Can image data frames is shown at the rate of 30frames/sec, will it replace video. If so how?

Actually I dont have camera to acquire video signal, while I have to work on video compression technique H.261. I just wanted to ask that if I dont have camera, can I use the image data frames at the rate of 30frames/sec to show like video or can you suggest any other alternative?.
What labview library supports video compression?
Any example of implemented technique of video compression if any one can suggest?
Thanks in anticipation

Hi @info,
I would suggest you take a look at the Sequence and Save to
AVI.vi example.  This can be found by
searching the example finder for AVI. 
From the sounds of it this example dose very close or exactly what you
would like to do. As for the compression question I would suggest looking at
the AVI Compressor Comparison.vi
Message Edited by Adam_H on 05-28-2008 06:22 PM
Adam H
National Instruments
Applications Engineer

Similar Messages

  • Upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?

    upgraded my macbook pro to mountain lion from snow leopard does this mean i can upgrade my imac as well for the same price? And will it mess it up?

    You can upgrade the iMac for no extra charge - sign into the App Store there, download and install 10.8.
    I recommend that you make a backup (Time Machine is probably the easiest method) before you install, and make sure that you are not using any applications that are incomptible with 10.8 (eg Office 2004) - other than that, it should go smoothly.
    Matt

  • I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

    I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

    Authorize the computer in iTunes -- Store>Authorizie this computer.  Transfer the purchases from the iPad into iTunes and then you can sync with iTunes. Read this for instructions on transferring purchases from the iPad into iTunes.
    Transfer purchases.
    http://support.apple.com/kb/HT1848

  • My iPhone 5 dies at 20-24% it doesn't go all the way to 0%. Will apple replace my phone or fix my phone for free since its hardware problem and I have no money. This is my second iphone 5 replacement.

    My iPhone 5 dies at 20-24% it doesn't go all the way to 0%. Will apple replace my phone or fix my phone for free since its hardware problem and I have no money. This is my second iphone 5 replacement. I have no apple care so I'm worried. My phone has NEVER touched water! I only get 1/5 of battery use. I've also spent 30$ at the apple store on screen protectors for nothing! I really don't have 220$ nor 50$ I am on a strict budget. I believe I have to pay 220 not 50 ford a phone replacement for accidental damage. I don't know what category this falls under. I really need a new phone or battery. HELP! Will I have to pay? Also my screen lighting is all topsy-tervy every I put my screen on highest it won't work I have to wait about a minute? Forgot to mention that my apps exit out by themselves all the time when Im using them.

    So, have you tried a reset?  Restore from backup? Restore as new?  You seem to have a few problems but do not mention any action taken to resolve them.  What have screen protectors to do with anything?

  • I would like to be able to take a website that I use ofter and drop it on the firefox screen below the url. Then I will have a quick access. How do I do this?

    Question
    I would like to be able to take a website that I use ofter and drop it on the firefox screen below the url. Then I will have a quick access. How do I do this? I currently use this on my laptop, but recently bought a new computer and downloaded firefox and lost a lot of features that I enjoyed.

    Hi Ruthannw,
    I think you are talking about the [[Bookmarks Toolbar]]. That article will show you how to add sites to the toolbar and even how to display the toolbar if it is hidden in your new Firefox install.
    Hopefully this helps!

  • Updated my phone to the new software lost all my music, pictures/videos and apps, how to i get everything back?  someone help!

    updated my phone to the new software lost all my music, pictures/videos and apps, how to i get everything back?  someone help!

    You should have been sycning them with your computer all along.  Sync them from your computer back to the iphone.

  • Ios 5.1: my calendar dates are not shown in the notification center

    My calendar dates (from today and tomorrow) are not shown in the notification center. Under notifications I have activated the calendar app. What can Ido?

    IOS / is no out for a couple of weeks and Apple seems to be reluctant to fix this problem. As a business device it becomes rediculous to be not able to see my calender entries anymore in the notification center. Is Apple now leaving the business arena and focusing on toys ?

