Can I write and illustrate a childrens book in Author I Book?

I have written and have my illustration for a childrens book..can I use the Author I Books to upload my drawings and story and will it create my book with these so I can publish to Apple and perhaps Amazon?

You can't publish to Amazon if you create your book with iBooks Author, only to Apple.
You should be able to use iBA. Try it, it's free.
http://www.apple.com/ibooks-author/?cid=wwa-us-kwg-features-com
http://www.apple.com/itunes/working-itunes/sell-content/books/book-faq.html

Similar Messages

What apps can I use to both write and illustrate my book.

I am hoping to learn what apps can help me both write and illustrate my book.

I have tried that before, for some reason it dosent work for me. How about some paying ones? Someone told me about Foxtube, is it worth it?

How can i write and read the same data

hi,
         i have attached my program to this mail. i have some problems in this program.
problems:
1. I want to select the threshold for the rms,varience and s.d.
But what i used is not doing that. i want to fix the upper threshold value and lower threshold value.
when ever the input crosses upper threshold value i want the output and it will remains uptill the value above the lower threshold value.
Once it come down the lower threshold value the output should be stopped.
2. I want to write this in to a file and i want to read this file. is this possible or not.
            please try to help me i am very new with lab view6i
       REGARDS
CHAMARTHY KOMAL DILEEP.
   [email protected]
Attachments:
dileep.vi ‏93 KB

The easiest way to perform a certain action (such as file I/O) based on a certain condition (such as whether a value has passed a certain threshold) is to use a comparison VI in combination with a case structure. Then you can specify that if your rms, standard deviation and variance are above a threshold then perform a certain action.
Also consider using shift registers to keep track of data from the last loop. If I understand you correctly, you want to start logging data when an upper threshold has been passed. Then you want to continue logging data until a lower threshold is passed. I have attached a non-functional but explanatory VI that will help explain how to implement logic to that effect. It also demonstrates that you can indeed write and read from the same file in a loop. The best way to do this is to open the file before the loop, do all the necessary writing and reading in the loop, and then close the file after the loop.
Hope this helps!
Jarrod S.
National Instruments
Attachments:
dileep_example.vi ‏61 KB

Can I write and run simple java programs in Xcode

I need to write and run basic java programs on my mac. I would like to run it in Xcode, but I don't know how to set it up? Is there a way?

Read the following discussion from last month on here:
Can Xcode 4.5.1 compile/run java?

Can a "writer" and a "publisher" share the same copy of Contribute?

I will be having an intern writing copy, but then want a supervisor to approve and publish it using the same computer (and copy of Contribute). But when I try to import the second connection key, it threatens to override the first one. Is there a work-around so the intern/writer can leave a draft for the supervisor/publisher, who later signs into the website, approves, and publishes the pages?

Connecting to the same site with two different role in the same machine is not possible. It will ask for overridding the existing connection.
You can ask the writer to create the draft and send it for review to the Publisher by clicking the Send for Review button. So when the Publisher connects using his connection key, the draft sent by the Writer will appear in the pages panel. So he can review it and Publish the page.

Is there a app that allows you to download or create a template that you can both write and draw on?

Is there a iPad app available that allows you to download a template that you can both draw and type on and then save?

Here's a good site to search of apps... http://appshopper.com/

How can I write and read the LPT within JAVA?

Hello!
I'm new to JAVA.
I made a simple JAVA application with few buttons and labels with NetBeans.
I add ActionListener to button but don't know to write the handling code that should to write a byt to the DATA register in the LPT port of the PC box.
From where can I get the code for this, maybe within JDK documentation?
Any advices will be appreciated!
Regards, csPaul

I have ever programmed an LPT data sender using VB.net and inpout32.dll(will be very easy to search using google). for Java, try this:
http://www.geocities.com/Juanga69/parport/
I've just download the sample also, wanna try to...
And some people say that JNI allow us to embedd C++ code within our Java program.. I don't know about this yet...

