Can I wirelessly partition Time Machine if so how?

I have the new Time Machine with the airport extreme built in.
I want to create a partition on it to archive a few documents that I don't want Time Machine to erase when it is full. It is 500mb model and I would like to create a 200mb partition for archiving.
I looked under Disk Utility in applications but it does not show the Time Machine disk.....
Any ideas?? Thanks Guys and Gals

Joe Batt wrote:
I have the new Time Machine with the airport extreme built in.
what do you men by that?? do you mean you has a USN drive attached to an Airport Extreme Base Station?
I want to create a partition on it to archive a few documents that I don't want Time Machine to erase when it is full. It is 500mb model and I would like to create a 200mb partition for archiving.
I looked under Disk Utility in applications but it does not show the Time Machine disk.....
you can't partition remote drives. you have to move the drive to be directly attached to the computer and then you can partition it.
Any ideas?? Thanks Guys and Gals

Similar Messages

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

Can I have mavericks time machine on one partition of a WD external hard drive and snow leopard data on another

can I have mavericks time machine on one partition of a WD external hard drive and snow leopard data on another

If you want to and it is so large that it has room (350% is a good estimate for TimeMachine), then use a partition(s) to hold system restore images or bootable clones. Or VM images.
Using SSDs most Mac Pro models can easily hold 6 or more storage devices inside, except the nMP cylinder 6,1's; which do need external Thunderbolt and USB3.
System drive / data / scratch / backup data / backups of system / ....
I recommend a couple system backups, especially when faced with dual boot situations as well as an OS that is still undergoing updates and changes.

After a clean install, how can I continue using Time Machine?

After a clean install, how can I continue using Time Machine?
I booted from my recovery partition, erased my HD, installed the same OS, (Lion, 10.7.5) then restored from my TM.
If it asks if i want to use TM, I say yes. When I chose the drive, it seems to want to start all over, instead of just picking up where I left off.
Is there any way of picking up where I left off?

Hi Frank,
You are sure you looking in your Library in /Users/YOUR_USERNAME/Library and not /Library at the top level of your harddrive?
When you open iCal what do you see? Are the calendars the two default Home and Work ones?
I really appreciate the responses -- especially if you are in the UK as opposed to Ontario.
Why, do you have something against London Ontario?
John M

Can I have several Time Machines in Mavericks?

I have several boot partitions over several disks. Am I allowed to have more than one Time Machine partition - each backing up different drives?
The same question was ever asked against Snow Leopard here, and the answer was no, "You can't have more than one Time Machine destination disk active at any one time."
Is it still the same limit today for Mavericks?
I have 1 x SSD and 3 x HDD, I just want to use one 1TB HD to back up the 500GB SSD, and the 4TB HD to back up the 2TB HD.
Possible please?
Thanks heaps in advance.

Called Apple Care Support and confirmed that only one Time Machine backup can be active, in other words, only one destination drive can used to perform Time Machine backup automatically.
Therefore I had to hoose the largest internal HD (4 TB) to back up all other drives (total 2.5 TB).
Barney-15E wrote:
I don't think this was the question you were asking, but you can have multiple backup drives, now, but they are just redundant backups, not different backups.

Can I use my Time Machine as an airport to print from my Ipad?

I want to use the airprint, but my printer does not have that utility. I read in another apple support, that I could use a computer as an airport.
Can I use my Time Machine as an airport for the airprint, between my Ipad and my printer?

No. Time Machine is just backup software. If you have a networkable printer that you can connect to the computer then you could possibly print to it wirelessly via your network if you enable printer sharing in your router.

How can I get my time machine to allow me to recover files again? After upgrading to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.

How can I get my time machine to allow me to recover files again?
After upgrading MBA to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.
I've searched and can not find a solution to the problem that's being encountered.

Yeap that all makes sense now.
Do you only have the current backup showing in the TM display?? Won't it fill in the rest?
Over wireless are you waiting for the indexing to finish.. ??
Previous backup may not show for a couple of hours.
Long short of it.. Mavericks version of TM is a pain.
Sometimes it is easier to completely ignore the TM backup and do the restore manually.
I have posted the details here. See if this helps.
Can't access old files on time capsule

Can I use my time machine backup to migrate my files to macbook pro retina from my macbook pro 15 inch?

