Can I use Wake-On-LAN with P1606dn Printer?

I have a P1606dn laser printer which is remotely located and the power is remotely switched. 
When it is first powered up, the button on the front has to be pressed to cajole the printer into life .  It lights up green and we are good to go.  After this, even if it has dropped into power saving mode, sending a print commnad wakes it up and network printing works fine.
However, I want to do away with the walk to press the button when it is first powered up.  I've tried using a Wake-On-LAN command to the IP and MAC addess of the printer, but nothing happens. 
I realise I could leave it permananetly powered but don't want to do this because there are other devices on the same supply that need to be turned off at night.
How can I get it to wake up remotely?
many thanks.
This question was solved.
View Solution.

Whenever power is first applied to the P1606dn, that has been in a no-power state, the unit is turned Off. The unit's power light may be on, but the unit itself is off. Whenever you press the button, then the unit goes through the power up and obtains the IP address to function.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

  • H55M-E21 LAN off (LED off) in S3 state, can't use wake on LAN (WOL)

    I'm using H55M-E21 and Win7.
    I can put PC to sleep mode (S3) and can wake it up by PS2 keyboard. Now I want to try remote desktop to wake up and connect to the slept PC. I can't connect to it.
    The LAN link is down, the link LED from the back of PC is off.
    In BIOS -> Power management -> ACPI on, BIOS on, ACPI Stanby state = S3, EuP2013 diabled
    In Wakeup Event -> Resume by PCIor PCI-E device enbled.
    Please help.

    There are a few things you should check.  Go into device manager and open the properties for the NIC you are using for this remote connection.  First click on the Power Management tab and make sure the options are checked to "Allow this device to wake the computer".  I would uncheck the option to "Allow the computer to turn off this device to save power" if it won't work while it's checked.  You should also check the magic packet box.
    Click on the Advanced tab and enable the option for "Wake on Magic Packet" and "Wake on pattern match".  I can't recall if the "Shutdown Wake-On-Lan" option is supposed to be enabled or disabled but try enabled first.
    - D

  • How i can use "wake on lan" with time capsule

    1. Preference -> Energy Saver -> Options -> WOL check
    2. in airport utility
    internet>nat>defalt host check
    3.and I'd send magic packet.
    but it doesn't work
    How i can wake on my mac through time capsule.

    Can you be more specific ?
    Where do you send the WOL from? Another computer? From the same network? How are each machines connected ?

  • My mac pro (SL 10.6.8) wakes up every minutes when I use wake on lan and share a HD. when I unplug the ethernet it doesn't wake so I suppose that some thing wakes it up on my network ( 2 mac books, 2 iPads and 2 time capsules !) How can I fix that?

    Hy ,
    My mac pro (SL 10.6.8) wakes up every minutes when I use wake on lan and I share one of my Hard Drive.
    When I unplug the ethernet cable it doesn't wake any more so I suppose that some thing wakes it up on my network ( 1 printer canon MP620, 2 mac books, 2 iPads, 2 IPhones and 2 time capsules !) ...even when all these devices are "sleeping" 
    Any idea?
    THKS
    Phil
    PS .: I'm french so my english is probably quite strange ! ... Sorry for that

    Sorry - posted this in the wrong forum. Reposted in Mac Pro.

  • Can't get wake on lan to work on Hp n40l microserver

    Hello
    I installed arch on my HP proliant microserver and I can not get Wake on lan to work. I tested my device with ethtool and it supports and is enabled for WOL with g value set for both.
    But whenever I power it off by systemctl poweroff I can no longer see it as a connected device to my router
    Before installing arch I tried ubuntu for testing the hardware quickly and I got wake on lan working there. I can not figure out what might be the issue here. Wake on lan is enabled in the BIOS.
    Any help would be appreciated
    Cheers

    As I see in the Archwiki , the wol package would also need the IP address ( though not necessary ) along with the mac address of the server.
    I fear that the nic on the server does not obtain an ip in shutdown state, since I can't see it in my attached devices in the router settings( I could be very wrong ! )
    Tried using wol on a laptop running arch, but with no luck.
    I have seen this workaround in several places
    https://bugs.launchpad.net/ubuntu/+sour … bug/981461
    I even tried creating a similar script which would first do
    ip link set dev enp2s0 down
    systemctl poweroff
    but that did not work either.
    Cheers
    Last edited by ayushjsh (2013-04-03 07:00:28)

  • MSI K8N Neo2 Platinum (WAKE On Lan with Realtek)?

    Hello can the MSI K8N Neo2 Platinum (BIOS 1.B) WAKE On Lan with the Realtek card?
    It does not appear to work for me and there is nothing in the BIOS.
    My WOL packets wake up other PC's.
    Please Help.

