Can image be shrunk to fit on CVS Monitor

I have a Point Gray Scorpion camera with a resolution of 1600x1200 pixels. Is there a way to shrink the image so the entire image is shown on the CVS monitor without being cropped. I am using VBAI 2.0.2

The VGA output on the CVS has a maximum resolution of 1280x1024. The only way to see the full field of view at this capture resolution is to add a Vision Assistant step that resamples the image to 1280x1024 (or smaller). If you resample before making measurements, you will be able to see the default overlays on the monitor, but lose some of the advantage of the high resolution. If you resample after your measurements, then you lose the display of the default overlays, but keep the full measurement accuracy of the high 1600x1200 image. You can always add custom overlays which will show up after resampling.
Regards,
Brent

Similar Messages

  • Can an image resize automatically to fit into a template?

    Many (weaker) programs allow you to drag an image into a template and have it resize to fit into a specific area.  Can this be done in CS6?  For instance .... if you designed a 4x6 Christmas card template and it had a (place holder?) for a 2x2 photograph, and you dragged an image into this 2x2 area, can it resize automatically to "fill" just that 2x2 area?  This would result in some cropping of just the longest dimension, if the image inserted wasn't a square.

    It can be done with Photoshop Scripting.   Note when the inage has a diffenebt aspect ratio or different shape then the template the images is sized to fit and fill the template open and any excess is masked off.
    I have a free download you can use.  In Photoshop version  CS2 through CS5 Below CS2 some required features are missing and there are bugs in CS6 scripting.
    Photo Collage Toolkit 
    Photoshop scripting is powerful and I believe this package demonstrates this. The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
    There are ten scripts in this package they provide the following functions:
    TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
    CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
    LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
    InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
    ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
    ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
    PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
    BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
    BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
    PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
    Documentation and Examples
    Download

  • Image processor - rotate to fit?

    Anyone know what happened to the Rotate to Fit feature in bridge/tools/photoshop/image processor? I have to make several web photo galleries and this most important feature seems to be missing with CS4.

    It is still there as it was in the lost couple of version as I try to
    recall. Open an image, choose File/Automate/Fit Image and you can fill in
    the constrain proportions.
    You can record this in an action to run a batch.
    However, it is very, very easy to select landscape and portrait images in
    Bridge using the filter panel and inhere choose orientation. Click on
    landscape and all landscape orientated images show, select them and run a
    batch using the menu tools/Photoshop/batch.
    Photoshop CS4 doesn't have that option so I have to go through all of my
    images, select all the landscape images, put in 600 wide x 400 tall, and run
    the script. Then gotta Go Back... select all of the Portrait images.. and run
    the script again but this time for 600 tall x 400 wide. Such a pain - gotta be
    a better way just haven't found it yet! help!

  • How can edit a photo to fit my wallpaper?

    Can't resize a photo in my stream to fit as a wallpaper since the new upgrade. Any ideas?

    Thks leonieDF for the help but the issue is that I can't use a whole photo shrunk to fit the iPhone as I use to. Now I'm only getting a cropped version of it to use as a wallpaper.
    These options seem to have been discontinued in IOS 7.
    Try to view the photo in the Photos.app, scaled exactly as you like it in "Edit" mode. Then take a screenshot of the current view (Press Home button and Power button at the same time). This will save a version that exactly fits the screen to the Camera Roll. Use that screenshot as as wallpaper.

  • How to best arc image without distortion to fit curved cup template?

    I have tried searching forum for this and I know it has been discussed before but not really finding what I need to do correctly.  I have attached the layered image (reducing opacity so you can both template and image). The vendor provided me a flat template, not a path, to do my artwork. As you can see I need to arc the image without distorting to fit a cup template. I am more comfortable in photoshop but I can export to AI if necessary to complete which appears what I need to do via envelope distort from what I keep seeing. However, the template provided is not a path. I tried to trace template shape manually with pen tool and use envelope distort to arc my image to conform but it looked very distorted and no even close to what I was trying to achieve. I tried to do tradition arc warp in photoshop but it still seems to distort proportions. Steps on how best to do this would be much appreciated! I know there must be a easier/more efficient way to achieve this.

