Can IDoc sender and receive system be the same client?

thanks.
I think one client can't assign to two logical system.so?

<i>Can IDoc sender and receive system be the same client?</i>
yes
Regards,
Prateek

Similar Messages

How can we send and receive voice in same program

Please can any one suggest me how to send and receive voice in the same program. I want both AVTransmit & AVReceive in the same program i tried it but its too difficult to do it.. Any one has got that code? And also i want my program to know if any third person is wanting to call me.. I mean how to recognise a new call. Please relpy to the following mail id.. Please i need it urgently..
[email protected]

Sir please execute this code.
printf("I need it ");
for(i=0;i<=infinity;i++)
printf("V E R Y ");
printf("U r g e n t");
Now Please Send it to me sir.Please..Does not compile!

TS2755 Why I can't send and receive MMS with Redpocket on the 4s,iOS 5.1.1?

Why I can't send and receive MMS with Redpocket on the 4s,iOS 5.1.1?

Check Settings>Messages>MMS Messaging and make sure it's set to on. Contact Redpocket and make sure your account is provisioned correctly. However, if Redpocket is not a supported carrier, it is possible that not all functions of the iPhone will work or work as expected.

I changed my carrier , i can't send and receive any sms any call, i erase my data and after the problem still..ifone 4S ios 8.3..thank u

iPhone 4S 16 Gb
iOS 8.3
I change my carrier , I can't send and receive any sms any call
I erase my data .,after the problem still again
can you help me please ?
thank u

thank u
but when I make my sim card in another phone it work normaly.and when I make another sim card in my fone the problem still and I can't send
have you another solutions ?

Multiple Message Mapping with same Idoc, Sender and Receiver

Hi,
We have one Interface sending INVOIC02 Idoc from SAP R3 4.6C to SAP R3 4.6C through XI 3.0.
On Inbound side we are using SAP standard configuring one Partner Profile with inbound INVOIC MM process code INVL.
In customizing, we have defined one invoic type for the EDI partner.
Now we have to integrate another type of inbound invoic, but in customizing it's not possible to assign more than one invoic type to the same Partner EDI.
So, we have a restriction in SAP 4.6C inbound standard. On the other hand, we can't desing two Integration Scenarios in XI 3.0 with the same idoc INVOIC02, for the same sender service and receiver service because Integration Directory doesn't allow to create two interface determination for them.
We are thinking on using header mapping in XI (receiver agreement to avoid use the same EDI partner profile for the inbound invoic, but we can't assign the same client and technical system with the same ALE Logical System in SLD for two different business systems.
Does anybody have any solution for this problem, SAP side or XI side?.
Thank you
Best regards
Luis

Hi!
In XI configuration - interface determination, you can specify more than one Inbound interface. If you identify more than one, you get a new column where you specify condition (xpath) for selecting between the different inbound interfaces.
In 4.6c, you can have more than one inbound invoic for the same EDI partner profile, if you separate between them using message function. Just add a new inbound parameter with a different message function, or copy the one you have and specify another message function, i,e. "DIFF".
Hope this helps.
Regards,
Oeystein

BPM when both sender and receiver systems are Sync. Please help!

Hi Experts,
I want to use BPM when both sender and receiver systems are Sync. For example: web service ---> RFC
I have tried the solution as given in the blog
https://weblogs.sdn.sap.com/pub/u/39730 [original link is broken] [original link is broken]
but it does not work. I am getting Time Out error.
Can somebody tell me the correct way of configuring BPM for sync-sync scenario?
Kindly give the integraion directory steps also.
Thanks
Gopal

Hi Hemant,
I have already tried the solution as given in the blog (https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken])but it does not work. When I run the scenario I am getting Time out error.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please help!
Thanks & Regards,
Gopal

Can I send and receive e-mails on my iPad through Verizon?

Can I send and receive e-mails on my Ipad (third generation) the same as I do on my iPhone 4s? Both are through Verizon. And if I can, where do I set it up at? Thanks.

Yes. Why couldn't you use the same email account?
Settings>Mail, Contacts, Calendars>Add Account>Other. Start there.

On my iPad I can only send email and messages to apple products.how can I send and receive from other devices other than Apple?

On my iPad I can only send email and messages to apple products.how can I send and receive from other devices other than Apple?

Vallakat wrote:
On my iPad I can only send email and messages to apple products.
There is a huge difference between sending email and sending messages.
Yes, I believe you when you say you can only send messages to other Apple products. The iPad is not a telephone, and therefore, it cannot text message. It can only iMessage, which means it can send and receive messages to/from other Apple products if they are on WiFi or an iMessage capable cellular network.
Email, however, is a whole different category. I don't really think you can only exchange email with other Apple products only. Make sure you have correctly identified the symptoms.

