Can iDVD recongnize 4.7 Gb discs?

Hi,
I'm trying to burn a project to a 4.7 Gb disc but I only have the option to select 4.2 Gb and 7.7 Gb. My project is slightly too long for 4.2 Gb.
The strange thing is, it worked last night on the 4.2 Gb setting but now it won't...
Thanks,
Jamie
Intel iMac & iDVD 6.0.1   Mac OS X (10.4.6)  

JP,
You are correct that your choices are Single layer 4.2 and Double Layer 7.7 in iDVD 6 under the drop down menu "Project" then "Project Info" just beneath the Encoding catagory.
When it is set to Single Layer 4.2 and the bars DVD Capacity are "RED" you have too much.
If your project is too long for the Single Layer 4.2 then switch to a Double Layer DVD and set to that on Project Info. Any of the major brands work fine (Verbatum, TDK etc.)
LargeAl
iMac 20" 2GHz 1GB Memory Mac OS X (10.4.6)
iMac 20" 2GHz 1GB Memory   Mac OS X (10.4.6)  

Similar Messages

  • How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

    How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
    After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

    There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
    Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
    I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

  • I am using a Mac Mini. I want to change the file size  in iMovie to MPEG so I can burn the move  to  a disc. There is no "save As" that I can find . What do i do?

    I am using a mac mini. I want to change the file size in iMovie to MPEG so I can burn the movie to a disc. There is no "Save As" that I can find. What do I do?

    Stanley Fayer wrote:
    ... to MPEG so I can burn the movie to a disc. ...
    to create standard-conform DVDs = playable on any DVDplayer, there's much more to do than just converting to mpeg(2)...-
    you need a DVD-authoring app, as iDVD, Burn, Toast ........... drag any iMovie export into it, 'burn'.

  • Can I burn to mini-DVD disc

    Can I burn to mini-DVD discs on my iBook G4? I have a superdrive and I have burned the project succesfully on a regular DVD but the person that I am burning it for was told it had to be turned in on a mini-DVD.
    Not knowing if the mini would be compatiable or possibly get stuck I was afraid to try it without some comformation that it has been done by someone else before. It is a work computer.
    I tried to burn it on my sons PC and on my Mom's PC but neither worked. Neither acknowledges the mini-DVD.
    iBook G4   Mac OS X (10.4.4)  

    Hi Amber,
    as Scalz wrote, never put non-standard-sized/shaped disks into slot-in drives...!!
    besides....
    miniDVD can have two meanings:
    * these %$§*? DVDcamcorders record on miniDVD (small diameter, but mainly DVD)
    * and you are able to burn a DVDcontent (muxxed mp2 stream) onto a CD-R - that is also called miniDVD.... I was able to fit 10min onto such, but my DVDstandalone doesn't accept such disks....
    my guess, the recipient of your project tries to use his DVDcamcorder as a DVDplayer.... wow....... you get "grown up" DVDplayers for 39$.....
    many external burners accept these miniDVD-r... maybe, someone can borrow you such? and, my guess, iDVD doesn't accept them, you need to use Toast (as I did for my dvd-cd-r experiment)

  • My iDvd will not burn a disc...there is an encoding error that comes up after the title screen

    Like it says in the title...My iDvd will not burn a disc...there is an encoding error that comes up after the title screen.
    Here is the process that I have been doing.
    1. put in a blank disk and with the project already being done, i hit burn (not too hard).
    2. iDvd then starts to encode the title.
    3. After the title has been encoded, the burning stops and a message comes up saying "there was an error during encoding" and when ever I try to burn the same message keeps on coming up.
    I am running version 7.0.4
    any help would be extremely helpful

    Try using this workflow:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    Then you can concentrate on the content if you can't create a disk image of the project.
    Read these posts by Bengt Wärleby. One of them may have helpful info:
    I'm trying to burn an iMovie in iDVD...: Apple Support Communities
    I am using idvd and i keep getting the...: Apple Support Communities
    encoding video error: Apple Support Communities
    OT

  • I have completed a dvd using idvd.  It burns to disc but I want to upload it to tube Is there a way to do that?  it seens to be in project mode now.