How can i write and show RTL Html in DW CC 2014

hi
when i install adobe dreamwaver cc 2014 , i set the language to arabic ... but when i lunch a html file that have many many arabic and persian words (sentence) it's shows them incorrect
for example if arabic = english
" i'm Hossein "
but dw shows it " Hossein I'm "
How can i fix this?!
thanks

Try adding the following to the top of the style sheet
p, h1, h2, h3, h4, h5 {
direction: rtl;
Ben I'm

Finder can not find and display certain files. Why? Any fix,please?

I've discovered to my surprise that Finder can not find and display certain files. Computer is Mac book OS X (10.6.8)
No matter what Finder settings I use, there are files which it can not detect and display.
Here are just some examples of files sitting in the HD but Finder can not display them:
Located in preference panes :
fibre channel 1.7
Located in :    /Library/StartupItems/BRESINKx86Monitoring
BRESINKx86Monitoring
FxLicenseManager
Located in    /Library/StartupItems/FxLicenseManager
EAP8021X
Located in    /System/Library/PrivateFrameworks/EAP8021X.framework
The questions:
What to make of this inability of Finder to ,well, find? (again - I tried all possible settings of Finder!)
Is there any way to fix it?
Thanks for any competent suggestion!

Well, guys,
Interesting suggestions but the problem remains -Finder (aka Spotlight) is not capable to find certain files.Period.
I consider it as a fault of the system because in comparison, a search facility of a plain Windows based machine is capable to dig out and display any file, no matter now deeply hidden...
As far as the suggestion above by softwater goes , well, I've used the additional foptions extensively and nothing produced the result needed -that's why I created this discussion.
If someone still believes that using Finder with all its options is good enough, here is a test for you to perform on your own Mac:
-Open /Library/StartupItems/ and have a look inside - most likely you have a bunch of items. Write down the names of one or two of them. For this test I've chosen
FxLicenseManager located in    /Library/StartupItems/. You can use any file you want grom this location...
- Then go to Finder and set it to display everything in Library of the HD. Remember - for this test you pretend you don't know any file name in this folders.
If the Finder works properly it shall display folders of Library >Startup items with all stuff inside, including the FxLicenseManager file I used for this test.
Finder displayed nothing. It is obvious that for Finder, certain locations are off limits. That's why I consider Finder as a faulty.
Of course if someone can set the Finder's options to do the above search and succeed, I'll be glad to try ...:-)
At this point, what I gather from this discussion is that :
1. Finder (Spotlight) feature is not to be trusted,despite number of fancy but rather useless options.
2. If you need to really find everything usually not displayed by Finder you better get real searching software.

[SOLVED]trying to mount disk so all users can read write

I'm trying to mount my hard drive to /mnt/2TB automatically at startup. My /etc/fstab looks like this...
/dev/sda2 / ext4 errors=remount-ro 0 1
/dev/sdb1 /mnt/2TB ntfs auto,exec,rw,users,uid=1000 0 0
ls / shows...
drwxrwxrwx 3 root root 4096 Jun 30 20:09 mnt
ls /mnt shows...
drwxrwxrwx 1 root root 4096 Jun 20 21:21 2TB
When I restart the disk mounts fine but I cannot write anything to disk. I want to mount this disk so that anyone can read, write, and execute on it. I specified these options in my fstab. What options am I missing?
EDIT:
I figured it out. I had to install ntfs-3g. Once I did that I changed my fstab to this...
/dev/sda2 / ext4 errors=remount-ro 0 1
/dev/sdb1 /mnt/2TB ntfs-3g defaults,uid=1000 0 0
Then I changed /mnt permissions to ...
drwxr-xr-x 3 root root 4096 Jun 30 20:09 mnt
Then I changed /mnt/2TB permissions to...
drwxrwxrwx 1 necbot users 4096 Jun 20 21:21 2TB
Works great!
Last edited by necbot (2014-07-02 00:07:43)

I ran across this in the ntfs-3g manual which might be of some interest. It appears that adding "permissions" to the mount options for ntfs-3g might accomplish roughly what you want, but you may have to perform some work to get it operational. Likewise, the Windows ACL may interfere and a quick glance seems to me to suggest that you might have to tweak things from Windows to get the permissions working well.
I personally have all of my Windows partitions mounted under /windows, but I can see why that isn't an ideal solution if you're dabbling in Arch or have things you want to more easily share in one direction.
Hope this helps somewhat even though you've already marked the topic as solved.