Help!!! My text application on Blackberry Torch 9800 disappeared!!! I can't send and receive texts :-(

Hi everyone,
I need your help!!!
The application to send and receive text does not appear on my phone Blackberry 9800 anymore... So, I can't send and receive texts...
I tried lots of things but the problem is still existing.
I have one error message everytime I turn on and reset the phone: "Uncaught exception: Index 14 >= 14" !!!
Any idea of what to do???
Thanks
Rachel

Hi and Welcome to the Community!!
There's pretty much no diagnosing those -- they are the equivalent of the random errors in Windows for which tracing the root cause is fruitless. Basically, these are the last out in the programming code -- some event occurred for which there is no handler in the code. The fix is a code update that handles the event...but, again, knowing what the event is is pretty much impossible. So, there are a few things to try:
Sometimes, the code simply becomes corrupt and needs to be refreshed -- just like a reboot:
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
If it won't boot up cleanly, then you may need to try Safe Mode:
KB17877 How to start a BlackBerry smartphone in safe mode
There might be an updated code set from the carrier -- check them via this portal:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
The toughest possible cause is a badly behaving app. To find it, there are a couple of options. One is to see if you can read the log file:
Go to the home screen. Hold down the "alt" key and type 'lglg'. (You will not see anything while you type).This will bring up the log file. Scroll down (probably many pages) untill you see a line that says 'uncaught execption'. Click on this line. The name of the app will be in the info. Alternative methods for bringing up the logs are in this KB:
KB05349How to enable, access, and extract the event logs on a BlackBerry smartphone
The other method is to remove apps one at a time, waiting a while in between (I usually recommend a week), until the problem ceases...thereby discovering the offending app. Still another method is to reload the BB OS cleanly, leaving some time between adding other apps onto the BB so as to be able to determine exactly which one is the cause.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't send and receive text messages

Hello,
For around 2-3 weeks I can't send and receive text messages. When I try to text somebody, the message appears as "Not delivered". On the ! there are only 2 options: Try again and Cancel. If I choose to "Try again", the results is the same: the message is not delivered.
When somebody is trying to text me, the message appears as delivered on their phone, but does not reach mine.
Please advice
Regards
Irina

Yes, I contact them and the problem was on their side. Now my problem is solved

How can i send and receive messages through CAN

Hi,
how can i send and receive messages using Vector CAN CARDXL

As mentioned in this forum post, if you have a dll, this can easily be called from LabVIEW or CVI.
I also went to the vector website and it does look like they have LabVIEW drivers available for download.
Peter Flores
Applications Engineer

Can you send and receive Fax`s with Firefox?

Can you send and receive Fax`s with Firefox? If so how do you do it?

Hi invariance,
Your printer supports eFax only, not analog faxing. To eFax, you will need to go through the registration process from the front panel of the printer. This will give you 20 faxes per month for free. If additional faxing is needed, you will need to cantact eFax and set up an account. There will be a fee for additional faxing capabilities.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

HT1355 Can you send and receive text messages in airplane mode?

Can you send and receive text messages while in airplane mode?

No. Regular SMS's require a cellular connection. However, iMessage will work in Airplane Mode, as all that requires is an Internet connection. You can turn WiFi back on while in Airplane Mode.

On Ipad 2 I can't send and receive sms!!! Why?

On Ipad 2 I can't send and receive sms!!! Why?

iPad is designed to send iMessages and not SMS.
You will need 3rd party apps to send SMS.
https://itunes.apple.com/sg/app/text-me!-free-texting-sms/id338088432?mt=8

LMDB - SLD "Source and target system have the same object server name"

Hi,
the system is a SM7.1 SP1
For some reason (Object-Server-Name changed), the job that syncs the sld and lmdb cancels...
I set the LMDB-Object-Server-Name to its original Name...
Now i've deleted the sync-config in the solman_setup and try to start a new sync, but i get the following error, when i try to configure the source-system:
'Source and target system have the same object server name: CISM318'
But the names are different: 'SM3' (LMDB) and 'CISM318' (SLD)
Any suggestions ?
best regards
Christoph
Edited by: Christoph Bastian on Aug 26, 2011 9:37 AM
Edited by: Christoph Bastian on Aug 26, 2011 11:18 AM

problem solved...
Apparently the sync needs some hours to finish a object-server-name-change...
best regards
Christoph

Can IDoc sender and receive system be the same client?

Similar Messages

Maybe you are looking for