Can iMac with o/s Version 10.7.3 use USB 3.0

Can iMac with o/s Version 10.7.3 use USB 3.0 flash drives?

den.thed wrote:
Apple does not support USB 3
Really? I guess you missed the new lineup. FW's gone, but USB 3 is in.   

Similar Messages

  • HT201364 I have a 2013 iMac, with OS X version 10.8.5.  Have been trying to download OS X Mavericks without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc".  Please help; TQ

    I have a 2013 iMac, with OS X version 10.8.5.  Have been trying to download OS X version 10.9 (OS X Mavericks) without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc".  Please help; TQ

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HT5037 when I click on iPhoto(9.5.1)  i get "To open your library with this version of iPhoto, it first needs to be prepared." but i downloaded the up-grader, used it and it tells me the library can open with the current version... what should i do now?

    When I click on iPhoto(9.5.1)  i get "To open your library with this version of iPhoto, it first needs to be prepared." but i downloaded the up-grader, used it and it tells me the library can open with the current version... Then when I click on the iphoto again i get the same message "To open your library with this version of iPhoto, it first needs to be prepared."'
    What should I do?

    The upgraded is only necessary for libraries created with iPhoto '07 or eearlier.  Just double click the library to open it in iPhoto, and let it upgrade, if it has been created by a newr version.

  • Some component with an unsupported version is trying to use NI Spy

    This problem is intermittent. In GPIB Configuration, Network settings, when I select the IP address of GPIB ENET/100, I get this NI Spy message: Some component with an unsupported version is trying to use NI Spy. Please contact National Instruments for an update. Do I need to update the firmware of GPIB/ENET100? The current version is B.9.

    Hello,
    Try uninstalling 488.2 driver, then uninstall MAX and then reinstall the 2.1 version for 488.2 from CurrentGPIB driver versions. Also make sure you are the administrator while you uninstall and reinstall.
    I have not seen this problem happen before so I hope uninstalling and reinstalling helps solve this problem.
    Please feel free to email me back incase you have further questions.
    Good luck and have a great day!
    Koninika
    National Instruments

  • I can use my Ipad and I husband Ipod 5gen with the new version 11 but cannot use MY own Ipod 4th generation.  What can I do.  I try everything written in the help section.

    I upgrade to I Tunes version  11.0 (163) today and since this «upgrade» when I connected my I Pod (4th generation) I tunes open, the screen sayind conected on my I pod is on but my I pod will not synchronysed neither will it appear on the bar or the left column.
    My I Pod work very well, I do not want to change it yet. It was working very well with the previous version of Itunes.
    What can I do?  I try everything written in the help/ support section. (reinitialisation, etc..)

      Model Name:          MacBook
      Model Identifier:          MacBook6,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.26 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MB61.00C8.B00
      SMC Version (system):          1.51f53
      Serial Number (system):
      Hardware UUID:          33F11070-FB1E-5288-9710-272425BC5B69
      Sudden Motion Sensor:
      State:          Enabled
      Is that what you needed?

  • HOW CAN I CONNECT IPHONE 4 INTERNET TO MY PC USING USB CABLE

    HOW CAN I CONNECT MY IPHONE 4 INTERNET CONNECTION TO MY PC USING USB CABLE AND I HAVE DONE TETHERING IN MY PHONE AND ALSO DOWNLOADED ITUNES USING FLASH DRIVE AS I HAVE NO INTERNET CONNECTION IN MY PC AND IN MY PC THERE IS NO DETECTION OF ANY APPLE DEVICE. PLZ HELP ME

    First, knock off the all caps typing. It is considered shouting, rude, and is just plain hard to read.
    Since you use the term "PC," are you using an Apple computer or something that is Windows based?
    Barry

  • I'm using an older iMac with OS10.4.11, and I'm using Firefox 3.6.17. The newest version of Firefox doesn't work with my computer. I've tried to find a download for Firefox 3.6.22 but can't find it. What can I do, I can't afford to upgrade my computer?

    Help! I would like to update to the highest version I can with my older system - Mac OS 10.4.11. Can you help me?

    As you have a Power Mac you also have a alternative option to consider which is a third-party build from http://tenfourfox.blogspot.com/2011/08/601-now-available.html

  • I have a 27 in. iMac with the latest version of Snow Leopard. When Lion comes out, will it be software I purchase and download online? I am trying to prepare for cost and don't have a point of reference, having been a Windows guy until last summer.

    I want to know what to expect in terms of moving from one OS to another. Having been a Windows guy until last summer, my only experience is going from one version of Windows to another, which is usually a fairly costly purchase. I will want to go to Lion, but as a retired teacher, my income is fixed. I am not looking for a specific price, I am sure that is unknown, but I would just like to know help Apple does these things so I won't be sadly surprised.

