating a new email address, but adding an 01 or 02 at the end, you can get something very similar to what you had previously.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • How many devices can I use my creative account (student account), including mobile devices?

    How many devices can I use my creative account (student account), including mobile devices?

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each
    -Both computer Cloud subscriptions may not be in use at the same time
    -http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

  • Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable?

    Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable? I have a double ended USB connector if necessary.

    No.
    You need to use this.
    http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a
    or this
    http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a

  • Time Machine: Can I use a smaller external hard drive with larger internal?

    Can I use a 250G external hard drive with and 500G unfilled internal drive with time machine? Or will time machine require I a 500G? I don't plan on filling the internal drive for a long time and don't want to buy a new external drive right now.

    Yes, but you are very likely to get in trouble very quickly.
    The problem is that TimeMachine saves multiple versions of any file modified, and if that file happens to be large, you can quickly fill up your TimeMachine drive such that it is throwing away older versions faster than you would desire.
    Also if your boot drive's storage usage gets even close to the 250GB external drive's capacity, TimeMachine is likely to stop working.
    If possible, I would suggest an external drive that is twice as large as your boot drive, or at least 1.5 times larger.
    I guess you could repartition your boot drive so it is smaller than your external disk so you would be less likely to use more space than could fit on the external.
    Personally, my opinion about backups is that much of my data is impossible to replace (family pictures, etc...), and spending money on backup hardware is a small price to pay for securing those memories. I also try to have it backup in more than one location in more than one way.

Maybe you are looking for