Can Illustrator CS6 read CS4 files? [was: CS6]

i want to purchase the CS6 illustration. my question is, "will the CS6 be able to read CS4 files?"

yes, newer versions can open older files.

Similar Messages

  • Can Elements 7 read CS4 file formats  ?

    If CS4 has been used to capture HD and develop in-progress sequences (with basic video and audio transitions) and thus Premiere Pro project files *.prproj can they be imported/read by Elements 7 for further work (e.g. on another computer by someone else)?
    For basic video editing tasks, if CS4 formats can be imported/read in Elements 7 are there any specific aspects that may get lost or cause issues (and what are these)?
    And can I assume that the reverse, importing/reading Elements 7 file formats in CS4 is possible and fully transferable.
    Windows XP SP3
    2GB RAM

    Unfortunately, my tests between PrP and PrE were for earlier version:
    PrP2 & PrE4.
    What I found was that PrP2 could Open PrE4 Projects, with only a few glitches. PrE4 yielded an error, "This Project was Done in PrP2. Use That Program to Open This File."
    These were simple Projects, with only a few Titles, Transitions and very limited Effects. There were no Themes, etc. used.
    In PrP2, there were a few things that did not translate from PrE4. One Tilte had animation and text on a Path. These did not come in.
    The PrP2 Project was even less involved, but nothing would Import.
    As Steve says, the Assets will translate well between the two NLE's, but editing work will possibly be limited in one direction, but nothing will Import in the other.
    Good luck,
    Hunt

  • When double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

    when double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

    Unless you have attempted to downgrade to an older version of iTunes this is likely to be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
    tt2

  • I get a message that "the file itunes library.it can't be read because it was created by a newer version of itunes.

    My itunes library won't come on when I connect to my computer.  It comes up with the following message:
    The file "itunes library.it" can not be read because it was created by a newer version of itunes.
    Help

    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • Letter-Spacing is different if I open my file at another Mac of us (Value is at both mac 0, but the text is longor), and if I cklick into the text-box, Illustrator says that the file was made in an other Version of Illustrator. We have on all macs the sam

    Letter-Spacing is different if I open my file at another Mac of us (Value is at both mac 0, but the text is longor), and if I cklick into the text-box, Illustrator says that the file was made in an other Version of Illustrator. We have on all macs the same system, os 10.8.3, cs6 and UTC4. And of course we`re using exactly the same font....

    Packpool,
    I believe the first thing to do is to update to 16.0.5.
    Adobe - Illustrator : For Macintosh

  • HT6012 Can I take an older imovie made back in 2009 found on an old external drive and get it to iCloud?  When I try to open it, it says can't open because the file was iMovie 9.0.9.  I just want to get it on Theater so I can watch on Apple TV and have in

    Can I take an older imovie made back in 2009 found on an old external drive and get it to iCloud?  When I try to open it, it says can't open because the file was iMovie 9.0.9.  I just want to get it on Theater so I can watch on Apple TV and have in iCloud

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • Why am i seeing "i tunes library can't be read because it was created by a newer version

    I have been trying everything to get my itunes to work again. I keep getting the message "itunes library.itl can't be read because it was created by a newer version of itunes.    I have tried uninstalling and reinstalling. I can't get anything to work.

    This would suggest that you have installed an older version of iTunes. Either install the most recent version or restore an older version of your library file from the Previous iTunes Libraries folder. Copy the dated file into the main iTunes folder. Rename the current iTunes Library.itl file as iTunes Library (broken).itl, then renamed the restored file as iTunes Library.itl
    tt2

  • Library can't be read because it was created by a newer version...after upd

    Help please!!! I recently got the usual update available message so I updated the itune version on my computer. SInce then each time I plug my iPod in and try to do anything I get a message that says the file "iTunes Library.it!" can't be read because it was created by a newer version of iTune.... surely if yo update you simply carry over the library???? It seems that I will need to create a library all over again. Has anyone got any ideas. I tried deleting the whole program and reinstalling the original software that came with the iPod. But to no avail. Any help would be great.
    cheers

    SInce then each time I plug my iPod in and try to do anything I get a message that says the file "iTunes Library.it!" can't be read because it was created by a newer version of iTune.... surely if yo update you simply carry over the library????
    i've seen that happen before. (actually, more commonly on itunes 6.0.x versions than 7.0.x versions.)
    it can sometimes happen if the upgrade doesn't go through properly. (you can end up with the later version of the library file, but the earlier version of the program files are still in place.)
    so let's try the itunes 7 update again. download and save a copy of the itunes 7.0.1.8 installer to your hard drive. (we'll run the install from there rather than on line. switch off antivirus and antivirus applications prior to the install.
    iTunes 7.0.1.8 Installer
    does your itunes 7.0.x install appear to go through properly? if so, does it launch properly this time?

