Can iDVD 09 open and work with an iDVD project i made in 06?

I am bringing over my iMovie 06 and iDVD projects over to new mac with iDVD 09. I took out iMovie 09 and resinstalled 06HD. The iMovie 06 files now open ok, but not the iDVD 06 projects, when I try to open them with iDVD 09. Should I remove iDVD 09 and install iDVD 06.
I heard that iMovie 06 files will import ok into iDVD 09, but now assuming that the iDVD 06 projects themselves will not open in the newer program.

i uninstalled iDVD 09 and installed iDVD 06 to see if I could open the G4's old iDVD projects.
Error message says iDVD 06 will not work with this OS. What gives? Apparently iMovie HD06 will work, as far as I can tell, with just a few tests.
What CAN I DO HERE to bring over my iDVD 06 projects so I can work them on Snow Leopard?
Luckily the dvd projects are not many and not complex. But there are so many issues with all of this. I might as well have a computer that knows only Chinese characters. I got the new mac so my video work wouldnt clog up on the old G4. But this is beyond clog. This is cement, stuck at the starting gate.

Similar Messages

Can I use InDesign cs6 to open and work with PM6.5 files?

Can I use InDesign cs6 to open and work with PM6.5 files?

Lrak wrote: "It sounds like I should to that before endeavoring to transfer the manuscript?" (re-link)
It should be much easier to re-link in the Pagemaker file, as, with any luck, you can get the filenames from the Graphics Manager. After conversion to InDesign, any out-of-date linked images get their names converted to something like "image 123.jpg", and are themselves converted to an embedded low res representation of the image. Even vectored art. Pretty hard to figure them out, unless you are VERY familiar with the file, which you may be.
It may be that any cropping gets lost, too? I do prepress work, we do some set up for our customers, but most comes in pretty much ready to go, so I don't often have to did too deep into fixing such issues. On the other hand, any problem that can happen has probably crossed my desk, or it seems that way some days!

TA25361 I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addres

I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addresses.

I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
Regards,
Barry

What apple software allows me to open and work with excel files?

What Apple software allows me to open and work with Excel files?

Numbers, OpenOffice, Microsoft Office 2008 or newer, or similar products. Microsoft Office 2004 doesn't work in 10.7.
(86805)

Appleworks Drawing files can be opened and used with Eazy Draw

I bought a new IMac with Snow Leopard last week and after a lot of frustration and talking to Apple Tech Support folks, determined that the several thousand Drawing files would never be able to be used on my new Mac. How could Apple leave me high and dry with no access to my files. Several pages back on this forum someone mentioned Eazy Draw and so I went to www.eazydraw.com and payed $20 for a 9 month trial. Within 2 minutes of downloading the trial version I was using it and opening the files. It works wonderful for opening the Drawing files and working with them. I assume it works equally as well with the other areas of Appleworks.

I assume it works equally as well with the other areas of Appleworks.
No: Draw only. Pages opens Word Processing, Numbers opens Spreadsheets, Keynote opens Presentations, but nothing will open Paint or Database documents.
This set of pages may be of interest:
http://homepage.mac.com/rfwilmut/notes/aw/page1.html

Why is Numbers on Mac OS X 10.10 not opening files was working about a week ago, my iPhone numbers is still opening and working with the files?

This is what message I get when trying to open on my Mac OS X 10.10 (The file “Record of Work Nov28-Dec11-2014.numbers” couldn’t be opened), which the same file that can be opened from my IOS 8.1 iPhone.
Seriously *** gives

The most likely reason you can't open this file is that you are using an old version of Numbers. It's easy to accidentally attempt to open your document with the previous version (V2).
In rare cases, the document can be corrupt and your only recourse is to grab a backup copy.
Jerry

Can I open and work from Microsoft excel in numbers

I used to work from my HP windows laptop and now I have just bought the MAC. I want to open and continue working on my excel spreadsheets and word files. Can I use numbers and pages or do I have to go and buy the Microsoft package again?!!

If you plan on sharing documents with other users and those other users are using Office, you would be better off to buy Office for the Mac or use one of the free open source clones of Office. While Numbers & Pages will import and export Excel and Word documents, it is not a perfect process and it can create a mess if you go back and forth from iWork to Office.

I tried to uninstall firefox and to install again on linux mint.Now firefox ask every time for a profile,i never make a profile before and this is a serious problem to me.Firefox can't open and work like before the uninstall

Hi,i am running linux mint.I tried to change the firefox folder from the file system with a new firefox folder cause i had a problem with one extension(download statusbar).So,after that i have problem,firefox ask me about profile and after some tests about it from me,firefox always says"this profile its allready in use,make a new profile or rename one profile".I don't know anything about profiles,first time i see that i can make a profile it's now.

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Firewalls]] and http://kb.mozillazine.org/Firewalls
http://kb.mozillazine.org/Browser_will_not_start_up

How can I read and work with the e-mail on one IMAC (running 10.7.3) from my MacPro Power PC5 (running 10.5.8)

I would like to be able to work the e-mails on my IMAC (Lion 10.7.3) from my Mac Pro Power PC5 (running Leopard 10.5.8). I want to be able to see all the folders and have actions show up on the other computer. In other words, if I delete the e-mail I want it to disappear in real time from the other computer. The same would be for moving messages in and out of different folders. Can this be done without setting a server? If not, then what server version could I install on the MacPro that would let me do this?