    I would not trace the template and will simply use it as a visual reference for deforming (conforming) the image to it. You can make the template image transparent to certain degree using the Transparency panel so you can see through it then move its layer on top of all other layers and lock it. Scale and position your image in such way that at least two of its corners fit two corners of the template for example the two top corners and then its bottom edge is on the same level as the template.Then select the image to be deformed and in the control panel at the top of your screen click the Embed button which allows you to deform the image (edit: just noticed you wrote it is already embedded, so skip this).
    Choose Object > Envelope Distort > Make it with a Mesh. and chose 1 for rows and columns. Make sure the Smart Guides are on (View > Smart Guides). With the Selection tool (white arrow) Shift click or drag a selection box to select the two points of one of the vertical sides of your image. Pick the Sheer Tool and first just click on the selected top corner point to set the reference point of the sheer then click and drag the corresponding bottom point to match it to the corresponding point of your template. You may hold Shift while dragging to constrain although the Smart Guides will do that by snapping to edge of the envelope if your mouse is close to it. Repeat this for the other side of image. To make the image curved, pick the Selection tool (white arrow) click a corner point which will display its handles, pick a handle that is on a horizontal side of the image and pull it up to deform the shape referring to the template. You may do this first roughly with all horizontal handles and then you can drag guides from the ruler when a handle is selected to snap a guide to it and use it to put the corresponding handle on the opposite side on the same level.
    Once you have deformed the image to conform to the template, you can fine tune the distribution of the vertical deformation with the vertical handles of the corner points. You can grab a handle and drag it along the vertical paths of the envelope (the Smart guides will snap to it). Drag the vertical handles on one each side lower until you like the distribution of the deformation.
    Try to follow my instructions and I'll clarify if you are stuck.

  • How can  I checkout an existing file from CVS without going through the wiz

    How can I checkout an existing file from CVS, that is not already in my local jdev, without going through the wizard and checkingout everything?

    You can't. AI doesn't produce .PLT files.

  • Can I use split screens on and extra monitor I have. I can get mirror image on both screens, but not a split screen. The monitor is 1600 x 900.

    Can I use split screens on an extra monitor I have? I can get a mirror image on both screens, but not a split screen. The monitor is 1600 x 900 AOC 20inch monitor. Hope I haven't wasted my money buying this £69 monitor. My 13" Macbook Pro is a little small for my ageing eyes. Thanks

    In the display settings on your computer uncheck "mirrored". This will put the displays in "extended" mode. In extended mode you can set the external display to its native resolution as well as drag windows from your computer to the external monitor. I assume that is what you mean when you say "split screen".

  • Can you have a PDF fit on the viewer's screen automatically when exporting from InDesign CS4?

    Can you have a PDF fit on the viewer's screen automatically when exporting from InDesign CS4?

    If you were to upgrade to InDesign CS5 or CS5.5 and if you exported as Adobe PDF (Interactive), you could set the View settings for Page Layout and Zoom.
    While, as Jongware points out, its possible for individual users to override that option (Preferences > Page Display > Default Layout and Zoom), the number who will actually do that is actually very tiny.

  • Why does images in preview are in a different position and resolution than in design view? In design view I have to place the images of screen to fit in preview.

    Why does images in preview are in a different position and resolution than in design view? In design view I have to place the images of screen to fit in preview.

    Already changed in different settings. Here is a screenshot when set to "Original Size".