  • Itunes wont open i get "itunes libary.itl" can not be read because it was created by a newer version of itunes. help

    itunes wont open i get "itunes libary.itl" can not be read because it was created by a newer version of itunes. tried deleting itunes an re installing. help

    The same thing happened to me no one has replied to my comment either!! I need help!!

  • My computer will not let me open itunes at all. It tells me that the itunes library can not be read because it was created by a newer version of itunes. What to do? Please Help Me.

    My Computer will not let me open itunes at all. It tells me that the itunes libary can not be read because it was created by a newer version.

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • Itunes will not launch, it shows  message of "itunes library .itl" can not be read because it was created by a newer version of itunes. I tried opene it in save mode but I had the same problem.

    Itunes will not launch, it shows  message of "itunes library .itl" can not be read because it was created by a newer version of itunes. I tried opene it in save mode but I had the same problem.

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • Where is button to accept end user agreement so I can download or read online file.  mac osx reader XI

    where is button to accept end user agreement so I can download or read online file.  mac osx reader XI
    every time i click  on a file to downloac
    i get a reader message Before viewing PDF ... you must launch adobe reader and then accept the End User License Agreement. Ive searched  every part of the menu for this and cant fine it

    Ok, so the Reader app works. Fine, but why did you say ",the reader won't open any more", that led us a confusing direction.
    Ok, the problem is most likely caused because you downloaded Acrobat Pro, which takes over from Reader, then got rid of it. You now have part of Acrobat in Safari, not part of Adobe Reader.
    There are two things to try to fix this. The first and easiest is to download and install Adobe Reader again. That should puts its stuff back in Safari with a bit of luck.
    Important note for others following this thread. Downloading Adobe Reader is not going to help you if you have not understood and followed the instructions to "launch" Adobe Reader (or Adobe Acrobat). Make sure you understand what "launch" means before downloading anything again.

  • Can't Open CC project file in CS6

    I edited my videos in Adobe Premiere Pro CC, but I can't open the CC project file in Adobe Premiere Pro CS6. The message says 'The project appears to be damaged, it cannot be opened.' Is there a way to convert the project so that it works for CS6?

    So how did you open it?
    I downloaded your file: "from-CC.prproj" (link in post 10).
    I duplicated the Project and renamed it: "from-CC_Version23_CS5".
    I opened the file in Dreamweaver, and changed '26' to '23', then saved:
    I opened the altered file "from-CC_Version23_CS5" in CS5.0.3.
    On opening in CS5.0.3, I got this error message:
    I clicked "OK".
    The Project opens asking for location of "Video-Frame-White-Test.jpg".
    I clicked "Offline".
    The Project opened, and Sequence Properties are [email protected]:
    I replaced your .jpg with a stock clip:
    I saved the file in CS5.0.3, then exited.
    Then I opened and renamed the saved file in CS6.0.5:
    note:
    I was unable to alter the 'Version Number" to from '26' to '25'
    and open the Project directly into CS6.0.5:

  • Can't import uncompressed AVI files in CS6 Premiere Pro

    Hi!
    I'm using Adobe CS6 Premiere Pro on Windows 7 Pro (64bit) but can't import uncompressed AVI files.
    I get the error that the file has no valid fomat or is damaged, but I can watch the avi videos without a
    problem with the media player.
    I also have CS4 installed, with CS4 I can import this files.
    What can I do to solve this?

    AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Can't open D3200 Raw files in CS6!

    I just bought a nikon D3200 and cannot open the raw files in CS6. I downloaded adobe camera raw 7.1 in case - no help! Very frustrated! What to do?

    From Photoshop go Help > About plugin > Camera RAW and see what the version is.
    the D3200 needs 7.1
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5391
    Which you can install from Help > Updates

Maybe you are looking for

  • Not able to view certificate in QC55

    Hi All, I am trying to do a GR from an inbound delivery. The storage location is HU managed. After doing the GR i go to QC55 to view the certificate i dont see it. The certificate is put "YES" in inbound delivery. Material master is maintained with c

  • Remediation process in SRM

    Hi all, Can anyone explain me how the remediation process takes place in Sun Role Manager. I revoked some accounts during certification.Im able to see these revoked account details in the "remediation tracking tab". But it is remaining in 0% always.

  • Expression for the current hour

    I'm trying to assign a lead based on the current time and a user's hourly shift availability - is this doable? I was thinking to use custom fields that track the user's hourly shift in a 24 hour day (e.g. shift start and end fields: for example 8am t

  • Can WLS 6.1 creat Web Services for JB insted of EJB?

    I mean can the wsgen utility generate Proxies and other needed pieces and pack them proprietarily if I would substitute the EJB by JB ?

  • Request for multi selection in XTree component

    Dear Donald, i need a small help in XTree component.Currently its supporting only single selection but i need to do multiple selection in that.Can you please enhance that for multi selection.This would be of great help to me. Appreciate your help...