    Historically Apple has sold OS X upgrades via DVD media however with the advent of the Mac Apple Store that throws another possibility into the mix. That's about as much as I can say as these forums don't allow us to speculate about future products. As for the cost historically Apple has priced OS X upgrades between $29-$129, the last upgrade (Snow Leopard) was only $29 but that was an exception. Again we cannot speculate on these forums about that. The good news is that Apple is unlike Microsoft which makes OS upgrades expensive and complicated. The choice with OS X is do you want a server version (most users don't need one) or a single computer license. The users that buy server versions tend to have a number of Macs they manage from a server, most consumers don't have this issue.
    Keep reading the news, as you know Apple has announced a Summer release for Lion.
    Upgrades on OS X are usually very simple. I've upgraded from Tiger to Leopard to Snow Leopard and each transition has been very easy. With any major OS upgrade there are some basic rules to follow, for example always, always, always backup prior to any update. When Lion is released to the general public post again for what to do to prepare or even do a Google search on "How to prepare for OS X upgrade" and you will find a number of articles that will provide some suggestions and valuable insight. You can also re-post here and users will be happy to assist.

  • Can iMac with Airport card be used to supply Wi-Fi for Kindle?

    I bought a Kindle for my mother, but got the Wi-Fi only Kindle. I now find out she doesn't have Wi-Fi set up. She has DSL wired to her iMac. The iMac has an Airport card which I believe can act as a base station to share internet with other Macs. But will it also allow her to use the Kindle with her internet? She lives in another state and I would have to help her set it up over iChat Desktop Sharing probably.

    apparently the kindle will not connect to "ad hoc" or "peer to peer" networks, which is what the airport card creates.
    the better news for you is that you can download books from amazon directly to your computer and manage them there too. from amazon's web page download the "kindle for mac" program: www.amazon.com/gp/kindle/mac
    then you can start downloading books to that application directly from their site. they will appear in your documents folder and can be copied into the documents folder on your kindle, after which they will appear on the device.

  • Can I download the trial version of photoshop and use it as the full version with my serial number?

    I have photoshop 6.0 on my current computer, I got in in college 4 years ago and the disc subsequently came to a tragic end after a collision with my dogs teeth T_T I still have the serial number though.  My problem is I've just bought a new computer and I was told that to transfer photoshop to my new computer I had to deactivate it on my old computer and then download the trial version using the original serial number.  Will this work?

    Is this Photoshop Elements 6 or Photoshop 6?  Either way this would not be the current version so it will be difficult to obtain the installation files as we only offer replacement media for the current version.  If you have your serial number though you will qualify for upgrade pricing.  For additional details please review http://www.adobe.com/products/photoshop-elements.html.

  • Can Station Gloabals from different versions of TestStand be used with TestStand 2010?

    I have an older version of TS - ver. 4.01.  I just renewed my subscription and have 2010 now.  Can StationGlobals from one version be copied directly into the cfg directory of a different version?  It appears to work, but I want to make sure there are no underlying problems.

    Hi,
    Seems like you have answered your own question. When TestStand closes it will update the StationGlobals.ini file so if you were going to have any problems you probably would have seen it then.
    Regards
    Ray Farmer

  • I may have downloaded a virus or malware by accident. How do I check to make sure? I have a iMac with OS X version 10.9.4

    I may have downloaded a virus/malware by mistake. How do I check to see?

    Did you open an attachment in the email?
    I don't understand why Rudegar is talking about this happening in iOS????
    ...software can't be added from a mail or website
    But if an attachment was opened in that email... And there are drive-bys from sites, if Java is enabled in the browser.

  • I am trying to uninstall QuickTime so I can reinstall with the latest version. It won't uninstall, says fatal error, any ideas welcome, thanks

    I am unable to update to iTunes because evry time it says there is no Quck Time installed. but Quick Time is there. I am following the advice from Apple Support to uninstall iTunes first.... this was successful. The second one was Quick Time but it refuses to uninstall and repeatedly says there is a fatal error during installation. I believe it is really there at 70.12 Mb but am now at a loss. Any help gratefully received. SBM

    SBM, you might want to try Microsoft Cleanup Utility to remove the old Quicktime msi file
    http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html
    Apple has changed around their support forum which has made it difficult for Windows user's to navigate and get a prompt response, I see your post is 4 days old...

  • How come I could print coupons with previous versions of firefox such as versions 2 and 3 and I can't with the current version? It is frustrating because every time I want to print a coupon I to use internet explorer.

    none.

    Are you sure that Firefox gets the plugins from the ~/.mozilla/plugins directory and not from another location.
    Did you try to place the symlink in /usr/lib/mozilla/plugins ?
    See [[Troubleshooting plugins]] on how to see the path of all plugins.

  • I am going to update my PC to windows 7 (from XP), how can i backup my current version of firefox and use it on the updated OS?

    since support for XP is done and continued use puts my PC at risk, I am going to install Windows 7. I want to know how i can do a full back up of my current version of Firefox and then run it on the updated OS; i have lots of add-ons that I don't want to lose and then have to go through the whole process of reinstalling and customizing.
    (currently running Firefox v28.0)

    It would be best to be cautious with copying a full profile folder from Windows XP to Windows 7 as the file structure is completely different.
    *C:\Documents and Settings\<user>\Application Data\Mozilla\Firefox\Profiles\<profile>\
    *C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Maybe you are looking for