  • Hi, I can't open my iPhoto application. The app is there but will not open. What should I do?

    Hi, I can't open my iphoto application. The app logo is there but no photos pop up when I click on it. I am worried I will loose my photos. What should I do?

    what does happen? What has recently changed? Is iPhoto '08 and OS X 10.7.5 correct on versions?
    LN

  • Where to find additional data controls as shown in the WebCenter Dev Guide

    From this book " [Oracle® Fusion Middleware Developer's Guide for Oracle WebCenter 11g Release 1 (11.1.1)|http://fmwdocs.us.oracle.com/doclibs/fmw/E10285_01/appslib7/webcenter.1111/e10148/jpsdg_svc_intro.htm#JPSDG7276] ", it shows the following Data Controls in the Resource Palette:
    * Kudos Data Control
    * Notification Subscription Data Control
    * Page Data Control
    * People Connections Management Data Control
    etc.
    However, using JDeveloper downloaded from OTN and updated with WebCenter extensions, I only see one Data Control (i.e., Page Data Control) listed under WebCenter Services Catalog.
    If I want to use those additional Data Controls, where can I find them. Note that I'm an Oracle internal user.

    Hi,
    all the variable defined at package "How To Use the PLD Variables File in Release 8.8".
    -How to Use the PLD Variables.pdf
    -PLD_Vars_April2010.xls
    Try to search at the portal.
    Regards,
    Konstantin

  • How can a PowerPoint presentation be shown inside the front panel of a given application ?

    I´m developing a application and I thought it would be a great idea if I could somehow show a PowerPoint presentation inside its front panel. Can it be done using LabVIEW active x vis or can´t it be done at all ?
    Thanks in advance !!

    Like I said, I tried that option (and even got it work somehow, by connecting nodes from other places and using type casts), but I don't think it can manage that in a real app.
    After thinking about this some more, I've come to an unlikable conclusion - it's possible that there is no AX control for PP. Not for animation, anyway. If I remember correctly, when you open a PP presentation in Internet Explorer, you see the slides, but not the animation. If an AX control would exist, I'm sure IE would use it, which is why I think there probably isn't one.
    You can get a presentation into an AX container very easily by choosing the third option (open from file). Then, if you select a PP presentation, it will open in the container. However, if I remember correctly, you have no properties and methods to control it, and I don't think it will show the animation, so it's a bit useless.
    Maybe someone does know of a way...
    Try to take over the world!

  • My podcasts are on my iPod but they aren't shown in the 'Podcasts' area but when i go onto 'Videos' they're there. How do I get them to be shown in 'podcasts' as well?

    On my iPod Touch, I have around 100 podcasts. When I go on 'videos' they're listed under podcasts; but when I go onto 'Music', then onto 'More', then 'Podcasts', my podcasts aren't shown there. How do I get them to be shown on there??

    I can't find Podcasts or Videos on my ITunes library list on my computer? I know I have Podcasts on my IPhone but if I want to delete it in ITunes, how do I locate them? (This is not a reply but adding to the question above which was not answered)

  • Can someone please answer my question re the new download on my Mozilla Firefox browser called ALOT in how do I delete it as it keeps also producing videos when the computer is not being used. in English

    Recently I seem to have an extension to my firefox program in that I now have a tool bar and other features which all refer to ALOT. Is this harmful and can I delete this and if so how? Also I am running on 3.6.21 am I still ok and will the update be to Version 6 and compatible with XP, please?)

    http://www.exterminate-it.com/malpedia/remove-alot
    http://www.ehow.com/how_5108594_remove-lot-toolbar.html

  • How can I get Firefox 3.0 to work as a browser on my iBook G4 with OS10.3.9 so I can work my Hotmail email account? The download loads OK but will not open to a browser page when I double click on it. Tom.

    Have been using Firefox 2.0 just fine for years. But now stupid Windows Live Hotmail has made it impossible for me to "use" my email, such as doing Bcs or Attaching something, or even typing new text in the message box. Hotmail tells me I have to update my Firefox browser. But updating to Firefox 3.0 due my OS system limits does not now allow me to open onto the internet even after a successful download of 3.0. Tom.