That is the way IMAP should work.
Like gMail or iCloud, both of which can be setup on both Macs...
Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password

Can i run and work with OSX 10.3.9 on an external hard drive???

Hi There all,
I'm getting a 250gb External firewire HDD, i want to do this:
I want to install Tiger on my PowerBook's HDD, But everything i've got on it now with Panther is perfect, but some of the software is'nt compatible with Tiger, so i was hoping i could save everything (Panther, Software & files) on to the external HDD and when i want to use panther through the External drive and have tiger on the internal drive, so effectively have to useable OS's, the reason i need to upgrade is to use the latest FCEHD.
Any help much appreciated.
- Mike

Hi Niel,
So say the space used on my PowerBook is 55Gb, if i make a Partition on the External drive that's about 80GB, can i then, use Panther through the External drive and add to it aswell, but keep the rest of the drive for use in tiger, if that makes sense.
thanks for the quick reply
- Mike

Can FCPX import and work with Pixeomater layers the same way it does with Photoshop layers?

I meant to type in "Pixelmator" above.

choose in Pixelmators Export dialog 'Photoshop' as format:
I frequently use this feature to create with two or three 'layers' my "3D' animations of the team logos in Motion5 …

ADE can´t open ebook PDF with DRM Lifecycle Rights Management

Hello,
the ADE can´t open the pdf files with Adobe Lifecycle Rights Management.
I have download a Ebook in pdf file format with DRM at adobe lifecycle rights management.
The Reader XI can this open and work with them.
The ADE Suite can´t read this file and say some errors found on the dokument.
The adobe reader on the device (ebookreader Pocketbook 840 with newest softwareversion) do not open this file and without messages give up.
The Pocketbook Support tell to me contact adobe support.
My problem i don´t have information of the adobe softwar on the pocketbook. Only by cummunity some
The ADE 4.x and 3.x tested without solution.
Support files or dumps from device not available.
Why the ADE not support "adobe" lifecycle rights management.
And can i close this gap?
I`m only the consumer on pocketbook and onliehe.de
The Adobe licensee/customer Pocketbook and Onleihe.de do not support or don like support own customer at this issue.
Kind regards
Eddi
Sorry for my bad english

Hello,
at this situation a call with Hotline at Adobe, the ADE no listed and closed talk by system. "Many Thanks".
This can`t not be a serios Solution.
At producer from the device not fully unterstand the problem-
ADE can´t read the File and tell back its corrupt.
The device (Pocketbook 840) with Adobe Viewer stoped open file without message.
Pocketbook Support say download only products with support. PDF with DRM it´s ok, but not Adobe Lifecycle.
Thats can´t be the right way to sell products without support of own fail.and say buy other E-Books.
At wait on 11 days to see at this support instrument are only help for lightweight problems. I see to much questions without message from moderator, the consumer can´t do adobe work.
Kind regards
Eduard Kick

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)... How can I open old Freehand files on this new Mac? Can I still open and work in Freehand on this new Mac?

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
How can I open old Freehand files on this new Mac?
Can I still open and work in Freehand on this new Mac?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates

I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates. What to do?

Many thanks!!! This works and is probably the best fix for now. Thank you!!!
Date: Wed, 30 Jan 2013 10:58:01 -0800
From: [email protected]
To: [email protected]
Subject: I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates
    Re: I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates
    created by 99jon in Photoshop Elements - View the full discussion
For the D600 NEF's you have two alternatives: (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software) Windows download click here DNG Converter 7.3 Mac download click here DNG Converter 7.3 You can convert a whole folder of raw images in one click. See this quick video tutorial: You Tube click here for DNG Converter tutorial
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5034913#5034913
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5034913#5034913
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5034913#5034913. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I bought Reveal Sound's Spire Synthesizer, can't open and use the plug-in nor type in my license key? Why doesn't it work?

I validated it with the Audio Units Manager and everything was successful.
Still i can't open and use it?
Im really frustrated about this. Since it cost me more than 100€ to buy this synthesizer.
I want to use it and i thought it would be simple to do, but it seems to be the hardest thing ever..
I deeply hope someone can help me!?

As you dont say what happens when you try to open it... I'm assuming you cannot find it.... which means you might be looking in the library for it and it will not be there..
1) In Logic's Prefs turn on all the advanced tools. Now Logic will work in full 'Logic Pro' mode with all features available... and not the cutdown 'Garageband Pro' mode..
2) Create a Software Instrument Track, unchecking Open Library... If you cannot see the Open Library check box click on Details...
3) Click on the Instrument Button for that track in the channel strip
4) Look for the AU Instrument section of the popup menu that will appear..
5) Find Spire listed there.. Click on it...

Can iDVD 09 open and work with an iDVD project i made in 06?

Similar Messages

Maybe you are looking for