Can iCloud ID be used to activate MobileMe function in airport extreme?

There's a tab in the setting of airport utilities called "mobieme".
MobileMe is no longer accepting new subscribers and is moving to iCloud.
I have a iCloud ID, [email protected]
I use this ID and try to active the mobileme function in airport extreme.
It said this is not a vaid ID  of mobileme.
Since Mobileme is not accepting new subscribers, how can I active this function in airport extreme?
Dose anybody has suggestions for this problem?
Thanks a lot!

APPLE says:If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps:
Sign in to their iCloud account at www.icloud.com/find.
Select the device from their Find My iPhone device list by clicking All Devices at the top of the screen.
Erase the device by clicking the Erase button. This will erase all content and settings from the device. When prompted, do not enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device has been erased and removed from the account, you can proceed with the device setup process.
i forgot to erase the phone.i just removed it without erasing.

Similar Messages

  • Can iCloud be run using Windows XP at a limited capacity?

    Can iCloud be run using Windows XP at a limited capacity?

    Have a read here http://support.apple.com/kb/TS1722 for solution.
    Stefan

  • Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

    Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

    Yes, if the drive is formatted in Mac OS Extended (Journaled).
    The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

  • Can I use non-apple notebook to connect AirPort Extreme?

    I
    Can I use non-apple notebook to connect AirPort Extreme?

    He might be trying to do so to promote his products or may be there was some misunderstanding.
    Airport Extreme will work as a wireless router supporting upto 50 systems including Mac computers, PCs, iPad, iPhone, iPod touch, Apple TV and virtually all 802.11a/b/g/n Wi-Fi wireless devices — all at the same time.
    for reference http://store.apple.com/us/product/MD031LL/A/AirPort-Extreme

  • Using a router or switch with Airport Extreme

    I currently have an Airport Extreme 5th generation working great for my home network!  My ISP Modem (on ground floor "Level-B" of 3 story house including basement) attaches to the Airport Extreme via an ethernet cable into the WAN port.  Then each of the 3 LAN ports is in use:
    #1 going to my "main Mac" - MBP-13" just a few feet from the Airport Extreme in my lower level basement office (Level-A)
    #2 going upstairs to a non-WiFi eMac (Feb 2005) - that's on Level-C
    #3 going to my Canon MP640 printer/scanner so that I can use it for scanning (it is attached via USB to the Airport Extreme but that does not permit scanning)  This is located next to my MBP on Level-A
    OK but now I want to try to get my 1997 LaserWriter 12/640 PS (works great!) (and I have 2 expensive toner cartridges left!) set-up and I have some instructions on how to do this.  It will likely necessitate me having my Mac Pro G4-733 running OS 9.2.2 and the LW 12/640 both connected to my network via ethernet cables.  That's 5 connections and I only have 3 ports going out.
    But I do own a D-Link DIR-635 router and also an 8 port Peabird 8 por 10/100 Switch.  Can I use either of these to do the setup?
    OR - can I simply unplug the MP640 printer and the eMac for an hour or so that it will take to configure (if I can) the LW 12/640?
    OK but then if I do configure it, I won't need the G4-733 Power PC any longer, but I will want the LW 12/640 as part of my network so will at least need a 4th ethernet port at that time.  Do I then need to attach the router (or switch) and then connect the LW12/640 (and something else as the router or switch will use up one of the 3 Airport Extreme ethernet LAN ports…)
    Thanks for any comments on how to proceed here.
    Best regards,
    Steve Schulte
    Monday 14 January 2013

    Still have not found time to try to connect the Apple LaserWriter 12/640 but it is on my list-- have gotten that list down to just a few items--- so making progress!
    Now how to get my Apple Stock…………
    Best regards,
    Steve Schulte
    Thursday 24 January 2013

  • PC Used to work with XP and airport Extreme Basestation but not with Vista

    Please help, my PC Used to work with XP and airport Extreme Basestation but not now with Vista. I have a MacBook Pro connected and also a Mac Pro connected to the network on it and they still work, i have put the latest software on the PC and the firmware is up to date. The only thing i can see on the network on the PC is the basestation Hard Disk (shared also to the Macs) but i cannot connect with the password, i have tried everything in my knowledge, including formatting the machine and reinsatlling OS and changing security setting to no avail. Any ideas anyone?

    With regard to your printer problem - take a look at this discussion:
    http://discussions.apple.com/thread.jspa?messageID=6312413&tstart=0

  • Can I relace my BT Home Hub 2 with an Airport Extreme?

    Can I replace my BT Home Hub 2 with an Airport Extreme?

    No. The HomeHub has a built in modem that must be used to access your Internet service.
    The AirPort Extreme is only a router. It does not have a modem onboard.
    You could the AirPort Extreme with the HomeHub....but not instead of the HomeHub.

  • What is the maximum number of users that can be simultaneously connected to a shared drive on an Airport Extreme

    What is the maximum number of users that can be simultaneously connected to a shared drive on an Airport Extreme?