I'm using a macbook pro 15 inch mid 2011 running on mountain lion.
I have a complete backup of my files on time machine. If I get a macbook retina, whats the best way ti migrate?
Can I use my time machine to restore to the new retina mac?
Thanks

I'd just use the Time Machine restore function when setting up your new machine. If you don't have the TB>FW adapter, how do you plan to connect to your external drive with your TM backup? You may have to resort to Migration Assistant - but it would be helpful if you had the TB>Ethernet adapter so that you could hardwire both machines to your router - going wireless is going to take a long, long time. If your external has a USB port, you could use that for a TM restore...
Clinton

Can i transfer my time machine backup to another drive?

can i transfer my time machine backup to another drive?

Did you prep the new drive?
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
New drives usually are pre-formatted for Windows, not Macs. WD is generally well known for their poor level of Mac support.

Why can't i find Time Machine Back Up Device in Hard Drive

Why can't i find Time Machine Device in Hard Drive when i have plugged it already. White light just keeps on blinking.

Understanding and resolving a blinking status light
Here are the reasons that the status light may blink:
Your Time Capsule has detected that the internal hard drive has reported a SMART error
The base station has not yet been configured
The base station has been reset.
A new firmware update is available for the base station.
No IP address is available for the base station.
A Wi-Fi base station in Extended Mode is out-of-network Wi-Fi range of a primary Wi-Fi base station.
The WAN Ethernet cable is unplugged from the Wi-Fi base station.
The Wi-Fi base station lacks a path to the Internet (or local router).
Internet access may be temporarily unavailable from your Internet Service Provider (ISP).
A persistent, blinking, amber status light indicates that your base station may require your attention.
How to resolve a blinking amber status light alert
Launch AirPort Utility to determine why your base station status light is blinking amber.
AirPort Utility opens automatically if your Wi-Fi base station requires your attention. You may also choose to launch AirPort Utility at any time.
In the AirPort Utility window, locate your Wi-Fi base station and double-click on it to open the Summary window. Note: If you have more than one Wi-Fi base station, double-click on the icon for the Wi-Fi base station that has the amber circle next to it.
When the Summary window appears, double-click the amber circle to the right of Wi-Fi base station Status to open the Status window.
The Status window lists any conditions that require your attention. Respond to each item until there are no more items listed.
Eliminating the blinking, amber status light may require making changes to a specific setting, or putting a checkmark in the "Ignore" checkbox beside any option you don't wish to change. A checkmark simply tells the AirPort that you are aware of the issue and you have chosen to ignore it. For example, you may wish to leave your AirPort open without a password so that anyone can join your wireless network.
Click Update to apply your changes (the base station will restart).
After the base station has restarted, the status light should be green and not blinking. If the status light stays amber in color and blinks after the Wi-Fi base station restarts, you may repeat the steps above.

Can people see my Time Machine back ups?

If people are connected to my wireless network, are they able to access the contents of what is in my Time Machine drive? I know there is no way to actually encrypt or password protect it, so I am worried about people being able to see my personal information. Thanks!

Can people see my Time Machine backups?
No, not unless they are logged on as you from your Mac.....or they go through a really convoluted process that would still require that they know the main admin password of your Mac.

How can I copy a time machine backup from one Time Capsule to another ?

How can I copy a time machine backup from one Time Capsule to another ? I bought a 1 Tb Time Capsule to replace my 512Mb Time Capsule. Now, I like to copy my time machine backup from the old Time Capsule to the new one so I can keep using my backup.

from this support article:
(click on image to enlarge)

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

HT4859 How do I back up my documents from my Macbook on iCloud? or can I only use time machine or external HD?

How do I back up my documents from my Macbook on iCloud? or can I only use time machine or external HD?
I think I have missed something in trying to read all of the pages on apple site about icloud.

Welcome to the Apple Community.
You can't back up a computer to iCloud.
You can use any back up software, you should always back up to a different drive.

How can I use the Time Machine Backups from my Old Computer?

I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
Thanks
Richard

Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
http://www.macosxhints.com/article.php?story=20080128003716101
It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

Can I wirelessly partition Time Machine if so how?

Similar Messages

Maybe you are looking for