    Hello !
    Go into Bios Setup, Integrated Periphals, and disable the nvidia Lan, but let the Onboard LAN enabled.
    Now go to PCI Configuration, Wakeup Events, and enable wakeup on PCI event and wake on LAN.
    Check in Boot Order Menu if you can select the realtek onboard Lan as first booting device, push it in first place.
    Another Option could be using the nvidia Lan, its reported to work with wakeon lan.
    Greetz

  • Can i use my time capsule with virgin wifi hub

    can i use 2tb time capsule with virgin media wifi hub router

    Yes, but it will need to connect to the Virgin router using a permanent wired Ethernet cable connection from one of the LAN <--> ports on the Virgin router to the WAN "O" port on the Time Capsule.

  • How can I use my Apple ID with 2 Apple devices?

    I just got an ipad mini and I registered it with the same Apple ID I use for my iphone 4s. Everything was fine until I downloaded apps to the ipad and noticed that the ones I had on both devices  no longer opened on my iphone. Why is this? How can I use my Apple ID with 2 Apple devices and how can I recover my apps on my iphone?

    I've had an iPad for almost two years. When I purchased an iPhone last fall I set it up to use the same Apple ID as my iPhone. I've had no problems doing this. Try resetting each device and see what happens.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • How can i use my apple ID with the itune store over my windows laptop

    how can i use my apple ID with the itune store over my windows laptop

    If you don't have iTunes installed on your laptop then you can download and install it from here : http://www.apple.com/itunes/download/
    You can then log into your account on it via the Store > Sign In menu option (on iTunes 11 on a PC you can get the menus to show via control-B) :
    And you can then select the Store on the left-hand sidebar (you can enable the sidebar via control-S), and then browse items in the store and buy them by clickin on their price.

  • Can I use an USB disc with my macbook pro bought in 2005.  What capacity will it take 2.00 or 3.00?

    can I use an USB disc with my macbook pro bought in 2005.  What capacity will it take 2.00 or 3.00?

    The first MacBook Pro's were not released until the beginning of 2006, and they had USB 2 ports.
    Anything available new in 2005 would have been a PowerBook G4 and they also had USB 2 ports.
    A USB 3 disk will just transfer data slower then it could do, if you plug it into a USB 2 port though, so you can buy either.

  • I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    do I need to create another account with a different email account
    Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

  • How can I use my time capsule with windows7

    How can I use my time capsule with windows7?

    This is asked regularly.
    https://discussions.apple.com/message/10978060#10978060
    Look at the more like this. On the right column next to the post.
    Load airport utility for windows.. which will also load bonjour for windows.
    In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

  • New to Apple products (finally) - can I use my Itunes account with multiple products e.g. Iphone and Ipad?

    New to Apple products (finally) - can I use my Itunes account with multiple products e.g. Iphone and Ipad?

    Oh yes! Apple will be happy for you to buy as many Apple products as you can afford.
    As and when needed, each can be given its own selections of content to sync with.
    tt2

  • Can i use two apple tvs with one itunes account?

    can i use two apple tvs with one itunes account?

    yes and you can use more then 2
    just don't give them the same name

  • Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?

    Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
    I have 2 and cannot seem to get them to work?

    Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
    I have 2 and cannot seem to get them to work?

Maybe you are looking for

  • What is best analog to digital devise for Final Cut?

    I'm using MYTV to transfer anolgue video tape to FC Express, and I can't get any audio. Is there a better devise that is compatible with Apple?

  • Sequence value changes while i view the document

    hi., I m using jdev 11.1.1.5 I had created a sequence for GlHdEO.GlJrnlNo I had used this code for the sequence in impl method of that entity object         SequenceImpl s = new SequenceImpl("jrnl_no",getDBTransaction());         setGjhJrnlNo(s.getSe

  • No color on screen, cannot get to menu

    I just received an ipod 4gb nano. the first day it worked fine, last night itunes would not recognize my ipod. I went through all of the Rs, reinstalled itunes, etc. Nothing! Now, after using the 3-23 update, my screen has no color and says "ok to di

  • Deploy; JDev grabs focus back when done.

    Is there any way to make JDEV not grab focus back when a deployment is complete? ISSUE: A deployment takes minutes. I use my PC to do other things while deployment ( and compiling ) is going on... like email, write on this board, etc. I can do this w

  • Playing swf on different states....

    Hi, I'm trying to setup a game in different states. Nothing crazy, just a real dumbed down protoype with buttons that switch to states. I'm pretty well versed in Flash and actionscript but for the life of me I cannot get the swf to play if it is on a