    50
    I haven't tried this, but imagine that things are going to be quite slow.

  • My iMac is able to use my wireless internet from my airport extreme, however, no other devices(iphone, ipod) will connect. The network shows up, but the indicator just spins without ever joining.

    My iMac is able to use my wireless internet from my airport extreme, however, no other devices(iphone, ipod) will connect. The network shows up, but the indicator just spins without ever joining.
    I have tried resetting my airport extreme, creating a new network, etc nothing seems to work.

    I have a feeling you may be stuck in bridge mode there...
    Factory reset the Extreme (so we don't second guess later), and re-set up the extreme using iOS5 on your iPhone.
    Set up your Wi-Fi network with your iPad, iPhone, iPod touch, or Mac.
    http://www.apple.com/airportexpress/features/easy-setup.html

  • Can I use an iPhone hotspot and the Airport Extreme's Wlan capabilities (excluding the internet function)?

    Hi, I am trying to use my iPhone's hotspot for my internet connection and use my airport extrem just for the wlan capabilities. Every time I connect to the AE-Wlan I lose the internet connection from my iPhone. Any suggestions? Thanks!

    When you say "wlan" are you trying to use your computer for internet sharing over wireless to other machines, and have your computer be the machine that routes the internet signal coming off the phone?
    A better configuration would be to setup tethering of internet over Bluetooth for the phone, and then the computer can use its airport card to share the internet.
    If you have an Airport Base Station, you can set it up to echo the WiFi signal being sent by the phone, and use the phone to share its internet over WiFi, using what is known as Wireless Distribution System (WDS).
    Mind you internet on the phone being shared has its limits as your account probably is capped at how much data it can use in any one month.  Computers using phone internet use a lot of data.
    If this is over your head, you may want to bring the phone, your computer, and your Airport base station to an authorized repair shop, or Apple usergroup meeting where someone can at least configure everything as needed to share with the rest of the computers in your home.

  • HT204291 Can you use Airplay when your when your Airport extreme is a bridge?

    I have ATT Uverse and I cannot get my Airport extreme to work as the main router.  So I want to know if I can airplay through the ATT router or set my Airport to a bridge and then airplay.  I am trying to use both my Macbook Pro and Ipad on the Airplay.  Or senging a the computer screen to my home tv.
    Travis

    I have a couple of extremes that bridge my ISP supplied router network, AirPlay works just fine.

  • How can I fax using my rendezvous printer, wirelessly via Airport Extreme?

    I am trying to fax a files from my G4 PowerBook, using my printer, which is setup as a rendezvous printer, via my Airport Extreme Base Station. However, I can't get the fax program to find the printer, when it scans. It only allows me to use the Internal Modem or Bluetooth. How can I send a file to the printer and then use the printer to fax?
    Thanks. Wade

    Got it - the problem is setting up and or using the modem inside the printer. The Canon website specs for that printer does say OS X compatible, but if Canon support is telling you it won't work I imagine that part of the driver that runs the dialog box and dialer isn't implemented in the Mac version. Just guessing here.
    They cost $49 but you could get this USB modem from Apple and fax directly from your Mac without printing but that would be a shame having another modem in your printer.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=MA0 34Z/A
    I guess you could ask Canon if that's the reason it won't work, and if so when they plan to update the Mac driver to use the modem. You might get an unsatisfactory answer, though!

  • Can I use a USB drive with the Airport extreme (not the new one) for Time Machine?

    I thought I heard that using USB drive for Time Machine over wifi will work with the new, tall Airport Extreme, but not with the previous model, which I have. Anybody know for sure?
    thanks.

    It is not recommended.. Apple says it doesn't work.. for some people it does for others it is unreliable.. do you really want unreliable backups.
    See http://pondini.org/TM/Airport.html

  • How do i use my own dhcp server with airport extreme

    I just bought an airport extreme and I'm trying to replace my linksys router and another access point.
    I have my own dhcp/dns server and I want to continue using it. So far, I was not able to find the way to use NAT without DHCP (like I'm doing now with my current setup).
    I want to give the device another chance before I return it to the store. Is there anything I can do?
    Thanks

    I thought that you could figure out the answer for yourself, but if you need more confirmation.....the choices/options that you need do not exist on an AirPort router.
    Cisco or Netgear might be brands to look at.  Good luck in your quest.

  • How do I use existing TM backup with upgraded Airport Extreme?

    I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it in Time Machine preferences, but it doesn't show "Oldest Backup" "Latest Backup" information and I fear it's going to try to create a new backup when it runs. How can I get it to use and add to the existing backup?

    djlstewart wrote:
    I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it in Time Machine preferences, but it doesn't show "Oldest Backup" "Latest Backup" information
    No, it won't show that until a backup is done. See #B3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    and I fear it's going to try to create a new backup when it runs. How can I get it to use and add to the existing backup?
    It should just do an incremental backup.
    |
    But, you need to know, backing-up that way is "iffy" and +*not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).

Maybe you are looking for