    I have completed a dvd using idvd.   It burns to disc and plays back on both mac and pc
    I want to upload it to utube as a private link for family
    file://localhost/Users/annedutton/Documents/Be%20Still%20two.dvdproj/
    Is there a way to do it?   I looked at quicktime to try but cannot seem to get it done.
    Thank you for your help
    Anne

      iDVD is not a format that can be viewed online.  Personally I would try creating a slideshow in iPhoto with the same photos and audio as used in iDVD. Then export as a movie file with the Export button at the bottom of the slideshow window:
    Since I don't use Face Book I don't know what size to recommend.  Another option would be to get a YouTube account (free) and upload the Quicktime movie file to it.  You can make videos there private or public. 
    Follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • Can't boot iBook with install disc

    Hi All,
    I've inherited an old clamshell iBook that freezes every time I try to boot from the install disc.
    The iBook came with 0S9.2 installed and everything seemed to be working OK. I then tried to upgrade it using a retail Jaguar disc and it froze on booting up. Now it won't even load OS9 but instead gives me a blinking folder with a question mark.
    When I try to install from the Jaguar boot disc, I get the Apple logo and then it freezes right there. I tried zapping the P-Ram a few times and that didn't fix it. I tried holding Option key when loading and got to the screen where it lists boot options. I chose OS X and it after the logo comes up, it freezes.
    Have also tried re-seating and completely removing the RAM. No difference.
    When I go into verbose mode I get some kind of kernel panic error freeze and the keyboard won't let me input anything.
    I reached the open firmware screen and it says Powerbook2,1 4.1.7f4 so I think that means my firmware is fine for OS X.
    I unfortunately don't have access to an OS 9.2 disc so can't boot into that from disc. I think my 9.2 system folder needs to be re-blessed or something like that but have no way to reach it.
    Any suggestions?

    Ok, well, I believe that in order to re-bless the OS 9 system folder, you need the OS 9 CD. (I'm not an OS 9 expert, but that's what I've seen online).
    However, if you install 10.2 (or 10.3) on the computer, it should boot right into it and you don't even "need" OS 9 any more.
    I'm starting to think you have a hardware problem of some kind, and the first place to check is the RAM. OS X is more finicky than OS 9 was with RAM, so do you have another memory module you could install to check? Or perhaps another clamshell (like was suggested) to try your RAM in?
    Do you have an Apple Hardware test disk? My next suggestion would be to get one and to run the test and see what (if any) hardware is having problems.
    And one more thought: if you can boot using the 10.3 disk, try running Disk Utility and repairing your disk a couple of times. Maybe there's a problem in your hard drive.
    Rich

  • Can't read or Write to disc

    Using Windows XP I get an error (can't read or write to disc) when trying to sync my Ipod. It also says not enough room on disc at times.I was able to do this before. But it now fails. I sent the Ipod in for repair, it was stated that it needed disc repair. So I had it done. When I received it back and tried to use it I got the same errors. I was all ready to call the repair company and complain, but decided to try it on my computer using Vista. Everything works fine there. But now on the one using Xp. Anyone have any ideas on what might be the problem?

    Hi, did you ever have this issue resolved? I am now having the same problem. I was told that they hadn't a clue to what was going on and to make an appt to bring my laptop, external hard drive AND my iPhone in order to see what the problem is. I'd really like to know what you found out. I'm a home-school teacher and my phone is everything!
    Thank you

  • Can I use my iMac Install Disc on Macbook Pro?

    Hi, all.  I was given a friend's old Macbook Pro and I'd like to put Boot Camp on it, but the Boot Camp instructions say I need an OSX Leopard install disc to do it.  Naturally, I just recently purged my own software binder and threw away all of my OSX discs except the one that came with iMac I recently purchased.  "Why would I need them any more?" said I.  Doh.
    I have no idea what cat Apple is up to now, but the Macbook is running 10.5.8 and the install disc from my iMac is 10.6.7.  My questions:
    1) Can I use my iMac install disc on my Macbook Pro, which is about 3-4 years old?
    2) Does OS 10.6.7 qualify as Leopard?  If not, will it work for what I'm trying to do?
    3) Do I need to update the Macbook OS to 10.6.7 to be able to use that disc for the Boot Camp install?
    Any information or advice would be appreciated.  Thanks!