Contacts are there, but can't read anything in it, and can't write either.

Hello,
Contacts are there, but i can't read anything in it, and can't write either.
The place where i should read Name, Family Name, mail adress, phone, etc is EMPTY ! All white ! The card got hos name, but there is nothing in.
I started to use my mac book and adress book too.
I use mac os X since the beginnning, and i never had this problem with it.
Can someone help me please !
Thanks

Sounds like the Font Cache has a corrupt font in it.
Try this:
http://www.ehow.com/how_7197467_rebuild-font-cache.html
If that one doesn't work, it could be the WPF font cache
http://support.microsoft.com/kb/937135
You'll have to delete the .dat files in C:\Windows\ServiceProfiles\LocalService\AppData\Local and restart the computer.

I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?

I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?

Rented movies downloaded to an Apple TV can't be transferred to any other device.
(86941)

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers.... How can we combine our purchases to use on all our devices. We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers.... How can we combine our purchases to use on all our devices. We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

Hello Halfback71,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Frequently asked questions about Apple ID
http://support.apple.com/kb/ht5622
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
Best of luck,
Mario

Can you run two songs at once? One to write and one to record?

I have dozens of midi objects, cable routings for writing and now have added dozens of audio tracks and inputs for recording my external and internal synths. (24 tracks in realtime one pass. Not bouncing but tracking. Its so cool.)
PROBLEM: As I improve the audio workflow in a song, importing that layer into older songs creates D.I.S.CO.R.D. (Digital Input Sequencer Copy Object Reassignment Disaster!)
QUERY: Can I just use one song for writing and playing and then run another "audio input based" song in the background locked via internal time code so it can RECORD or CAPTURE what this song plays?
Or is there finally a way to import audio layers without "rebuilding the whole house"?

Maybe I'm not understanding your difficulty, but I
don't see why you have to have multiple setups, or
copy/paste/import/whatever from one song to another.
..........Been tracking and mixing in the same sequence for
years.
Why? Well......
1) there's dozens of midi modules, virtual modules and custom transformer splitter objects at the writing stage,
2) dozens of tracks, input objects and reverb busses at the "tracking stage"
3) and multiple master inserts at the mixing and output stage that output anywhere from 2 to 24 stems with their own reverbs.
When the room works it works beautifully but there are different configurations of the above for a tv series gig, movie gig, album gig etc and I'd love to be able to change config 2 or 3 without having objects jumble all over config 1.
I write and work in combinations of old and new gear from Spectrasonics and NI softsynth engines to an Oberheim Expander Roland JX10 and and Yamaha TX 816s. They all have different personalities and all work reliably and have far outlived their sys ex storage software (remember Galaxy/Sounddiver? Bye Bye since System 10)
Last year I expelled my dig gear (after too many DAE errors for all that money) and I went MOTU native and love it. But I started one interface at a time and built up my new tricks and routings gradually. As a result everytime I add another MOTU interface and change some routings around all my songs have to be retaught new routings even when its just callin up a midi writing template. Hence the need for better importing of environents or a way to reliably alter one area of the above without having to recheck all the others. And it may mean a 2 computer rig. The second computer becomes the "multitrack/master recorder", and only changes during a major upgrade while midi modules and virtual synths can come and go on computer 1.
In a few weeks my studio setup tech will come in and we'll redo all our flow charts which I'll send to you if interested. Then you'll either empathize with my problem or think I'm nuts.
Thanks for your continued interest. Its nice to lament to someone who at least knows the vocabulary.
Amin
G5 dual 2.5 Mac OS X (10.3.9) Stylus AND my original Minimoog. Lots of MOTU. No more Digi.

Can I write and illustrate a childrens book in Author I Book?

Similar Messages

Maybe you are looking for