    Firefox 3 will not run on OS X 10.3.9, it requires at least 10.4
    Try one of these browsers to see if you can access Hotmail - [http://www.seamonkey-project.org/releases/seamonkey1.1.19/ SeaMonkey 1.1.19] or [http://caminobrowser.org/download/ Camino 1.6.11]

  • How can I change my iTunes Store to the USA, so my apps will update? Dialog says my account is not valid in the Canadian store, switch to US. But it won't let me do it.

    My app updates in iPad won't install, when I hit update, it says my account is not valid in the Canadian store, and I must switch to the US store before purchasing. So, I sign out of Canadian store, and try to sign into US store, and that won't work either.
    It says my Apple ID is not valid in the US store, but it must be, because that's where I made my purchases of all those apps in the first place.
    Is it possible I am missing something here? Is this my fault? Can anybody offer a suggestion as to why I cannot sign into USA store?
    Thanks for any and all help.

    [Apologies to pdesteele for this slight OT bit, but it's all relevant to your question, I think ]
    We do have a place in the UK which we could use as an address, but for various reasons it gets a bit complex even though we still have a UK bank account. We moved to France when there were no iDevices and apps around, just bought the occasional music, so it wasn't a problem. Funny thing is I can't even download the free UK bank app because it's not available in the French store .
    I'll live with the problem for now as we plan to move back to the UK in a year or so - we miss the weather .

  • Can I delete an "event" but not the photos? Turn album in2 an event....how?

    If I get this right, an event basically equals every unique import of photos. Yet what am I to do if I dont want an event for every import, most especially when people email me one photo that i save to iphoto, that to me isnt a event. I spent hours upon hours creating 'albums' of what have now been coined my events.....so how do i take all the contents of one album that i created in iLife '07 and turn it into an event, even if the photos could have come from various imports along the way? iLife is telling me it's impossible, but there has to be a work around.
    So basically I want to be able to delete events, but not it's photos.
    And how do I turn my previous albums from iLife '07 & that include photos from various imports to one event in iLife '08.
    Thanks,
    Chris

    Chris
    If I get this right, an event basically equals every unique import of photos. Yet what am I to do if I dont want an event for every import, most especially when people email me one photo that i save to iphoto, that to me isnt a event. I spent hours upon hours creating 'albums' of what have now been coined my events...
    Not quite. Events are NOT albums, they are an updated version of the Rolls feature in v6. As with v6, every import created a Roll, but you can move pics between Events, create and edit them and so on, just like you could with Rolls. Your albums are not affected by this activity.
    Regards
    TD

Maybe you are looking for

  • Sapscript problem assignment

    hi all.,     i have a problem with form assignment,i have made complete print program for order quotation and layout. but when i execute from se 38 editor i get the selection screen and after giving the order number i am able to view the output layou

  • Configuring change pointer in SAP DEPOSIT MANAGEMENT system

    Hi, I am working on SAP Deposit Management system, which is very much similar to a normal R/3 system. I need to create a change pointer everytime a business partner is created or changed. Can you please guide me through the steps especially 1. what w

  • Auto re positioning of unselected photos on timeline

    I have several photos on my timeline that I am trying to sync with an audio file.  However, when I grab the edge of one of the photos to make it's time shorter, the photos downstream from it are following along and consequently do not stay where I wa

  • Replication Process Abending

    Hello All, Following is the scenario Source - HP-UX Oracle 10.2 add extract ext1 edit params ext1      extract ext1      setenv (NLS_LANG=AMERICAN_AMERICA.AL32UTF8)      userid ggs_owner, password ggs_owner      rmthost 115.124.104.167, mgrport 7809

  • Detect value change in a wire

    Hi, this seems pretty trivial, but I cannot find a clean way to do it, and i couldn't find anything in the forums. I want to detect a change in the value in a wire coming out of a "Get timestring VI", from iteration to iteration, and I dont think eve