  • Solaris 10 install problem (requested image to big to fit into memory)

    I have just downloaded the iso images and burned to disk. When I go to install I get the message (Requested image to big to fit into memory Error 28) I have 1.5GB so I don't understand the problem. Thanks in advance
    It took a long time for me to figure out, but the answer is disable in BIOS memory hole at 15M to 16M. This solved the install problem with Open Solaris and quite a few more such as not being able to install Linux Zenwalk 5.0 or openSUSE 10.3. Their are others also problems I have had with Linux or UNIX that this took care of. JGZ
    Edited by: jgz on Mar 8, 2008 9:13 PM

    Hi,
    I had been able to solve the Error 28 issue that in my case was really related to a corrupted boot image:
    1. I went in the path /a/platform/i86pc
    2. rm boot_archive.
    3. sync
    4. reboot
    At this point the OS will notice the absence of the boot_image and it will regenerate it.
    At the time of this operation the CD with solaris 10 was inserted in the CDROM.
    When the system restarted it was able to load the OS properly.
    Please use these information at your own risk. I do not accept any liablity.
    Cheers

  • Can't resize column to fit text

    Can't resize column to fit text in numbers.  option is "grayed-out" no matter what I do

    It is either a glitch or a rather unfun new thing. No one knows for sure. You do have a bit more control if you go into your photos app, find your photo and tap on the little box with the arrow poking out of it. That allows you to send it to be wallpaper. You can do some scaling, although not as much as you used to.
    Finding work arounds is about all you can do until it's fixed.

  • Picture can not be resized to fit the screen, so i can only see half of my face when use it as wallpaper!! Suckss!!

    picture can not be resized to fit the screen, so i can only see half of my face when use it as wallpaper!!  How can I change it？？

    There's a bug with the wallpaper. One thing that helps a bit, go to the photos app, find your pic, 'send' it to be wallpaper. You have a bit more control although not all the function you're used to.
    No idea when or if Apple will fix it.

  • Is there a way for rollover hotspots to adjust on an image that scales to fit browser?

    Hi,
    This is my website currently: paddyohara.co.uk
    The main rollover image on my homepage is currently a fixed size, but when I set the image to expand to fit the browser, the rollover hotspots moved out of position on large screen resolutions. Is there any way to get the rollover hotspots to size up relative to the image sizing up?
    I hope this makes sense, any help much appreciated
    Paddy

    You could try something like this (I have not because I so rarely use hotspots) -
    http://stackoverflow.com/questions/19671168/how-to-adjust-the-top-left-width-height-based- on-the-ratio-of-the-resized-image

  • Can images be used as selections in a combo box in Acrobat 9 Pro?

    Can images be used as selections in a combo box in Acrobat 9 Pro? I only see options for text choices when I look at the combo box properties. Basically, I want to click the drop-down and see images (small logos) from which to choose as opposed to text choices.
    I'm grateful for any thoughts on this.

    Have a look at the PO sample that ships with Designer. It shows the provinces or states based on the country that you choose. Look in the Designer install folder under EN/Samples/Forms/Purchase Order/Dynamic Interactive

  • HT5012 Why can't I scale to fit my pics for wallpaper since upgrading to iOS 7?

    Why can't I scale to fit my pics for wallpaper since upgrading to iOS 7?

    I have iPhone 5.

Maybe you are looking for

  • ITunes won't open from dock or apps

    When I click on the iTunes icon on the dock, it bounces once (sometimes twice), then stops bouncing and nothing opens. I tried opening from the application folder and nothing. I tried downloading the most recent version, but then I can't open the .dm

  • What happened to Split View?

    I wanted to watch the Macword Keynote today to see what features Steve put out there that we don't currently have. One is "Split View" email: This allows us to see the email message in the current window with the email list at the top, and the mail m

  • Can't synch iPod Classic 80Gb

    Help, please. Have been using iPod without problems for 6 months. Library is on external drive (USB). Normally i have the drive plugged in at the back of the laptop and plug in the iPod on the side port. Today i had the drive in the side port while i

  • ITUNES DOES NOT PLAY ALL MUSIC FILES AFTER DATA RECOVERY

    My external Iomega Firewire 160gig HD, all of a sudden, changed the drive letter from H to F with unknown format. I recovered music files ( Using Stellar Phoenix FAT)and files/folders are in iTunes but only 20-30 play (out of over 6,000) I can play C

  • Best solution for multiple host tradingpartners

    Hi guru's, I have the following situation: Customer currently has one department sending EDIFACT (over Generic Exchange) messages to trading partners. Customer now wants to add a new domain to the current installation, for a second department. Much l