    The only thing I'd add to this is that at one point in time you could go to an Apple store and purchase Lion on a USB stick.
    If your MBP was compatible and you could find one of those you could boot to it, install from it then setup bootcamp.
    Also if you are thinking bootcamp, also consider VMWare Fusion or Parallels which allow you to run Windows while still in OS X.

  • Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I inste

    Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I instead just keep everything on my ipod and then if I have to get a new computer or something just download all my songs from the ipod to my new computer's itunes? Will that work? Will I still be able to keep all my songs that way?

    I'm going to assume the consolidating files does not work due to hard drive space limitations.
    Since you're moving to Windows 7, have you tried using the Windows files and settings transfer utility?  That will move everything for you to the same location on the new computer, it also allows some control over what actually gets moved.
    Alternatively, if you know the location of all of the media, it can be manually moved by copying it from the old computer to the new computer in the same location.
    Also, using the Apple article on moving the library, take a slight twist on what it says.  Move the iTunes library to the external drive, update the settings in iTunes to reflect the library being on the external drive, then consolodate it.
    The options are endless for moving the library... it simply takes a little effort to make it happen and possibly a twist on existing "standard" methods depending on your unique situation.

  • Is there any way that I can get back my iPhoto?  After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

    Is there any way that I can get back my iPhoto?  After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

    As Niel pointed out, yes.  The disk probably will look like the MBP disk (4) in this screenshot;
    OT

  • Can you use a start up disc on an iMac without formatting the hard drive?

    Can you use a start up disc on an iMac without formatting the hard drive?

    Yes, because the startup disk is read from the boot rom, not the Hard Disk.

  • Can I install Mac OS X 10.5 on a Powerbook G4 already running Mac OS X 10.6? I lost my disc of 10.6 and can only find my 10.5 disc as I'm selling my MacBook and wiping the hard drive for a complete reset.

    Can I install Mac OS X 10.5 on a Powerbook G4 already running Mac OS X 10.6? I lost my disc of 10.6 and can only find my 10.5 disc as I'm selling my MacBook, and wiping the hard drive for a complete reset.

    A PowerBook G4 can't run Snow Leopard OS 10.6, however, it can run Leopard OS 10.5. But you must use a retail (black) Leopard install DVD.
    What does the selling of your MacBook have to do with installing Leopard on your PowerBook?
     Cheers, Tom

  • Lost original macbook disc. Can I Install a retail Leopard disc on a MB.

    I have a macbook a friend gave me but he did not have the install disc for it. He took out the hard drive when he gave me the MB, so I am trying to reinstall the OS. I put in the leopard install disc and it boots to install great but stops one step before with a mouse diagram like its not connected. As soon as I connect an external mouse and keyboard all is fine. I am wondering if this is because I dont have the Macbook install disc? Can I Install a retail Leopard disc on a MB. Thank you so much for any help you all can give me.
    Thanks again,
    J

    yes it is a retail version. Came in the black holographic box with the big X. There is no hard drive in the computer. I am trying to test the machine by booting up from the install disc. I know it sounds crazy but i have not received my new drive yet. LOL now if I can convince someone with a macbook to remove the hard drive and try booting up with a retail version to get the same result. . Any takers?

  • Help! How can I take out the mini-disc stuck in mac?

    Help! How can I take out the mini-disc stuck in mac?
    I insert it into the mac, but the OS cannot load the disc and the disc cannot be ejected even i pressed the "eject" button.

    This happened to a family members macbookpro. A mini-cd inserted, couldn't be mounted or ejected by the drive.
    I cut a rectangle from a cereal box about two inches wide and 6 inches long. Abour an inch and half from one end in the middle I cut a notch and bent it down a little.
    I................I
    I................I
    I....I__I....I
    I................I
    I................I
    I................I
    I................I
    I................I
    I................I
    I................I
    I................I
    I................I
    I________I
    I then inserted it slowly into the drive notch down and slowly pulled out. I did this few times and caught the mimi-cd and removed it. The drive has worked flawlessly for several years
    A few days after this happened I was in BestBuy and an Apple rep was there displaying new Apple products. I asked him about it and he said they have a tool that ***** it out.

Maybe you are looking for